Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Efficient Two-Way Shear Grillage Model Solution for Bridge RC Four-Pile Caps under Wall Loading

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Shear Capacity of a RC Bridge Deck Slab: Comparison Between Multilevel Assessment and Field Test

On Sectional Properties Correction of Grillage Model of Composite Bridges with Multi-box Girder

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Distribution of Shear Force: A Multi-Level Assessment of a Cantilever RC Slab

Probabilistic Code-Based Shear Capacity Model for I-shaped Steel Reinforced Concrete (SRC) Beams

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Numerical Modeling of Shear Behavior of Reinforced Concrete Pile Caps

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

Behavior of Model Steel H-Pile-To-Pile-Cap Connections

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Finite Element Analysis Of Load-Transferred Model Of The Reinforced Concrete Two-Pile Thick Caps

Rigidity and Moment Distribution of Steel-Concrete Composite Waffle Floor Systems Considering the Spatial Effect

Design of UHPC prestressed girders for shear

Theoretical modeling and dynamic analysis of designable grillages for repairing material surface defect

Simplified Design Method for the Shear Capacity of Steel Plate Shear-Strengthened Reinforced-Concrete Beams

One-dimensional Fiber Beam-Column Model and Two-Dimensional Fixed Crack Model for Numerical Simulation of UHPC Structures

Analysis and Design for Grillage Foundation with Rigid Area (II)