Abstract:This paper considers optimal resource allocation for data collection from multiple ground devices (GDs) using a rotary-wing unmanned aerial vehicle (UAV). The UAV’s flight path, i.e., the sequence of moving positions, is given a priori due to requirements of e.g. patrol and inspection missions, whereas the UAV’s trajectory, i.e., the path and time schedule of movement, remains dependent on its hovering positions and flying speeds along the path. To improve the spectral and energy efficiency of the GDs, the UAV employs a directional antenna and performs wireless power transfer (WPT) to the GDs before collecting data from them. We jointly optimize the UAV’s flying speeds, hovering locations, and radio resource allocation (including time, bandwidth and transmit power) for minimization of the total energy consumption of the UAV required for completing data collection along the flying path. We show that given any flight path, the propulsion energy consumption of the UAV is a convex function of the flight speeds. However, due to the highly directive transmission, communication and flight of the UAV become strongly coupled and complicates the problem, e.g. the selection of the UAV’s hovering points will affect both the order of serving the GDs and the antenna gain of the UAV. Moreover, nonconvexity in the flight path constraints further obscures an efficient solution to the resource allocation problem. To tackle these challenges, we propose an iterative algorithm based on the branch-and-bound (BnB) method, which can obtain the globally optimal solution when the flight path coincides with the boundary of a convex set. Simulation results show that compared with several baseline algorithms, the proposed algorithm can significantly lower the energy consumption of the UAV during data collection.

Energy-Efficiency for Fixed-Wing UAV-Enabled Data Collection and Forwarding.

Communication and Trajectory Design in UAV-enabled Flying Network.

Energy-efficient Data Collection for UAV-assisted IoT: Joint Trajectory and Resource Optimization

Energy Minimization for UAV-Enabled Data Collection with Guaranteed Performance

Energy Consumption Minimization of Rotary-Wing UAVs for Data Distribution

Propulsion Energy Minimization for Fixed-Wing-UAV-Assisted Full-Duplex Mobile Relaying Via Hybrid Trajectory Design

3D Trajectory Optimization for Energy-Efficient UAV Communication: A Control Design Perspective

Time and Energy Efficient Data Collection Via UAV

Energy Minimization for Wireless Communication With Rotary-Wing UAV

Three-Dimensional Trajectory Design for Energy-Efficient UAV-Assisted Data Collection

Energy-Efficient UAV Communication with Multiple GTs Based on Trajectory Optimization

Energy-Efficient UAV Communication With Trajectory Optimization

Energy-efficiency Maximization for Fixed-Wing UAV-enabled Relay Network with Circular Trajectory

Three-Dimensional Trajectory Design for Unmanned Aerial Vehicle-Based Secure and Energy-Efficient Data Collection

A Global Optimization Method for Energy-Minimal UAV-Aided Data Collection over Fixed Flight Path

Trajectory Design of UAV Aided Wireless Information and Energy Provision.

Trajectory Design and Resource Allocation for UAV Energy Minimization in a Rotary-Wing UAV-enabled WPCN

Efficient Trajectory Planning for Optimizing Energy Consumption and Completion Time in UAV-Assisted IoT Networks

Trajectory and Communication Design for UAV-Relayed Wireless Networks

Energy-Efficient UAV Communications: A Generalised Propulsion Energy Consumption Model