Abstract:Solar driven interfacial evaporation is considered to be a low-carbon, environment-friendly technology for achieving efficient evaporation, but the solar still equipped with the interfacial evaporation structure is found to process low fresh water production rate and production efficiency. In this work, an optimization scheme for the interfacial evaporation structure of the solar still is proposed through the theoretical analysis of the heat and mass transfer process of the interfacial evaporation solar still. The theoretical results show that there are significant differences in the optimization design between the interfacial evaporation solar still and conventional solar stills. The fresh water production rate of interfacial evaporative solar still is less sensitive to the insulation performance of the solar still, while is greatly affected by the convective heat transfer process inside and outside the solar still. The solar still with interfacial evaporation structure can reduce the use of insulation materials to improve the illumination area and reduce the construction cost, without affecting the production efficiency of fresh water. Under the input energy intensity of 1 kW·m−2, when the convective heat transfer process inside the solar still is strengthened, the theoretical fresh water production rate of the interfacial evaporation solar still can be increased by 28 %, and the efficiency can reach 73 %. However, different from the optimization results of the traditional solar still, the enhancement of convective heat transfer process outside the glass cover will lead to the decline of the efficiency of the solar still. The experimental results show that in a monoclinic interfacial evaporation solar still with an evaporation surface area of 60 cm * 60 cm, a high system performance can be achieved by attaching a thin layer of insulation material to the inner wall and using a 2 W fan for forced convection of internal air. Under the outdoor environment with the maximum light intensity of 1 kW·m−2, the production efficiency of fresh water can be stabilized at 62.6 %. This work provides important guidelines for the design and optimization of solar still with interfacial evaporation structure.

A high-performing single-stage invert-structured solar water purifier through enhanced absorption and condensation

Enhancing vapor condensation efficiency of solar water purifier by rapid heat dissipation to bottom bulk water

High-Performance Janus Solar Evaporator for Water Purification with Broad Spectrum Absorption and Ultralow Heat Loss

High-efficiency solar-driven water purification enhanced by the in-plane temperature gradient and hydrated ions

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

Enhancing the Vapor Condensation Efficiency of a Solar Water Purifier by Rapid Heat Dissipation to Bottom Bulk Water

Solar steam-driven membrane filtration for high flux water purification

Environmental energy enhanced solar-driven evaporator with spontaneous internal convection for highly efficient water purification

Efficient solar-driven freshwater generation through an inner hierarchical porous metal-carbon layer bridging synergistic photothermal evaporation and adsorption-photodegradation

A Light-Permeable Solar Evaporator with Three-Dimensional Photocatalytic Sites to Boost Volatile-Organic-Compound Rejection for Water Purification

High performance reverse solar distiller with enhanced condensation and salt resistance

Stacked Dual-Interface Bi-Hydrophilic Structuration Boosting Solar Vapor-to-water Conversion

Thermal design strategy for enhanced freshwater harvesting with interfacial evaporation

All‐in‐One Solar Interfacial Evaporation System with Highly Effective Heat Management and Water Collection

A Lotus‐Petiole‐Inspired Hierarchical Design with Hydrophilic/Hydrophobic Management for Enhanced Solar Water Purification

Highly Efficient Water Harvesting with Optimized Solar Thermal Membrane Distillation Device

High Efficient 3D Solar Interfacial Evaporator: Achieved by the Synergy of Simple Material and Structure

A natural gain strategy of passive cycling water vapour escape toward efficient freshwater purification

Solar-Driven Multistage Device Integrating Dropwise Condensation and Guided Water Transport for Efficient Freshwater and Salt Collection

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

A Three-Dimensional Folded Multistage Distillation Device with Enhanced Air Convection for Efficient Solar Interface Evaporation