Abstract:With the increasingly prominent problems of energy shortage and environmental pollution, the requirement for high-efficiency energy storage devices is becoming more urgent. Lithium-ion batteries (LIBs) are commonly used in portable electronic devices, such as laptops, mobile phones. However, their limited performances cannot meet the demands of ultrahigh energy density and safety in the fields of new energy vehicles and energy storage systems. The development and application of novel anode materials can increase the capacity of LIBs. Transition metal sulfides (TMSs) with ultrahigh theoretical capacity and chemical stability present bright application prospects. Among them, iron sulfide (FeSx) is regarded as one of the most promising anode materials due to its abundant reserves and environmental friendliness. However, the shortcomings of large volume expansion during cycling severely hinder the application of FeSx and other TMSs. Designing TMS anode materials with special structures and combining them with carbon-based materials can effectively improve their electrochemical performance. Constructing nanosized TMSs with a hierarchical hollow structural property is a common strategy to increase their cycling stability. The abundant free volume inside the hollow structure can serve as a buffer space for TMSs with severe volume expansion, greatly reducing the structural fracture phenomenon. The internal free volume is also conducive to the electrolytic penetration into the composites. In addition, the dense nanosheets on the surface enable the active materials to fully contact the electrolyte, and subsequently, more reaction sites are generated for the electrochemical reactions. Combining amorphous carbon with TMSs can increase the dispersity of composites and reduce the presence of agglomerated structures. The amorphous carbon layer can serve as a stable interface for electrochemical reactions, which is beneficial for maintaining high coulombic efficiency and structure retention during cycling. The disordered structures and defects inside the amorphous carbon layer can accelerate the transport of the electrolyte and Li+ ions. Moreover, the amorphous carbon layers can also provide a structural support network and electronic conduction paths for TMSs, thereby improving the electrochemical performance of composites. Polydopamine (PDA) demonstrates special “viscosity,” which can coat almost any material’s surface under a weak alkaline condition. After carbonization, PDA is carbonized into an amorphous carbon layer with nitrogen doping, and the increased carbon interlayer spacing and defects can serve as additional active sites for lithium storage. In this study, the hierarchical FeS2@FeS2@N,S-C hollow nanocubes are successfully synthesized by a series of solvothermal, PDA in-situ polymerization, and high-temperature vulcanization processes. The inner hierarchical hollow FeS2 is encapsulated in the heteroatom-doped carbon layer and in LIBs; the fabricated composites with a special structural property demonstrate improved electrode reaction kinetics. The results show that the discharge capacities of FeS2@FeS2@N,S-C are 505.6, 472.2, and 360 mAh/g at 0.2, 0.5, and 2 A/g, respectively. Moreover, the reversible capacity of 492.1 mAh/g is maintained after 500 cycles at 1 A/g, and the structure remains intact after cycling. The excellent electrochemical performance of FeS2@FeS2@N,S-C can be attributed to the heteroatom-doped carbon layer coating the hierarchical hollow structure and the synergistic effect of multiple components.

Novel 3D Flower-Like Micro/nano-Structure FeS/N-doped-C Composites As Advanced Cathodes with High Lithium Storage Performances

Synthesis of FeS@C-N Hierarchical Porous Microspheres for the Applications in Lithium/sodium Ion Batteries

Monodispersed FeS nanoparticles confined in 3D interconnected carbon nanosheets network as an anode for high-performance lithium-ion batteries

Yolk-shell Structured FeS0.5Se0.5@N-doped Mesoporous Carbon Composite As High-Performance Lithium-Ion Battery Anodes

An innovative double-Shell layer nitrogen and sulfur co-doped carbon-Encapsulated FeS composite for enhanced lithium-Ion battery performance

Hierarchical FeS&lt;sub&gt;2&lt;/sub&gt;@FeS&lt;sub&gt;2&lt;/sub&gt;@N,S-C Hollow Nanocubes for Lithium Storage

Micro-sized FeS2@FeSO4 Core-Shell Composite for Advanced Lithium Storage

Metal-organic Framework Derived Flower-Like FeS/C Composite As an Anode Material in Lithium-Ion and Sodium-Ion Batteries

Multifunctional carbon-confined FeS nanoparticles for a self-supporting and high-capacity cathode in lithium ion battery

FeNi2S4 QDs @C Composites As a High Capacity and Long Life Anode Material for Lithium Ion Battery and Ex Situ Investigation of Electrochemical Mechanism

3D Graphene Nanosheets Crosslinked Core–Shell FeS2@N, S Co-Doped Porous Carbon for Improved Lithium/Sodium Storage Performance

Hierarchical dopamine-derived N-doped carbon-encapsulated iron oxide/sulfide hollow nanospheres for enhanced lithium-ion storage

Self-templating synthesis of prismatic-like N-doped carbon tubes embedded with Fe3O4 as a high-efficiency polysulfide-anchoring-conversion mediator for high performance lithium-sulfur batteries

Design of Pyrite/carbon Nanospheres As High-Capacity Cathode for Lithium-Ion Batteries

Dodecylamine‐Induced Synthesis of a Nitrogen‐Doped Carbon Comb for Advanced Lithium–Sulfur Battery Cathodes

Controllable construction of flower-like FeS/Fe 2 O 3 composite for lithium storage

Controllable Fabrication of FeCoS4 Nanoparticles/S-doped Bowl-shaped Hollow Carbon As Efficient Lithium Storage Anode

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

Flexible FeS@Fe2O3/CNT composite films as self-supporting anodes for high-performance lithium-ion batteries

The morphology and electrochemical properties of porous Fe2O3@C and FeS@C nanofibers as stable and high-capacity anodes for lithium and sodium storage

Nitrogen-doped carbon nanotube sponge with embedded Fe/Fe3C nanoparticles as binder-free cathodes for high capacity lithium–sulfur batteries