Abstract:<span class="a-plus-plus abstract-section id-a-sec1"> <h3 class="a-plus-plus">Abstract</h3> <p class="a-plus-plus">This study is an experimental investigation of the effectiveness and mechanism of a concept for bluff-body control characterized by combined windward suction and leeward blowing (WSLB). Wind tunnel tests are performed at a subcritical Reynolds number (<em class="a-plus-plus">Re</em>) of 3.33 × 10<sup class="a-plus-plus">4</sup>. Open-loop WSLB is used to control the flow around a cylindrical test model. Distributed suction and blowing nozzles are symmetrically arranged at the front and rear stagnation points. Steady suction and blowing are implemented simultaneously on both surfaces of the cylinder. WSLB control is characterized by the dimensionless momentum of the suction/blowing relative to the incoming airflow. Instantaneous pressure distributions on the midspan of the cylinder surface for the baseline and controlled cases are measured to quantify the modifications of WSLB control to the aerodynamic coefficients of the cylinder. In addition to surface pressure measurements, a particle image velocimetry (PIV) system is used to describe the wake flow structures of the baseline and controlled cylinders. Experimental results demonstrate that WSLB control decreases sectional drag at the midspan and reduces the fluctuating amplitudes of dynamic wind loads acting on the cylinder. The Strouhal number to characterize the vortex shedding frequencies of the controlled cylinders is also found to deviate from that of the natural cylinder. PIV measurement results show that the active blowing positioned at the leeward stagnation point forms a pair of vortices into the cylinder wake that modify the original vortex shedding process. As the blowing vortices convect into the wake, they stretch the unsteady shear flows from the upper and lower sides of the cylinder, increase the vortex-formation length and push the alternative vortex shedding further downstream. It is also shown that a steady and symmetric perturbation imposed on the periodic cylinder flow can reduce the von Karman vortices and modify the mode of wake vortex shedding significantly.</p> </span> <span class="a-plus-plus abstract-section id-a-sec2 outputmedium-all"> <h3 class="a-plus-plus">Graphical abstract</h3> <p class="a-plus-plus">With active control of windward suction and leeward blowing (WSLB), blowing positioned at the leeward stagnation point forms a pair of vortices in the cylindrical wake that modifies the typical vortex shedding process. As the blowing vortices convect downstream, they contribute to detaching the unsteady shear layers from the cylinder. It is shown that a steady and symmetric perturbation imposed on the periodic cylinder flow can lead to a symmetric mode of wake vortex shedding. <span class="a-plus-plus figure category-standard float-no id-figa"> <span class="a-plus-plus media-object"> <img alt="" src="https://static-content.springer.com/image/MediaObjects/348_2018_2676_Figa_HTML.png" class="a-plus-plus"/> </span> </span> </p> </span>

Self-Suction-and-Jet Control in Flow Regime and Unsteady Force for a Single Box Girder

Passive aerodynamic control of a single-box girder using self-issuing jets

Active control of flow structure and unsteady aerodynamic force of box girder with leading-edge suction and trailing-edge jet

Lift Augmentation Potential of the Circulation Control Wing Driven by Sweeping Jets

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Suppression of vortex-induced vibration of a box girder using active suction-jet slit

Dynamic kirigami structures for wake flow control behind a circular cylinder

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

Aerodynamics and surrounding flow patterns of a long-span bridge girder model with triple-separated boxes

Active control of the flow past a circular cylinder using online dynamic mode decomposition

Vortex-induced Vibration and Control of Split Three-Box Girder Bridges

Sweeping jet control of flow around a circular cylinder

Active control of circular cylinder flow with windward suction and leeward blowing

A zero-net-mass-flux wake stabilization method for blunt bodies via global linear instability

Primary instability, sensitivity and active control of flow past two tandem circular cylinders

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

Stall control on the wind turbine airfoil via the single and dual-channel of combining bowing and suction technique

Square cylinder flow controlled by a synthetic jet at one leading edge

Numerical study on passive-jet flow control for chamfered square cylinder

Control of circular cylinder flow via bilateral splitter plates

Enhancement of aerodynamic performance of a heaving airfoil using synthetic-jet based active flow control