Omniphobic Re-Entrant PVDF Membrane with ZnO Nanoparticles Composite for Desalination of Low Surface Tension Oily Seawater.

Bhaskar Jyoti Deka,Jiaxin Guo,Noman Khalid Khanzada,Alicia Kyoungjin An
DOI: https://doi.org/10.1016/j.watres.2019.114982
IF: 12.8
2019-01-01
Water Research
Abstract:In this study, an omniphobic membrane was fabricated by electrospraying fluorinated zinc oxide (ZnO) nanoparticles (NPs) mixed with polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) on the surface of an organosilane functionalized polyvinylidene difluoride (PVDF) membrane. Our results revealed that the functionalized ZnO NPs membrane exhibited a rough hierarchical re-entrant morphology with low surface energy which allowed it to achieve high omniphobic characteristics. It was observed that the addition of 30% ZnO (w/w of PVDF-HFP) was found to be optimal and imparted a high repulsive characteristic. The optimized PVDF/ZnO(30)/FAS/PVDF-HFP referred as cPFP-30Z membrane exhibited a high contact angle values of 159.0 +/- 3.1 degrees, 129.6 +/- 2.2 degrees, 130.4 +/- 4.1 degrees and 126.1 +/- 1.2 degrees for water, sodium dodecyl sulfate (SDS) saline solution (0.3 mM SDS in 3.5% NaCl), ethanol, and vegetable oil, respectively. The low surface energy and high surface roughness (Ra) of optimised membrane was assessed as 0.78 +/- 0.14 mN m(-1) and 1.37 mu m, respectively. Additionally, in contrast with the commercial PVDF membrane, the cPFP-30Z membrane exhibited superior anti-wetting/anti-fouling characteristics and high salt rejection performance (>99%) when operated with a saline oil solution (0.015 v/v) and SDS (0.4 mM) feed solutions. (C) 2019 Elsevier Ltd. All rights reserved.
What problem does this paper attempt to address?