Abstract:To improve the performance of the conventional auto-cascade refrigeration cycle, a modified auto-cascade refrigeration cycle with vapor injection is proposed for the application of a -80 ℃ freezer in this study. The particle swarm optimization algorithm is used to obtain the cycle performance at different operation conditions. The mixture concentration, compression ratio and condenser outlet quality are optimized globally. The binary mixture selection is carried out among the R1150/R290, R150/R600 and R1150/R600a. The results indicate that R1150/R600 is proposed as the alternative refrigerant. The performance comparisons between conventional and vapor injection auto-cascade refrigeration cycles show that the vapor injection technique efficiently improves system performance, especially at high condensation and low evaporation temperatures. Compared with the conventional auto-cascade refrigeration cycle, the optimal COP in the modified auto-cascade refrigeration cycles show a 9.3∼53.8% improvement in COP and the maximum improvement in the volumetric refrigeration capacity reaches 58.2% at low evaporation temperature. The statistical results of the optimal concentration of the mixture R1150/R600 at the selected operating conditions show that 88% of the optimal R600 concentration in the VARC cycle is in the range of 0.657∼0.699. The optimal concentration of R600 in the CARC cycle varies in a wide range of 0.57∼0.75. The optimal intermediate pressure is 38.1∼13.4% lower than the geometric mean of discharge pressure and evaporation pressure. The exergetic analyses illustrate that the largest exergy destruction of the VARC cycle occurs in the recuperator-2 instead of the compressor in CARC, contributing to 22.6∼23.5% of the total exergy destruction.

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle with R170/R290 for Freezers Application

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Energy and exergy analysis of zeotropic mixture R290/R600a vapor-compression refrigeration cycle with separation condensation

Performance Evaluation of an Ejector Subcooling Refrigeration Cycle with Zeotropic Mixture R290/R170 for Low-Temperature Freezer Applications

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Comparative Studies of Ejector-Expansion Vapor Compression Refrigeration Cycles for Applications in Domestic Refrigerator-Freezers

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Performance Analysis of an Ejector Enhanced Refrigeration Cycle with R290/R600a for Application in Domestic Refrigerator/freezers

Performance Analysis of an Advanced Ejector-Expansion Autocascade Refrigeration Cycle

Theoretical Study on a Vapor Compression Refrigeration System with Cold Storage for Freezer Applications

Performance Enhancement Of A Vapor-Compression Cycle With Cold Storage For Freezer Applications

Theoretical Analysis of a Double Ejector-Expansion Autocascade Refrigeration Cycle Using Hydrocarbon Mixture R290/R170

Theoretical Investigation on the Performance of an Ejector Enhanced Refrigeration Cycle Using Hydrocarbon Mixture R290/R600a

Thermodynamic Analysis on a Modified Ejector Expansion Refrigeration Cycle with Zeotropic Mixture (r290/r600a) for Freezers

Performance Assessment on a Modified Precision Refrigeration Cycle Using Low GWP Mixtures

Thermodynamic Performance Optimization and Analysis of an Auto-Cascade Refrigeration Cycle with Vapor Injection for Ultra-Low Temperature Freezer