Highly Efficient Electrochemical Conversion of CO2 and NaCl to CO and NaClO

Fengjiao Quan,Guangming Zhan,Huan Shang,Yahui Huang,Falong Jia,Lizhi Zhang,Zhihui Ai

DOI: https://doi.org/10.1039/c9gc01099h

IF: 9.8

2019-01-01

Green Chemistry

Abstract:Cathodic CO2 reduction and anodic salt oxidation are coupled for simultaneous production of CO and NaClO in high efficiencies.

What problem does this paper attempt to address?

Highly efficient ampere-level CO 2 reduction to multicarbon products via stepwise hollow-fiber penetration electrodes

Xiao Dong,Shoujie Li,Chang Zhu,Jianing Mao,Gangfeng Wu,Guihua Li,Guanghui Feng,Aohui Chen,Yiheng Wei,Xiaohu Liu,Jiangjiang Wang,Yanfang Song,Wei Chen,Wei Wei

DOI: https://doi.org/10.1016/j.apcatb.2023.122929

2023-06-03

Abstract:Efficient C 2+ production from CO 2 electrocatalytic reduction exhibits significant promise but suffers from low selectivity and undesired side reactions. Stepwise electroreductions of CO 2 to CO and then to C 2+ products can benefit from the perfect cooperation of the first high CO production efficiency and the subsequent favorable C-C coupling kinetics of CO. Herein, by virtue of serial Ag and Cu hollow-fiber penetration electrodes, a high-efficiency CO 2 electroreduction to C 2+ products is achieved with a partial current density of 1.8 A cm −2 and a faradaic efficiency of 90.5 %. Experimental results and density functional theory calculations demonstrate that the synergetic combination of unique penetration effect induced by hierarchical micro/nanostructured hollow fiber configurations and regulated electronic structures by chloride ion adsorption, is responsible for the superior activity. This work provides a facile tactic and encouraging headway to design applicable efficient CO 2 electrocatalytic reduction systems towards high-value C 2+ chemicals.

chemistry, physical,engineering, chemical, environmental
Efficient molten salt CO2 capture and selective electrochemical transformation processes toward carbon neutrality: advances, challenges, and prospects

Bowen Deng,Huayi Yin,Kaifa Du,Dihua Wang

DOI: https://doi.org/10.1007/s11426-023-1826-3

2023-10-22

Science China Chemistry

Abstract:Atmospheric carbon dioxide (CO 2 ) concentration has reached record levels due to excessive anthropogenic CO 2 emissions from massive industrial productions. Renewable-energy-driven CO 2 electroreduction is an effective method of directly converting CO 2 into various value-added chemicals or materials without subsequent geological disposal treatment. Owing to their promising thermal stability, wide electrochemical window, tunable oxo-basicity, and nontoxic nature, molten salt electrolytes endow intrinsic advantages, such as fast CO 2 absorption and selective electrochemical transformation, among different electrolyte species, wherein advanced carbon materials, CO, and hydrocarbons can be generated at relatively high current densities. Herein, we review the recent advances in molten salt CO 2 capture and electrochemical transformation (MSCC-ET) technologies, including reaction mechanisms, CO 2 absorption kinetics, electrode reaction kinetics, and product selectivity. This review highlights feasible strategies for regulating nanostructures, carbon product crystallinity, energy efficiency, overall CO 2 conversion efficiency, and MSCC-ET adaptability toward practical flue gases. Moreover, suitable cost-effective inert anode candidates for the oxygen evolution reaction are discussed.

chemistry, multidisciplinary
Toward an Understanding of the Enhanced CO 2 Electroreduction in NaCl Electrolyte over CoPc Molecule‐Implanted Graphitic Carbon Nitride Catalyst

Xinyi Tan,Chang Yu,Xuedan Song,Changtai Zhao,Song Cui,Hanyu Xu,Jiangwei Chang,Wei Guo,Zhao Wang,Yuanyang Xie,Jieshan Qiu

