Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Improvement of the Process of Removing Phosphorus from High-Phosphorus Distillery Effluent by Ferric Chloride Using Response Surface Methodology and Three-Step Method

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Research on Optimization for Phosphorus Removal with Ferrous Salt Process

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Pre-treatment of landfill leachate via coagulation-flocculation: Optimization of process parameters using response surface methodology (RSM)

A Novel Fe(II)-Ca Synergistic Phosphorus Removal Process: Process Optimization and Phosphorus Recovery.

Process optimization for PHA production by activated sludge using response surface methodology

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Applying hybrid coagulants and polyacrylamide flocculants in the treatment of high-phosphorus hematite flotation wastewater (HHFW): Optimization through response surface methodology

Investigating the recovery of ferrous phosphate in a fluidized bed crystallizer by response surface methodology

Efficient Removal of Phosphorus from Turbid Water Using Chemical Sedimentation by FeCl3 in Conjunction with a Starch-Based Flocculant

A combined process of chemical precipitation and flocculation for treating phosphating wastewater

Optimized O3/Fe(II) Using Response Surface Methodology for Organic Phosphorus Removal in Tetrakis(hydroxymethyl)phosphonium Sulfate Wastewater

Optimization of preparation and application of PPFS by response surface methodology

The Chemical-aid Phosphorus Removal from Municipal Wastewater with Limited Carbon Source

Optimization of coagulation–flocculation process for a paper-recycling wastewater treatment using response surface methodology

Optimization of Magnetic Coagulation Process for River Water Treatment Using the Response Surface Method

Optimization of Coagulation–flocculation Process for Papermaking-Reconstituted Tobacco Slice Wastewater Treatment Using Response Surface Methodology