Abstract:Selective laser melting (SLM) is a common technique categorized as one of the metal Additive Manufacturing (AM) processes to efficiently manufacture complex geometries. However, due to the diversity and difficulty in quantification of part geometry, it is hard to investigate different geometry, which is highly vital to the part quality, on the thermal behavior (TB) in the SLM process to ensure the part forming rate. To tackle this problem, a geometry feature equivalence (GFE) method was proposed to divide the geometric features into permutations and combinations of different GF elements. Firstly, common elements and uncommon elements were defined, where the former represents the element with the same track length in each track and the letter means the element has various track length in each track. Then, a finite element model was established and verified based on experiments to investigate the influence of GF elements on all kinds of TB including temperature variation, temperature changing rate, molten pool dimensions and lifetime. Next, for common elements, single-track model was analyzed to obtain the influence of the track length on the TB, which showed that the peak value of temperature, heating rate and cooling rate are at the starting point, and then gradually become stable with the track length increasing. After that, multi-track model was established to investigate the effect of the track number on the TB, which represented that the maximum heating rate keeps declining, the maximum cooling rate of each track are almost same, and the molten pool width and depth increase with the track number increasing. Moreover, two uncommon elements were designed and studied to obtain its TB, which demonstrates that even though the track length is the same in each track, different arrangement will bring out various temperature evolution. Finally, a thin-wall ring was built and measured based on experiments to validate the effectiveness of the proposed method. The proposed method can contribute to the part designer to obtain the TB of arbitrary geometric feature in design phase and guide the part geometry design and optimization.

Dimensionless analysis on selective laser melting to predict porosity and track morphology

Application of dimensional analysis to selective laser melting

Predicting the Porosity Defects in Selective Laser Melting (SLM) by Molten Pool Geometry

A Novel Data-Driven Dimensional Analysis Framework for Predicting Melt Pool Morphology and Porosity Evolution in Powder Bed Fusion

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Numerical Simulation of Selective Laser Melting Based on SPH Method

Development of a Comprehensive Model for Predicting Melt Pool Characteristics with Dissimilar Materials in Selective Laser Melting Processes

A numerical investigation of dimensionless numbers characterizing meltpool morphology of the laser powder bed fusion process

A Numerical Study on the Mesoscopic Characteristics of Ti-6Al-4V by Selective Laser Melting

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Experimental and computational study on thermal and fluid behaviours of powder layer during selective laser melting additive manufacturing

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

A method for geometric features equivalence to assess the thermal behavior in the selective laser melting process

Achievement of a Parameter Window for the Selective Laser Melting Formation of a GH3625 Alloy

A Comparative Study of Machine Learning Methods for Computational Modeling of the Selective Laser Melting Additive Manufacturing Process

Modeling and simulation of metal selective laser melting process: a critical review

Study on the Numerical Simulation of the SLM Molten Pool Dynamic Behavior of a Nickel-Based Superalloy on the Workpiece Scale

Selective Laser Melting under Variable Ambient Pressure: A Mesoscopic Model and Transport Phenomena

Porosity, Hardness, Friction and Wear Performance Analysis of H13 SLM-Formed Samples