Abstract:Liquid-phase deposition of exfoliated 2D nanosheets is the basis for emerging technologies that include writable electronic inks, molecular barriers, selective membranes, and protective coatings against fouling or corrosion. These nanosheet thin films have complex internal structures that are discontinuous assemblies of irregularly tiled micron-scale sheets held together by van der Waals (vdW) forces. On stiff substrates, nanosheet vdW films are stable to many common stresses, but can fail by internal delamination under shear stress associated with handling or abrasion. This "re-exfoliation" pathway is an intrinsic feature of stacked vdW films and can limit nanosheet-based technologies. Here we investigate the shear stability of graphene oxide and MoSe2 nanosheet vdW films through lap shear experiments on polymer-nanosheet-polymer laminates. These sandwich laminate structures fail in mixed cohesive and interfacial mode with critical shear forces from 40 - 140 kPa and fracture energies ranging from 0.2 - 6 J/m2. Surprisingly these energies are higher than delamination energies reported for smooth peeling of ordered stacks of continuous 2D sheets, which we propose is due to energy dissipation and chaotic crack motion during nanosheet film disassembly at the crack tip. Experiment results also show that film thickness plays a key role in determining critical shear force (maximum load before failure) and dissipated energy for different nanosheet vdW films. Using a mechanical model with an edge crack in the thin nanosheet film, we propose a shear-to-tensile failure mode transition to explain a maximum in critical shear force for graphene oxide films but not MoSe2 films. This transition reflects a weakening of the substrate confinement effect and increasing rotational deformation near the film edge as the film thickness increases. For graphene oxide, the critical shear force can be increased by electrostatic cross-linking achieved through interlayer incorporation of metal cations. These results have important implications for the stability of functional devices that employ 2D nanosheet coatings.

Wrinkling and failure behavior of single-layer MoS 2 sheets under in-plane shear.

Natural Overlaying Behaviors Push the Limit of Planar Cyclic Deformation Performance in Few‐layer MoS2 Nanosheets

Wrinkling Process in a Single Silicene Sheet Caused by In-Plane Shear

Shear failure in supported two-dimensional nanosheet van der Waals thin films

Molecular Dynamics Simulation of Nanocrack Propagation in Single-Layer MoS 2 Nanosheets

Tensile Loading Induced Phase Transition and Rippling in Single-Layer MoS 2

In Situ Nanomechanical Characterization of Multi-Layer MoS2 Membranes: from Intraplanar to Interplanar Fracture.

Fracture Behaviors of Pre-Cracked Monolayer Molybdenum Disulfide: A Molecular Dynamics Study

Effect of Point Defects and Nanopores on the Fracture Behaviors in Single-Layer MoS2 Nanosheets

Mechanical Behaviors of MoS Nanowires under Tension from Molecular Dynamics Simulations

In-situ TEM investigation of MoS2 wrinkles and its effects on electrical properties

Delamination of MoS2/SiO2 Interfaces under Nanoindentation.

Bending Induced Interlayer Shearing, Rippling and Kink Buckling of Multilayered Graphene Sheets

The Buckling Behavior of Single-Layer MoS2 Sheets on Silica Substrates

A Molecular Dynamics Study on Wrinkles in Graphene with Simply Supported Boundary under In-Plane Shear

The buckling behavior of single-layer MoS2 sheets with kirigami-inspired structures under compression

Molecular Dynamics Study on the Mechanical Properties of Multilayer MoS2 under Different Potentials

Fracture Mechanics of Multi-Layer Molybdenum Disulfide

Vibration Characteristics of Wrinkled Single-Layered Graphene Sheets

Molecular Dynamics Simulations of Mechanical Properties of Monolayer MoS2

Nonlinear Static Bending and Forced Vibrations of Single-Layer MoS2 with Thermal Stress