DOI: https://doi.org/10.1002/aenm.202100075

IF: 27.8

2021-06-19

Advanced Energy Materials

Abstract:Direct CO2 electrolysis in seawater enables the simultaneous conversion of CO2 into CO and the chlorine ions into Cl2, further meeting downstream industry needs such as phosgene synthesis and also facilitating the net consumption of CO2. As a result, the direct implementation of CO2 electrolysis in seawater is urgently required. Herein, a CoPc molecule-implanted graphitic carbon nitride nanosheets (CoPc/g-C3N4) electrocatalyst is prepared via a simple mechanochemistry method. The CoPc/g-C3N4 with a negatively charged surface and preferential adsorption capability for Na+ can achieve appreciable faradaic efficiency (FE, 89.5%) toward CO with a current density of 16.0 mA cm−2 in natural seawater and also realize long-term operation for 25 h in simulated seawater. Process monitoring further reveals that the chlorine ions in NaCl electrolyte can modulate the reaction microenvironment around the anode, which in turn has positive effects on the CO2RR in cathode. The CO2RR overall splitting in the simulated seawater exhibits a maximum FE of 98.1% towards CO at cell voltage of 3 V. This work describes the development of a carbon-coupled CoPc molecular catalyst that can drive the CO2 electrolysis in simulated seawater and provides a promising and energy-saving coupled reaction system for direct coproduction of CO and Cl2.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces

Jin Zhang,Chenxi Guo,Susu Fang,Xiaotong Zhao,Le Li,Haoyang Jiang,Zhaoyang Liu,Ziqi Fan,Weigao Xu,Jianping Xiao,Miao Zhong

DOI: https://doi.org/10.1038/s41467-023-36926-x

IF: 16.6

2023-03-09

Nature Communications

Abstract:Abstract Electrochemical CO 2 reduction (CO 2 R) to ethylene and ethanol enables the long-term storage of renewable electricity in valuable multi-carbon (C 2+ ) chemicals. However, carbon–carbon (C–C) coupling, the rate-determining step in CO 2 R to C 2+ conversion, has low efficiency and poor stability, especially in acid conditions. Here we find that, through alloying strategies, neighbouring binary sites enable asymmetric CO binding energies to promote CO 2 -to-C 2+ electroreduction beyond the scaling-relation-determined activity limits on single-metal surfaces. We fabricate experimentally a series of Zn incorporated Cu catalysts that show increased asymmetric CO* binding and surface CO* coverage for fast C–C coupling and the consequent hydrogenation under electrochemical reduction conditions. Further optimization of the reaction environment at nanointerfaces suppresses hydrogen evolution and improves CO 2 utilization under acidic conditions. We achieve, as a result, a high 31 ± 2% single-pass CO 2 -to-C 2+ yield in a mild-acid pH 4 electrolyte with >80% single-pass CO 2 utilization efficiency. In a single CO 2 R flow cell electrolyzer, we realize a combined performance of 91 ± 2% C 2+ Faradaic efficiency with notable 73 ± 2% ethylene Faradaic efficiency, 31 ± 2% full-cell C 2+ energy efficiency, and 24 ± 1% single-pass CO 2 conversion at a commercially relevant current density of 150 mA cm −2 over 150 h.

multidisciplinary sciences
Molten Salts CO 2 Transformation: Lower Energy Input and High-Yield Carbon Nanotubes Production Induced by Zinc Oxide

Peng Wang,Yanan Liu,Zhida Li,Deqiang Ji,Zhiqiang Qiao,Jing Zhang,Qinxin Jia,Hongjun Wu

DOI: https://doi.org/10.1149/1945-7111/ac175e

IF: 3.9

2021-08-01

Journal of The Electrochemical Society

Abstract:Molten salt electrochemistry is cited as one of the most efficient ways to convert stable but unwanted CO2 into value-added chemical fuels and functional materials, in particular carbon nanotubes (CNTs). In this work, we report the high yield and scalable CO2-deriving CNTs by adding ZnO to molten carbonate electrolyte. The physicochemical properties such as crystal structure, morphology and element composition of the carbon products were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive spectroscopy (EDS), X-ray diffractometer (XRD) and Raman spectrometer (Raman). It is demonstrated that an appropriate amount of ZnO additives can greatly increase the content of CNTs in carbon products. However, the micromorphology and microstructure of the carbon products are found to be significantly changed when the ZnO content is insufficient or excessive. Compared with molten salt electrolyte without ZnO, ZnO-included electrolyte endows CNTs with a higher degree of graphitization and crystallinity. This work demonstrates the feasibility of improving CNTs content in carbon products and lowering required energy for CNTs production by adding ZnO as a promoter.

