Abstract:Azo dyes are the most widely used synthetic dyes in the printing and dyeing process. However, the discharge of untreated azo dyes poses a potential threat to aqueous ecosystems and human health. Herein, we fabricated a novel heterogeneous catalyst: activated-carbon-fiber-supported ferric alginate (FeAlg-ACF). Together with peroxymonosulfate (PMS) and visible light, this photocatalytic oxidation system was used to remove an azo dye—azophloxine. The results indicated that the proposed catalytic oxidation system can remove 100% of azophloxine within 24 min, while under the same system, the removal rates were only 92% and 84% when ferric alginate was replaced with ferric citrate and ferric oxalate, respectively, which showed the superiority of FeAlg-ACF. The degradation of azophloxine is achieved by the active radicals (SO4•− and •OH) released from PMS and persistent free radicals from activated carbon fiber. Moreover, due to ferric alginate’s highly intrinsic photosensitivity, visible radiation can further enhance the ligand-to-metal charge transfer (LMCT) processes. After 24 min of treatment, the total organic carbon of the azophloxine solution (50 μmol/L) decreased from 1.82 mg/L to 79.3 μg/L and the concentration of nitrate ions increased from 0.3 mg/L to 8.6 mg/L. That is, up to 93.5% of azophloxine molecules were completely degraded into inorganic compounds. Consequently, potential secondary contamination by intermediate organic products during catalytic degradation was prohibited. The azophloxine removal ratio was kept almost constant after seven cycles, indicating the recyclability and longevity of this system. Furthermore, the azophloxine removal was still promising at high concentrations of Cl−, HCO3−, and CO32−. Therefore, our proposed system is potentially effective at removing dye pollutants from seawater. It provides a feasible method for the development of efficient and environmentally friendly PMS activation technology combined with FeAlg-ACF, which has significant academic and application value.

Decomposition of Refractory Aniline Aerofloat Collector in Aqueous Solution by an Ozone/vacuum-Uv (O3/VUV) Process

Homogenous Catalytic Ozonation of Aniline Aerofloat Collector by Coexisted Transition Metallic Ions in Flotation Wastewaters

Degradation of Aniline in Water with Gaseous Streamer Corona Plasma

Degradation of 1-amino-4-bromoanthraquinone-2-sulfonic acid using combined airlift bioreactor and TiO2-photocatalytic ozonation

Ozone and Ozone/vacuum-Uv Degradation of Diethyl Dithiocarbamate Collector: Kinetics, Mineralization, Byproducts and Pathways

Degradation of Perfluorooctanoic Acid by UV/Chloride Process

Aniline degradation in aqueous solution by UV-aeration and UV-microO3 processes: Efficiency, contribution of radicals and byproducts

Degradation of aniline via microbial treated post Fe(II) or Co(II)/PMS advanced oxidation processes

The Oxidation Mechanism of Aniline by Ozone Water and Ozone Micro-nano Bubble Water and Its Influencing Factors

Rapid Removal of Azophloxine Via Catalytic Degradation by A Novel Heterogeneous Catalyst under Visible Light

Oxidation of aniline aerofloat in flotation wastewater by sodium hypochlorite solution

Comparison of Alkyl Xanthates Degradation in Aqueous Solution by the O3 and UV/O3 Processes: Efficiency, Mineralization and Ozone Utilization

Degradation Of Thiol Collectors Using Ozone At A Low Dosage: Kinetics, Mineralization, Ozone Utilization, And Changes Of Biodegradability And Water Quality Parameters

Degradation of Sodium N-Butyl Xanthate by Vacuum UV-ozone (VUV/O3) in Comparison with Ozone and VUV Photolysis

Removal of Aniline Aerofloat from Wastewater by Chelate Precipitation

Characterizing the Degradation of Refractory Organics from Incineration Leachate Membrane Concentrate by VUV/O3

Insights into the novel oxidation process of ozone/peracetic acid: Kinetics evaluation, degradation pathways, and toxicity assessment

A2O-MBR-BAF-O3 process for treating fractory domestic sewage mixed with industrial sewage

Degradation of Clofibric Acid by UV, O3 and UV/O3 Processes: Performance Comparison and Degradation Pathways.

A 2 O-MBR-BAF-O 3 process for treating fractory domestic sewage mixed with industrial sewage

Ozonation of Acenaphthene and the Characteristics of the Intermediate Products