Biomass Gasification Employing Low-Temperature Carbonization Pretreatment for Tar Reduction

Kyoe Umeda,Shunsuke Nakamura,Ding Lu,Kunio Yoshikawa
DOI: https://doi.org/10.1016/j.biombioe.2019.05.002
IF: 5.774
2019-01-01
Biomass and Bioenergy
Abstract:Low-temperature carbonization pretreatment for processing solid biomass provides an alternative to the standard use of raw biomass as a gasification feedstock. This low-temperature process is characterized by a comparable heating value, grindability, bulk density, and hydrophobicity to those of the standard. This study investigated the gasification characteristics of biomass carbonized at 300 degrees C, 350 degrees C, and 400 degrees C, and compared them to those of raw biomass from a lab-scale gasification facility with air. Response factors to changes in parameter settings were tested, such as the gasification temperature and the equivalence ratio (ER). The product gas from biomass carbonized at 300 degrees C had a cold gas efficiency of only 9.9% less than raw biomass and produced 57.8 wt% less tar than raw biomass. It was found that an ER of 0.2 and a gasification temperature of 1,000 degrees C resulted in the optimum gasification performance for the 300 degrees C sample. Furthermore, the tar produced from the raw biomass, and the 300 degrees C sample during 500 degrees C pyrolysis was analyzed, and it was found that the tar produced from the raw biomass contained 27% higher molecular weight (higher than 301 g/mol), whereas the 300 degrees C sample contained only a 16% higher molecular weight. It is concluded that low-temperature carbonization pretreatment is effective for both gasification and the reduction of tar byproduct concentration.
What problem does this paper attempt to address?