Abstract:Superplastic forming, as an advanced manufacturing method, is especially important for producing complex-shaped components for Mg-alloys. Superplasticity can be achieved through grain boundary sliding at elevated temperatures in high-alloyed Mg systems, with a typical grain size < 10 μm stabilized by high densities of intermetallic precipitates. However, it is difficult to stabilize small grains and facilitate grain boundary sliding in low-alloyed systems due to insufficient precipitates. Here, by utilizing a distinctive design strategy, i.e. introducing solute segregation to enhance stability of the fine-grained structure, we obtained an Mg-1Zn-0.2Ca-0.2Zr-0.1Ag (wt. %) alloy achieving ∼450% superplastic strain. Through quasi-in-situ Electron Backscatter Diffraction analyses, we investigated systematically microstructure evolutions during superplastic deformation of the alloy at different strains. It has been found that superplasticity is achieved through the absorption of intragranular dislocations by grain boundaries, which are associated with stress-driven grain boundary migration mediated by disclination-dislocation reactions. By using a theoretical description based on stress-driven grain boundary migration and disclination-dislocation reactions, our model can capture multiple superplasticity mechanisms (e.g., grain boundary sliding and grain rotation), which establishes a fundamental relationship between the evolution of microstructural defects and the strain accommodation during superplastic deformation. Our results not only suggest an effective way to achieve superplasticity in low-alloyed Mg systems, but also provide a new insight to elucidate the nature of superplasticity mechanism by revealing the intrinsic correlation between stress-induced grain boundary migration and disclination/dislocation motion.

Alloying effects on the plasticity of magnesium: Comprehensive analysis of influences of all five slip systems.

Plasticity Improvement of Mg Alloys with Alloying Atoms (Gd, Y)

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Origins and dissociation of pyramidal <c + a> dislocations in magnesium and its alloys

Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Large plasticity in magnesium mediated by pyramidal dislocations

Solute effect on basal and prismatic slip systems of Mg

Strategy to Enhance Intrinsic Ductility and Surface Stability of Mg-Zn-R (R = La to Sm) Alloys from a First-Principles Study

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Improving Ductility of a Mg Alloy Via Non-Basal Slip Induced by Ca Addition

Rate-dependent transition of dislocation mechanisms in a magnesium alloy

Revealing the role of pyramidal slip in the high ductility of Mg-Li alloy

Dominant Deformation Mechanisms in Mg–Zn–Ca Alloy

Research Progress on the Plastic Instability Phenomenon of Magnesium Alloys

Basal-plane Stacking-Fault Energies of Mg Alloys: A First-Principles Study of Metallic Alloying Effects

The effects of second-alloying-element on the formability of Mg-Sn alloys in respect of the stacking fault energies of slip systems

The Polycrystalline Plasticity Due to Slip and Twinning During Magnesium Alloy Forming

Generalized Stacking Fault Energy of {10-11}<11-23> Slip System in Mg-Based Binary Alloys: A First Principles Study

Origins of High Ductility Exhibited by an Extruded Magnesium Alloy Mg-1.8Zn-0.2Ca: Experiments and Crystal Plasticity Modeling

Controlling the Plastic Anisotropy of Magnesium Alloy by Tailoring the Grain Size and Yttrium Content