electrochemistry,materials science, coatings & films
Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current

Min Zhang,Aihui Cao,Yucui Xiang,Chaogang Ban,Guang Han,Junjie Ding,Li-Yong Gan,Xiaoyuan Zhou

DOI: https://doi.org/10.1007/s40820-023-01264-6

2023-12-13

Abstract:Electrocatalytic reduction of CO2 converts intermittent renewable electricity into value-added liquid products with an enticing prospect, but its practical application is hampered due to the lack of high-performance electrocatalysts. Herein, we elaborately design and develop strongly coupled nanosheets composed of Ag nanoparticles and Sn-SnO2 grains, designated as Ag/Sn-SnO2 nanosheets (NSs), which possess optimized electronic structure, high electrical conductivity, and more accessible sites. As a result, such a catalyst exhibits unprecedented catalytic performance toward CO2-to-formate conversion with near-unity faradaic efficiency (≥ 90%), ultrahigh partial current density (2,000 mA cm-2), and superior long-term stability (200 mA cm-2, 200 h), surpassing the reported catalysts of CO2 electroreduction to formate. Additionally, in situ attenuated total reflection-infrared spectra combined with theoretical calculations revealed that electron-enriched Sn sites on Ag/Sn-SnO2 NSs not only promote the formation of *OCHO and alleviate the energy barriers of *OCHO to *HCOOH, but also impede the desorption of H*. Notably, the Ag/Sn-SnO2 NSs as the cathode in a membrane electrode assembly with porous solid electrolyte layer reactor can continuously produce ~ 0.12 M pure HCOOH solution at 100 mA cm-2 over 200 h. This work may inspire further development of advanced electrocatalysts and innovative device systems for promoting practical application of producing liquid fuels from CO2.
Remodelling the chlor-alkali electrolysis process to co-generate useful reduction products from CO2

Yifei Li,Anders Laursen,Mahak Dhiman,Gerard Charles Dismukes

DOI: https://doi.org/10.1039/d3ta03202g

IF: 11.9

2023-10-02

Journal of Materials Chemistry A

Abstract:Converting CO 2 into usable chemicals and fuels electrochemically is a promising method to close the carbon cycle and store intermittent renewable energy. However, on combining it with a typical anode, the oxygen evolution reaction (OER), results in both high energy consumption and produces only oxygen of little commercial value. Conversely, the chlor-alkali process is an established and profitable electrochemical process that produces Cl 2 and alkali (KOH). Herein, we demonstrate the feasibility of integrating the chlorine evolution reaction (CER) together with the CO 2 reduction reaction (CO 2 RR) to co-generate C 4 (2,3-furandiol) and C 3 (methylglyoxal) products. At a cell current of 1 mA, the system produces Cl 2 with a faradaic efficiency (FE) of ∼80% and CO 2 RR products at 100% faradaic efficiency without losses from crossover or degradation of the cathode. High faradaic efficiency is achieved for CO 2 RR products at higher current densities using a nickel phosphide Ni 2 P catalyst synthesized by a low temperature soft-template method. A technoeconomic assessment is presented that quantifies the economic advantage of combining the co-production of methylglyoxal and Cl 2 by integrating these two electrochemical processes.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Deficient activity of guanine nucleotide regulatory protein in erythrocytes from patients with pseudohypoparathyroidism.

M. Levine,R. Downs,M. Singer,S. Marx,G. Aurbach,A. M. Spiegel

DOI: https://doi.org/10.1016/0006-291X(80)90563-X

1980-06-30

Abstract:
Selective Electroreduction of Carbon Dioxide over SnO2-Nanodot Catalysts

Congling Hu,Lulu Li,Wanyu Deng,Gong Zhang,Wenjin Zhu,Xintong Yuan,Lei Zhang,Zhi-Jian Zhao,Jinlong Gong

