Abstract:The percolation network of low-content rigid particles can effectively reinforce biomass polymers, which hopefully can solve the problem of renewable materials with low mechanical properties, such as the low strength and Young's modulus, and bad elongation at break. However, it hardly works in weakly compatible polymer/particle systems due to its poor dispersion and even if chemical modification can increase the compatibility so that nanoparticles can be well-dispersed, as a side effect it decreases the percolation reinforcement effect. Herein, we took the advantage of cellulose nanocrystals (CNCs) with high aspect ratio and realized a nonuniform modification on their chemical surface structure, where the modification focused on their middle part. The modified part could enhance the compatibility between CNCs and hydrophobic biomass polymers (eucommia ulmoide gum, EUG, in this work), when the unmodified ends still maintained the percolation properties. Increasing the aspect ratio of cellulose nanocrystals (CNCs) from 18 to 80, we found that the strength of the nanocomposites increased from 8.7 to 11.2 MPa (EUG/CNC-5). Importantly, the nonuniform modification, which was confirmed by AFM, further allowed the EUG to chemically cross-link with the middle part of CNCs, such that the crosslink network could be separated from the percolation network. The molecular movement of EUG in crosslink network was thus free of the percolation network, leading to a 3.2 times increase in elongation at break. The nonuniform modification strategy can thus control the multiple networks in weakly compatible composite systems and offer EUG-based materials, which usually suffer hard molecular movement, mechanical properties greater than the common petroleum-based rubbers and elastomers.

Enhancing and toughening plant oil-based polymeric materials through synergetic supramolecular and covalent interactions by introducing nucleobase-functionalized celluloses

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Plant Oil-Based Branched Polymer Coatings Enhanced with Nucleobases for Achieving Strong Adhesion and Outstanding Environmental Tolerance

Tuning Topology Towards Stronger and Tougher Polymers Inspired by Semi-Crystalline Cellulose Nanofibrils

Nucleobase-Tackified Renewable Plant Oil-Based Supramolecular Adhesives with Robust Properties Both under Ambient Conditions and Underwater

Nonuniformly modifying high-aspect-ratio rigid cellulose nanocrystals to enhance percolation advantage in weakly compatible biomass polymer systems

Constructing an interaction in plant polyphenol-modified carbon fiber with amylopectin-based waterborne polyurethane sizing agent via hydrogen bonding to improve the interfacial performance of carbon fiber/nylon 6 composites

Rational Design of Bioinspired Nucleobase‐Containing Polymers as Tough Bioplastics and Ultra‐Strong Adhesives

Hyperbranched dispersant modification of sisal cellulose based on hydrogen bonding interactions for strengthening natural rubber composite

Hybridization of cellulose nanocrystals modified ZnO nanoparticles with bio-based hyperbranched waterborne polyurethane sizing agent for superior UV resistance and interfacial properties of CF/PA6 composites

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

Reconstruction of Cellulose Intermolecular Interactions from Hydrogen Bonds to Dynamic Covalent Networks Enables a Thermo-processable Cellulosic Plastic with Tunable Strength and Toughness

Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Precise Control over Molecular Blocks to Achieve Robust Mechanical Properties of Bioinspired Nucleobase-Containing Polymers

Cellulose Modification for Improved Compatibility with the Polymer Matrix: Mechanical Characterization of the Composite Material

High-performance cellulose/thermoplastic polyurethane composites enabled by interaction-modulated cellulose regeneration

Establishing interphase with "rigid-flexible coupling" crosslinking network by supramolecular structure to improve interfacial properties of high modulus carbon fiber reinforced polymer composites

Strengthening Cellulose Acetate Via Solution-Reprocessible Dynamic Interaction with Poly(4-Pinacolatoborylstyrene) Cross-Linkers

Tough And Moldable Sustainable Cellulose‐Based Structural Materials via Multiscale Interface Engineering

Nanocomposites of Polyurethane Featuring Cellulose Nanocrystals and Dynamic Boronic Ester Bonds