Tribological performances and self-lubricating mechanism of monomer casting nylon-6 composite coatings containing lube base oil-loaded microcapsules
Ping-Ping Gao,Zhao-Bo Sun,Ya-Jie Mao,Mingwang Pan,Xu Ji,Jian-Hua Tang,Kun Dai,Hao Lin,Gan-Ji Zhong,Zhong-Ming Li
DOI: https://doi.org/10.1016/j.porgcoat.2021.106528
IF: 6.6
2021-01-01
Progress in Organic Coatings
Abstract:The tribological properties of monomer casting nylon-6 (MC PA6) play an important role in ensuring energy consumption, component integrity and reliability in construction machinery. In this work, MC PA6 coatings containing different amount of lube base oil-loaded poly(urea-formaldehyde) microcapsules are prepared, and the tribological properties of the composite coatings are investigated. Compared with the pure coating, the friction coefficient and specific wear rate of the composite coating containing 20 wt% of oil-loaded microcapsules are 0.16 and 0.47 x 10(-5) mm(3)/Nm, which correspond to decreases of 56.7% and 91.8% respectively. Moreover, by introducing the oil-loaded microcapsules, the heat produced during friction is greatly reduced and the friction temperature of all composite coatings (similar to 40-50 degrees C) decreases more than 40 degrees C, as compared with that of pure coating (93.7 degrees C). Self-lubricating mechanism is investigated through microscopy and EDS analysis, which indicate that the improvement of tribological properties is attributed to the formation of uniform, continuous and thin lubricating film on the worn surface. This study would provide significant guidance for the design and preparation of MC PA6 composite coatings with high self-lubricating properties.