DOI: https://doi.org/10.1002/cssc.202000557

IF: 8.4

2020-01-01

ChemSusChem

Abstract:The development of electrochemical CO2 conversion allows green carbon utilization. Formate and syngas are two typical products of electrochemical CO2 reduction, and the coproduction of these two products will maximize the energy efficiency of CO2 conversion. However, few works have successfully achieved the cogeneration of formate and syngas. This paper describes a novel strategy to maximize the efficiency of CO2 conversion through coproduction of formate and syngas on ultrasmall SnO2 nanodots (NDs) homogeneously anchored on carbon nanotubes (CNT#SnO2 NDs) electrodes. The CNT#SnO2 NDs not only decreased the adsorption energy of *OCHO but also reduced the adsorption energy difference of *COOH and *H. High energy efficiency toward formate and adjustable H-2/CO ratio were obtained over a broad potential window with long-term stability. In addition, CNT#SnO2 NDs and Ir foil were coupled together to construct an electrolyzer for electrochemical CO2 reduction reaction and oxygen evolution reaction (CO2ERR-OER), which also produced formate and syngas with 24 h stability. A promising approach is presented for the electrochemical CO2 conversion in fuel production.
Integration of CO 2 Capture and Electrochemical Conversion

Qing Xia,Kouer Zhang,Tingting Zheng,Liang An,Chuan Xia,Xiao Zhang

DOI: https://doi.org/10.1021/acsenergylett.3c00738

IF: 22

2023-06-01

ACS Energy Letters

Abstract:Integration of CO2 capture and CO2 conversion through electrochemical processes has emerged in recent years, offering a distinct advantage over the traditional independent methods by obviating the costly capture media recovery and compression steps. This review aims to provide a comprehensive overview of this promising research area. State-of-the-art studies of strategies involving independent processes, coupling in a single electrolytic cell, and integration into two electrolytic cells for CO2 capture and conversion are discussed. Furthermore, the energy and production costs for three alternative methods are assessed and compared to highlight the benefits of integration systems. In addition, our personal perspectives on the challenges and opportunities in this emerging field, including achieving high faradic efficiency and low cell voltage, seawater exploration, and membrane-less configuration for high-durability applications, are presented.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
CO2 electroreduction to multicarbon products in strongly acidic electrolyte via synergistically modulating the local microenvironment

Zesong Ma,Zhilong Yang,Wenchuan Lai,Qiyou Wang,Yan Qiao,Haolan Tao,Cheng Lian,Min Liu,Chao Ma,Anlian Pan,Hongwen Huang

DOI: https://doi.org/10.1038/s41467-022-35415-x

IF: 16.6

2022-12-09

Nature Communications

Abstract:Abstract Electrochemical CO 2 reduction to multicarbon products faces challenges of unsatisfactory selectivity, productivity, and long-term stability. Herein, we demonstrate CO 2 electroreduction in strongly acidic electrolyte (pH ≤ 1) on electrochemically reduced porous Cu nanosheets by combining the confinement effect and cation effect to synergistically modulate the local microenvironment. A Faradaic efficiency of 83.7 ± 1.4% and partial current density of 0.56 ± 0.02 A cm −2 , single-pass carbon efficiency of 54.4%, and stable electrolysis of 30 h in a flow cell are demonstrated for multicarbon products in a strongly acidic aqueous electrolyte consisting of sulfuric acid and KCl with pH ≤ 1. Mechanistically, the accumulated species (e.g., K + and OH − ) on the Helmholtz plane account for the selectivity and activity toward multicarbon products by kinetically reducing the proton coverage and thermodynamically favoring the CO 2 conversion. We find that the K + cations facilitate C-C coupling through local interaction between K + and the key intermediate *OCCO.

multidisciplinary sciences
Integrating Nickel-Nitrogen Doped Carbon Catalyzed CO2 Electroreduction with Chlor-Alkali Process for CO, Cl2 and KHCO3 Production with Enhanced Techno-Economics

