Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

Minimum-Current-Stress Boundary Control Using Multiple-Phase-Shift-Based Switching Surfaces

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Current stress optimization of dual Buck-Boost integrated DAB three-port DC-DC converter

Study on dual active bridge DC-DC converter based on second dual-phase-shifting control

Analysis and Optimal Modulation for 2/3-Level DAB Converters to Minimize Current Stress with Five-Level Control

Modulation of 2/3-Level Dual-Active-Bridge DC-DC Converters for Soft-Switching and Minimum Current Stress.

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

Linearized Minimum Current Stress Modulation Scheme of Single-Phase Bidirectional DAB AC–DC Converters

An Asymmetrical Phase-Shift Scheme of Three-Phase Dual Active Bridge with Minimum Current Root-Mean-Square Value Control

Minimum Current Stress Control Strategy for Three Degree of Freedom Three-Phase Dual Active Bridge DC-DC Converter

A Phase Shift Control of Minimal Circulating Current and ZVS Turn-On for DAB Converter

DAB unified ZVS control strategy with optimal current stress in full power range under TPS control

An Asymmetrical Duty Cycle Control of Three Phase LCL Dual Active Bridge Converter to Reduce RMS Phase Current

A Novel Fast Transient Current Scheme for Three Phase Dual Active Bridge with Asymmetrical Phase-Shift Control

A Current-Stress-Optimized Design Method for Dual Active Bridge Converters With Improved ZVS Capability Under Wide Output Voltage Conditions

A Novel Light Load Performance Enhanced Variable-Switching-Frequency and Hybrid Single-Dual-Phase-Shift Control for Single-Stage Dual-Active-Bridge Based Ac/Dc Converter

Hybrid Duty Modulation for Dual Active Bridge Converter to Minimize RMS Current and Extend Soft-Switching Range Using the Frequency Domain Analysis

A Novel Three Phase LCL Dual Active Bridge Converter to Reduce RMS Phase Current