Abstract:In recent years, due to the increase in the incidence of traffic accidents, the number of people with limb injuries has also increased. At the same time, among the aging population, neurological diseases or cardiovascular and cerebrovascular diseases have caused many people to have limb hemiplegia. It has been clinically proven that the use of rehabilitation equipment can help patients with limb injuries to restore limb motor function. This paper takes wearable lower limb rehabilitation exoskeleton as the research object, and its main contents are mechanical structure design, kinematics analysis, gait planning, virtual prototype simulation, and experimental verification and analysis. Based on the physiological characteristics of human body and the principle of comfortable and reliable wearing, this paper designs wearable exoskeleton for lower limb rehabilitation. Firstly, the physiological structure characteristics and movement mechanism of human lower limbs were studied and analyzed. By referring to the rotation range and height and size of each joint of human lower limbs, the overall scheme of wearable lower limb rehabilitation exoskeleton was designed and the degree of freedom was allocated. At the same time, Solidworks was used to establish a three-dimensional model. On the basis of a 3D model, a kinematics model was established, and the forward kinematics solution was obtained by using homogeneous coordinate transformation. Since the inverse kinematics solution was relatively complicated, the inverse kinematics solution was conducted in this paper according to the geometric relations of the joints of the lower limbs. Kinematics analysis of the exoskeleton structure of wearable lower limb rehabilitation was carried out to lay a theoretical foundation for gait planning. The off-line gait planning was carried out by using the method based on ZMP stability criterion, and the gait planning was divided into five stages: squat, start, middle step, stop and rise, and the motion trajectory of the center of mass and ankle joint was planned. Based on the inverse kinematics formula, the function of the change of joint angle with time in walking process is derived. The virtual prototype is established in ADAMS, and the simulation of virtual prototype is carried out by using the function of gait planning's joint angle and time. The correctness of structural design and gait planning was verified by measuring the trajectories of the centroid and ankle joints in each gait stage and the functional relationship between the rotation angle of each joint and time. Then, using a 3D dynamic capture system to capture the human lower limb motion trajectory of each joint, each joint trajectory data output, using the MATLAB software to output data, gets the joint trajectory change over time function curve and is used to verify feasibility and applicability of human gait planning. Through the research and analysis of the joints of the lower limbs of the human body, it can be concluded that the hip joint and the knee joint have 3 degrees of freedom, respectively, and the knee joint has 1 degree of freedom.

Biomechanical simulation analysis of human lower limbs assisted by exoskeleton

Human-machine Coupled Research of a Passive Lower Limb Exoskeleton for Walking Assistance

Design and analysis of a lower limb assistive exoskeleton robot

Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Mechanical Design and Optimization on Lower Limb Exoskeleton for Rehabilitation

Design of Lower Limbs Powered Exoskeleton

Biofusion design and parameter optimization for a novel passive assisted knee exoskeleton robot based on eight-bar mechanism

A simulation-based framework with a proprioceptive musculoskeletal model for evaluating the rehabilitation exoskeleton system

The Wearable Lower Limb Rehabilitation Exoskeleton Kinematic Analysis and Simulation

Design and Analysis of Upper Limb Passive Exoskeleton Robot for Lift Assist

Structure design and analysis of upper limb wearable passive power-assisted exoskeleton robot

Concept design of hybrid-actuated lower limb exoskeleton to reduce the metabolic cost of walking with heavy loads

Structural Design and Experimental Analysis of the Self-Balancing Lower Limb Exoskeleton Robot

Design and Simulation Study of the Translational-knee Lower Extremity Exoskeleton

Structure Design and Dynamic Simulation of the Lower Extremity Exoskeleton

Research on Assistance Evaluation and Online Optimization Method of Lower Limb Exoskeleton Based on Musculoskeletal Model

DESIGN AND MOTION CHARACTERISATION OF A WEARABLE LOWER LIMB REHABILITATION EXOSKELETON ROBOT

Configuration Design and Analysis of the Human-Machine Kinematically Compatible Type Exoskeleton Mechanism for Lower Limb Rehabilitation Training

Research on Passive Stride Assist Based on the Metabolism of Hip Muscles

A Wearable Lower Limb Exoskeleton: Reducing the Energy Cost of Human Movement