Jin-Han Guo,Wei-Yin Sun

DOI: https://doi.org/10.1016/j.apcatb.2020.119154

2020-01-01

Abstract:Typically, CO2 electroreduction is coupled with oxygen evolution reaction (OER), which is highly energy consuming, and also costs alkalis formed at the cathode. Here, we use chlorine evolution reaction (CER), instead of OER, to integrate with CO2 electroreduction mediated by an efficient metal-nitrogen doped carbon catalyst derived from the mixture of nickel porphyrin and commercial carbon black. The combined system was evaluated in two electrolyzer configurations that have been adopted in the chlor-alkali process to produces CO, Cl-2, and KHCO3 simultaneously. To allow continuous operation, we designed a continuously operating system to collect produced KHCO3 in a precipitate tank with improved techno-economics and efficient CO2 utilization. Also, it could serve as an environmental-friendly alternative to the Solvay process for soda production. This work may provide a new strategy for the design of CO2 electrolysis systems with better economic viability.
A Direct Electrochemical Substitution Electrodialytic System for CO2 Conversion into High Value-Added Soda

Huangying Wang,Haiyang Yan,Kang Peng,Junying Yan,Rong Fu,Ruirui Li,Baoying Wang,Chenxiao Jiang,Yaoming Wang,Tongwen Xu

DOI: https://doi.org/10.1016/j.cej.2023.143686

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:The growth of CO2 emissions is a critical challenge to the global ecological system. Meanwhile, the rising use of evaporation units in industrial wastewater treatment plants has generated a large number of salts with low values for further valorization. In this study, a direct electrochemical substitution electrodialytic system is proposed for the conversion of CO2 and Na2SO4 into high value-added NaHCO3 and H2SO4. The CO2 is absorbed with poly-ethyleneimine and further metathesized with inorganic salts in an electrodialytic reactor. This unique system achieves soda preparation by avoiding the use of ammonia as a feedstock and demonstrates the ability to capture and convert CO2 at a specific energy consumption of 1.2 kWh/kg NaHCO3 and a current efficiency of 83%. This proof-of-concept study provides a highly effective technological pathway for the conversion of notorious wastes into valuable resources, creating possibilities for concurrent carbon reduction and wasted salt utilization.
A direct electrochemical substitution electrodialytic system for CO 2 conversion into high value-added soda

Huangying Wang,Haiyang Yan,Kang Peng,Junying Yan,Rong Fu,Ruirui Li,Baoying Wang,Chenxiao Jiang,Yaoming Wang,Tongwen Xu

DOI: https://doi.org/10.1016/j.cej.2023.143686

IF: 15.1

2023-05-28

Chemical Engineering Journal

Abstract:The growth of CO 2 emissions is a critical challenge to the global ecological system. Meanwhile, the rising use of evaporation units in industrial wastewater treatment plants has generated a large number of salts with low values for further valorization. In this study, a direct electrochemical substitution electrodialytic system is proposed for the conversion of CO 2 and Na 2 SO 4 into high value-added NaHCO 3 and H 2 SO 4 . The CO 2 is absorbed with polyethyleneimine and further metathesized with inorganic salts in an electrodialytic reactor. This unique system achieves soda preparation by avoiding the use of ammonia as a feedstock and demonstrates the ability to capture and convert CO 2 at a specific energy consumption of 1.2 kWh/kg NaHCO 3 and a current efficiency of 83%. This proof-of-concept study provides a highly effective technological pathway for the conversion of notorious wastes into valuable resources, creating possibilities for concurrent carbon reduction and wasted salt utilization.

engineering, chemical, environmental
Hierarchical micro/nanostructured silver hollow fiber boosts electroreduction of carbon dioxide

Shoujie Li,Wei Chen,Xiao Dong,Chang Zhu,Aohui Chen,Yanfang Song,Guihua Li,Wei Wei,Yuhan Sun

DOI: https://doi.org/10.1038/s41467-022-30733-6

IF: 16.6

2022-06-02

Nature Communications

Abstract:Abstract Efficient conversion of CO 2 to commodity chemicals by sustainable way is of great significance for achieving carbon neutrality. Although considerable progress has been made in CO 2 utilization, highly efficient CO 2 conversion with high space velocity under mild conditions remains a challenge. Here, we report a hierarchical micro/nanostructured silver hollow fiber electrode that reduces CO 2 to CO with a faradaic efficiency of 93% and a current density of 1.26 A · cm −2 at a potential of −0.83 V vs . RHE. Exceeding 50% conversions of as high as 31,000 mL · g cat −1 · h −1 CO 2 are achieved at ambient temperature and pressure. Electrochemical results and time-resolved operando Raman spectra demonstrate that enhanced three-phase interface reactions and oriented mass transfers synergistically boost CO production.

