Abstract:Multifunctional sensing devices with high flexibility, high sensitivity, and scalable fabrication are inevitable components of Internet of Things (IoT) for human–machine interfaces, structural health monitoring, and soft robots. Herein, high-performance flexible sensor arrays using carboxymethylcellulose (CMC) and its composite were developed for mechanical and thermal stimuli detection by laser direct writing. CMC contains abundant carbon precursors for strain-sensitive laser-carbonized CMC (LC-CMC), while the incorporation of graphene oxide (GO) into CMC leads to the formation of thermal-sensitive laser-carbonized GO/CMC (LC-GO/CMC). The LC-CMC-based strain sensor delivers gauge factors of 487.7 (strain < 8.5%) and 8557 (8.5% < strain < 14%), with long-term stability over 10 000 cycles. With 0.2 wt % GO, the LC-GO/CMC-based device provides a temperature coefficient of resistance of −0.289% °C <sup>–1</sup>, higher than the Cr-based commercial sensor. The potential application of the devices in IoT is proved by combining the near-field communication technology with the LC-CMC-based device to monitor the strain suffered by 316L stainless steel during the fatigue test. Moreover, an integrated device based on the strain and temperature sensing arrays accomplishes the simultaneous measurement of temperature and mechanical deformation in real time.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21168?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21168</a>.Photography of LC-CMC-based patterns; optical images of LC-CMC-based samples; calculation results of the heat transition process at the interface of the laser beam and CMC substrate; SEM, TEM, and XPS analyses of LC-CMC- and LC-GO/CMC-based samples; electrical response of the LC-GO/CMC-based temperature sensor under different concentrations of GO solution; application of the devices combining NFC technology with LC-CMC-based strain sensors to monitor the strain suffer by 316L materials during stretch–release cycles; table of conductivity and statistic data for widths of carbonization area of LC-CMC-based samples generated under different laser powers and writing speeds (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21168/suppl_file/am0c21168_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Multifunctional Green Sensor Prepared by Direct Laser Writing of Modified Wood Component

Scalable and Sustainable Approach Toward Highly Compressible, Anisotropic, Lamellar Carbon Sponge

Laser Direct Writing of Ga 2 O 3 /liquid Metal-Based Flexible Humidity Sensors

Bio-Graphene Sensors for Monitoring Moisture Levels in Wood and Ambient Environment

Laser Direct Writing of Flexible Sensor Arrays Based on Carbonized Carboxymethylcellulose and Its Composites for Simultaneous Mechanical and Thermal Stimuli Detection

Preparation of multifunctional porous carbon electrodes through direct laser writing on a phenolic resin film

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Superhydrophobic and high-performance wood-based piezoresistive pressure sensors for detecting human motions

Environmentally Friendly and Sensitive Strain Sensor Based on Multiwalled Carbon Nanotubes/Lignin-Based Carbon Nanofibers

Laser direct writing of a multifunctional superhydrophobic composite strain sensor with excellent corrosion resistance and Anti-Icing/Deicing performance

Processing Natural Wood into a High-Performance Flexible Pressure Sensor.

Laser-induced 3D wood-based skeleton covered with nanostructures for excellent photothermal conversion and electric conductivity

Rational Design of Amorphous Carbon-Coated Laminar-Structured Wood for Integrating Repeatable Early Fire Detection and High-Temperature Affordable Flexible Pressure Sensing in One System

High-Strength, High-Swelling-Resistant, High-Sensitivity Hydrogel Sensor Prepared with Wood That Retains Lignin

Sustainable wood electronics by iron-catalyzed laser-induced graphitization for large-scale applications

Conductive and superhydrophobic lignin/carbon nanotube coating with nest-like structure for deicing, oil absorption and wearable piezoresistive sensor

Wood Derived Composites for High Sensitivity and Wide Linear-Range Pressure Sensing.

Candle soot nanoparticles covered femtosecond laser-induced graphene toward multifunctional wooden houses

Flexible, recyclable and sensitive piezoresistive sensors enabled by lignin polyurethane-based conductive foam

A Novel and Ultrasensitive Nonenzymatic Glucose Sensor Based on Pulsed Laser Scribed Carbon Paper Decorated with Nanoporous Nickel Network

Enhanced electrical conductivity in laser-induced graphene-silicon carbide laminated nanosheets for flexible strain sensors and pulse wave velocity assessment