Abstract:We explore a more concise process for the preparation of high-purity alumina and to address the problem of some conventional micro- and nano-adsorbents having difficulty in exposing their adsorption sites to target pollutants in solution due to the heavy aggregation of the adsorbent, which confers poor adsorption properties. The methods of using gamma-phase high-purity mesoporous alumina (HPMA), with its excellent adsorption properties and high adsorption rates of Congo Red, and of using lower-cost industrial aluminum hydroxide by direct aging and ammonium salt substitution were successfully employed. The results showed that the purity of HPMA was as high as 99.9661% and the total removal rate of impurities was 98.87%, a consequence of achieving a large specific surface area of 312.43 m2 g−1, a pore volume of 0.55 cm3 g−1, and an average pore diameter of 3.8 nm. The adsorption process was carried out at 25 °C, the concentration of Congo Red (CR) dye was fixed at 250 mg L−1 and the amount of adsorbent used was 100 mg. The HPMA sample exhibited an extremely fast adsorption rate in the first 10 min, with adsorption amounts up to 476.34 mg g−1 and adsorption efficiencies of 96.27%. The adsorption equilibrium was reached in about 60 min, at which time the adsorbed amount was 492.19 mg g−1 and the dye removal rate was as high as 98.44%. One-hundred milligrams of adsorbent were weighed and dispersed in 200-mL CR solutions with mass concentrations ranging from 50–1750 mg L−1 to study the adsorption isotherms. This revealed that the saturation adsorption capacity of the produced HPMA was 1984.64 mg g−1. Furthermore, the process of adsorbing Congo Red in the synthesized product was consistent with a pseudo-second order model and the Langmiur model. It is expected that this method of producing HPMA will provide a productive, easy and efficient means of treating toxic dyes in industrial wastewater.

Facile Preparation of Super Absorbent from Calcium-Aluminum Waste Residue and Its Application for Adsorption of Congo Red

An integrated strategy for ultra-efficient recovery and sustainable reuse of Congo red from wastewater

Efficient removal of refractory dyestuffs from textile wastewater by composite hydrated alumina derived from waste aluminum polishing solution

CRAB SHELL: A POTENTIAL HIGH-EFFICIENCY AND LOW-COST ADSORBENT FOR DYE WASTEWATER

Synthesis and Characterization of High-Purity Mesoporous Alumina with Excellent Adsorption Capacity for Congo Red

Lignosulfonate-Based Hybrid Hydrogels Functionalized with Hyperbranched Polyamide Amine as Ultra-High-Capacity Adsorbent for Congo Red Removal from Aqueous Solutions

Facile and template-free fabrication of hollow spherical AlOOH and Al2O3 from the waste aluminum residue: Growth mechanism and fast removal of Congo red

Fabrication of a corn stalk derived cellulose-based bio-adsorbent to remove Congo red from wastewater: Investigation on its ultra-high adsorption performance and mechanism

Thermal Modification of Aluminum Drinking Water Treatment Residuals for Removal of Congo Red from Water

Fabrication of polystyrene/CuO@calcined layered double hydroxide microspheres with high adsorption capacity for Congo red

Facile preparation of Fe2O3 Al2O3 composite with excellent adsorption properties towards Congo red

Fabrication and Characterization of Novel ZnAl-Layered Double Hydroxide for the Superadsorption of Organic Contaminants from Wastewater

Effective Adsorption of Congo Red by an Innovative Biochar/ldh-Derived MIL-100(Al): Investigation of Coexisting Pollutants and Mechanism Revelation

Sodium Dodecyl Sulfate Intercalated and Acrylamide Anchored Layered Double Hydroxides: A Multifunctional Adsorbent for Highly Efficient Removal of Congo Red

Development of Organovermiculite-Based Adsorbent for Removing Anionic Dye from Aqueous Solution

Synthesis of tannic acid based composite for efficient Congo red removal: Isotherm, kinetics, and thermodynamic studies

Effective removal of Congo red from aqueous solutions using ethylenediamine-modified wheat straw as adsorbent

Preparation of a Hierarchical Flower-Like Γ-Al2o3@c Composite Exhibiting Enhanced Adsorption Performance for Congo Red by High Temperature Transformation of Γ-Alooh@c Precursors

Removal of Methylene Blue Dyes from Wastewater Using Cellulose‐based Superadsorbent Hydrogels

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

Facile Access to Mesoporous Al 2 O 3 Nanofibers with Ribbon-Like Structure for Adsorptive Removal of Congo Red Dye from Water