multidisciplinary sciences
A cascade of in situ conversion of bicarbonate to CO2 and CO2 electroreduction in a flow cell with a Ni-N-S catalyst

Linghui Kong,Min Wang,Yongxiao Tuo,Shanshan Zhou,Jinxiu Wang,Guangbo Liu,Xuejing Cui,Jiali Wang,Luhua Jiang

DOI: https://doi.org/10.1016/j.jechem.2023.09.024

IF: 13.1

2024-01-01

Journal of Energy Chemistry

Abstract:Combination of CO2 capture using inorganic alkali with subsequently electrochemical conversion of the resultant HCO 3 - to high-value chemicals is a promising route of low cost and high efficiency. The electrochemical reduction of HCO 3 - is challenging due to the inaccessible of negatively charged molecular groups to the electrode surface. Herein, we adopt a comprehensive strategy to tackle this challenge, i.e., cascade of in situ chemical conversion of HCO 3 - to CO2 and CO2 electrochemical reduction in a flow cell. With a tailored Ni-N-S single atom catalyst (SACs), where sulfur (S) atoms located in the second shell of Ni center, the CO2 electroreduction (CO2ER) to CO is boosted. The experimental results and density functional theory (DFT) calculations reveal that the introduction of S increases the p electron density of N atoms near Ni atom, thereby stabilizing *H over N and boosting the first proton coupled electron transfer process of CO2ER, i.e., *+e–+*H+*CO2→*COOH. As a result, the obtained catalyst exhibits a high faradaic efficiency (FECO ∼ 98%) and a low overpotential of 425 mV for CO production as well as a superior turnover frequency (TOF) of 47397 h−1, outcompeting most of the reported Ni SACs. More importantly, an extremely high FECO of 90% is achieved at 50 mA cm−2 in the designed membrane electrode assembly (MEA) cascade electrolyzer fed with liquid bicarbonate. This work not only highlights the significant role of the second coordination on the first coordination shell of the central metal for CO2ER, but also provides an alternative and feasible strategy to realize the electrochemical conversion of HCO 3 - to high-value chemicals.

chemistry, physical,engineering, chemical, applied,energy & fuels
Highly selective electrocatalytic Cl− oxidation reaction by oxygen-modified cobalt nanoparticles immobilized carbon nanofibers for coupling with brine water remediation and H2 production

Qizhong Xiong,Xian Zhang,Qipeng Cheng,Guoqiang Liu,Gang Xu,Junli Li,Xinxin Ye,Hongjian Gao

DOI: https://doi.org/10.1007/s12274-020-3200-3

IF: 9.9

2020-11-19

Nano Research

Abstract:Combining the H2 production with brine remediation is regarded as a sustainable approach to achieving clean H2 energy. However, designing stable Cl− oxidation reaction (COR) electrocatalyst is the key to realize this route. Herein, a type of oxygen-modified Co nanoparticles anchored graphitic carbon nanofibers catalyst (Co/GCFs) was synthesized through a two-step strategy of adsorption and pyrolysis. The Co/GCFs-2.4 exhibits high selectivity and stability for COR at neutral electrolyte. It is worth noting that unlike the water oxidation, the chemical valence of cobalt has not changed during the COR. Further results demonstrated that the oxygen-modified Co nanoparticles provide active sites for selective COR, meanwhile, the graphitic carbon gives rise to strong catalytic stability. Thanks to the superior COR and H2 production activity of Co/GCFs-2.4, a two-electrode brine electrocatalysis system employing Co/GCFs-2.4 as both cathode and anode for H2 production exhibited robust stability, efficient and high Faraday efficiency (98%-100%). We propose that this work provides a novel strategy for designing efficient and stable catalysts with electrocatalytic COR and HER activities at neutral brine water for practically coupling with H2 production by water electrolysis and brine water remediation.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Steering C–C Coupling by Hollow Cu2O@C/N Nanoreactors for Highly Efficient Electroreduction of CO2 to C2+ Products

Xiangfu Meng,Hao Huang,Xiaoxiao Zhang,Lin Hu,Haibin Tang,Miaomiao Han,Fangcai Zheng,Hui Wang

