Abstract:Improving the efficiency of regulating the parameters of distribution network modes is an actual task for the energy sector, requiring a detailed analysis of the nature of the total electrical load graphs of 10/0.4 kV transformer substations. The complexity of the problem in consideration is due to the fact that the load variation of transformer substations 10/0.4 kV in residential areas occurs randomly, due to the significant number, wide range and probabilistic nature of the operating modes of connected consumers, and the lack of deterministic links between consumers of electricity. The investigated function of total load of transformer substations 10/0.4 kV on a daily interval is non-stationary, in this connection there was a necessity of allocation of stationarity areas for adjusting the process of regulation of parameters of electrical network modes. In order to solve this problem, total load graphs for 10/0.4 kV transformer substations located in a residential area were constructed based on experimental measurements of active and reactive loads. The use of these dependencies made it possible to analyse the distribution law for the active and reactive power of the total load of 10/0.4 kV transformer substations, which change in time is stochastic characterised. The use of probabilistic-statistical modelling was justified to reliably describe the load variation process of 10/0.4 kV transformer substations. The hypothesis of a normal law distribution of the functions under consideration was confirmed and parametric tests were performed. Fisher's F-criterion was used to confirm the hypothesis of variance constancy, and Student's t-criterion was used to confirm the hypothesis of mathematical expectation constancy. Using the fact of constancy of dispersions and expectations of investigated mode parameters, autocorrelation coefficients of investigated random functions were determined and autocorrelation function graphs were plotted. In order to approximate the functions under investigation, the autocorrelation function coefficients were determined using the least-squares method, and an analysis of the attenuation of the autocorrelation function was carried out. The calculations carried out have highlighted the areas of stationarity on the total load curves of the 10/0.4 kV transformer substations. These stationarity plots can be used for further modelling of load graphs and the formation of control actions to adjust the load of consumer regulators in order to equalise the overall electrical load graph, as well as for voltage regulation facilities, which will contribute to the required modes of operation of the electricity distribution networks.

Study of Electrical Loads of Individual Residential Buildings with the Subsequent Development of Regulatory Documents

Component Based On-line Modeling for Electric Loads

Calculation of electrical loads for decentralized power supply systems and the choice of power gas piston installations which use electrochemical energy storage

Load Profile of Typical Residential Buildings in Bulgaria

Evaluation of household electricity consumption in multi-apartment buildings for optimization of rooftop PV systems

A method of evaluating the effects of building power supply selection decisions on the city energy balance

Investigation and Analysis of Power Load Density for Commercial Buildings

Allocation of steady-state areas of total electrical load schedules of 10/0.4 kv transformer substations located in residential areas

Study on Household-Level Electricity Consumption of Domestic Consumers in Romania: The Need to Check the Electrical Installation

Methods of optimization energy consumption in residential and public buildings with the availability of alternative sources of energy supply

Peculiarities of Housing and Communal Services and the Difficulties of Implementing Energy-Saving Technologies: The Case of Kazakhstan

Energy Saving Strategy for Residential Buildings: Case Study in Armenia

Networked interactive solar panels over the roof photovoltaic system (PVS) and its cost analysis at Tashkent state technical University

Improving energy efficiency of rental housing

Sustainable development of the construction industry through the rational utilization of autonomous heat supply sources based on climate zoning

Innovations in Housing and Communal Services to Increase Real Incomes of the Russian Population

Analysis of Cooling Load Characteristics in Chinese Residential Districts for HVAC System Design

An Energy Planning Oriented Method for Analyzing Spatial-Temporal Characteristics of Electric Loads for Heating/cooling in District Buildings with a Case Study of One University Campus

Organization of investment design of housing and communal services

Modeling and Validation of Electrical Load Profiling in Residential Buildings in Singapore

Constructing Australian Residential Electricity Load Profile for Supporting Future Network Studies