Abstract:An innovative planner in-band full duplexing antenna with quasi-isotropic radiation pattern is proposed for the first time in this article for Internet of Things (IoT)-based smart home and intravehicle wireless communication applications. The antenna consists of a radiating patch, a fence-strip resonator (FSR), and a ground plane with the same size as the radiating patch. The fence in the FSR located in the center plane of the patch has the function of simultaneously acting as a part of the resonator to improve the isolation between the transmitting port and the receiving port and as an electric current source for radiating a quasi-isotropic pattern. When the FSR resonates, a quasi-TEM field is formed mainly concentrated in the half of the antenna. The magnetic field generates surface electric current on the fence, and the electric field generates surface magnetic current on the open-ended aperture. The surface electric current and the surface magnetic current are not only orthogonal to each other but also have a phase difference of 90°. Theoretical analysis is provided to clarify the mechanism by which such a combination of radiation sources can generate a quasi-isotropic radiation pattern. To verify the proposed concepts, a high port isolation full duplexing antenna with quasi-isotropic radiation pattern is designed and fabricated, which has a compact size of $0.28\,\,\lambda _{0} \times 0.28 \lambda _{0}\times 0.042 {\lambda }_{0}$ ( ${\lambda }_{0}$ is the free space wavelength at 2.45 GHz). A measured isolation greater than 24 dB is achieved over the operating band from 2.42 to 2.50 GHz. The measurement results also show that the gain variation (GV) of port1 and port2 on the entire virtual radiation spherical surface is less than 6.88 and 6.74 dB, respectively.

Isolation Enhancement of Wideband Vehicular Antenna Array Using Fractal Decoupling Structure

Dual-Band Decoupling for Two Back-to-Back PIFAs

A compact wideband PIFA with metamaterial units loaded on the ground

Decoupling Between Two Back-to-Back PIFAs with Continuous Frequency Bands

Efficient Isolation of an MIMO Antenna Using Defected Ground Structure

Wideband Isolation Enhancement of Dual-Antenna Array Using Hybrid Decoupling Structures

Closely located dual PIFAs with T-slot induced high isolation for MIMO terminals

Wideband Gain Enhancement of High-Isolation and Quasi-Omnidirectional Metamaterial MIMO Antenna for Vehicular Radar

Wideband Dual-Polarized Magnetically Coupled Patch Antenna Array with High Port Isolation

Reducing Mutual Coupling for an Extremely Closely-Packed Tunable Dual-Element PIFA Array Through a Resonant Slot Antenna Formed In-Between

Compact and Wideband PIFA for DCS/PCS/UMTS/WLAN Communication System

Optimisation of asymmetries in mm-wave single-element fractal antenna for gain-bandwidth enhancement

Isolation Enhancement Between Two Low-Profile Patch Antennas for In-Band Full-Duplex Applications

Isolation Enhancement in Dual-Band MIMO Antenna by Using Metamaterial and Slot Structures for WLAN Applications

Wideband Folded Reflectarray Using Novel Elements with High Orthogonal Polarization Isolation

Novel Miniaturized Circularly Polarized Inverted-F Antenna with Planar Configuration

MIMO antenna system of two closely-positioned PIFAs with high isolation

Compact Wideband Dual-Polarized Antenna with High Isolation Using Modified Direct Feeding Structure for Indoor Beamforming Array Applications.

A Parallel Ladder Structure for Mutual Coupling Reduction to Ultra-Wideband Antenna in E-Plane

A Compact In-Band Full Duplexing Antenna with Quasi-Isotropic Radiation Pattern for IoT-Based Smart Home and Intravehicle Wireless Communication Applications

Design of Ebg with Fractal Structure on Pifa