DOI: https://doi.org/10.1002/adfm.202312719

IF: 19

2024-02-16

Advanced Functional Materials

Abstract:The manuscript designs a hollow cuprous oxide protected by a thin N‐doped carbon shell (H–Cu2O@C/N) as an efficient nanoreactor to stabilize the Cu+ species and enhance the coverage concentration of *CO on the local catalyst surface under the spatial confinement effect, which efficiently accelerates C–C coupling to generate C2+ products. Electrochemical CO2 reduction reaction offers a promising pathway to transform renewable electricity into value‐added fuels and feedstocks in the form of chemical energy. However, the *CO intermediates tend to obtain protons or electrons to generate C1 products. The Cu+, an active catalytic site for C2+ products, is easily reduced to Cu0 at cathodic potentials. Herein, a hollow cuprous oxide protected by a thin N‐doped carbon shell (H–Cu2O@C/N) as an efficient nanoreactor to stabilize the Cu+ species and enhance the coverage concentration of *CO on the local catalyst surface under the spatial confinement effect is designed, which efficiently accelerates C–C coupling to generate C2+ products. As a result, H–Cu2O@C/N exhibits an outstanding C2+ Faradaic efficiency of 75.9% with a partial current density of 248.8 mA cm−2 in the membrane electrode assembly (MEA) electrolyzer. Density functional theory combined with operando characterizations confirm that the N‐doped carbon layer protects the Cu+ active species from electrochemical reduction, and the high coverage density of *CO from spatial confinement effect lowers the reaction barrier of *CH2CHO, thereby promoting C–C coupling. This work offers invaluable insights into the spatial confinement effect for boosting the steering C–C coupling in Cu‐based catalysts for efficient electroreduction of CO2 to C2+ products.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Surface Co-Modification of Halide Anions and Potassium Cations Promotes High-Rate CO2-to-Ethanol Electrosynthesis

Chen Peng,Songtao Yang,Gan Luo,Shuai Yan,Mohsen Shakouri,Junbo Zhang,Yangshen Chen,Weihan Li,Zhiqiang Wang,Tsun-Kong Sham,Gengfeng Zheng

DOI: https://doi.org/10.1002/adma.202204476

IF: 29.4

2022-01-01

Advanced Materials

Abstract:The high-rate electrochemical CO2 conversion to ethanol with high partial current density is attractive but challenging, which requires competing with other reduction products as well as hydrogen evolution. This work demonstrates the in situ reconstruction of KCuF3 perovskite under CO2 electroreduction conditions to fabricate a surface fluorine-bonded, single-potassium-atom-modified Cu(111) nanocrystal (K-F-Cu-CO2 ). Density functional theory calculations reveal that the co-modification of both F and K atoms on the Cu(111) surface can promote the ethanol pathway via stabilization of the CO bond and selective hydrogenation of the CC bond in the CH2 CHO* intermediate, while the single modification of either F or K is less effective. The K-F-Cu-CO2 electrocatalyst exhibits an outstanding CO2 -to-ethanol partial current density of 423 ± 30 mA cm-2 with the corresponding Faradaic efficiency of 52.9 ± 3.7%, and a high electrochemical stability at large current densities, thus suggesting an attractive means of surface co-modification of halide anions and alkali-metal cations on Cu catalysts for high-rate CO2 -to-ethanol electrosynthesis.
Fast Seawater Desalination Integrated with Electrochemical CO2 Reduction

Yuan Chen,Huiling Hu,Minxian Han,Huan Lin,Jinhong Dai,Kaixiang Shen,Minzhang Li,Xuncai Chen,Afzalshoh Qahramon Zarifzoda,Fangzhou Liu,Fuming Chen

DOI: https://doi.org/10.1002/anie.202415806

2024-12-04

Angewandte Chemie International Edition

Abstract:Coupling desalination with electrocatalytic reactions is an emerging approach to simultaneously addressing freshwater scarcity and greenhouse gas emissions. However, the salt removal rate in such processes is slow, and the applicable water sources are often limited to those with high salt concentrations. Herein, we show high-performance electrocatalytic desalination by coupling with electrochemical CO2 reduction using a carbon catalyst. A ZIF-8-derived carbon catalyst embedded with Cu nanoparticles delivers a high Faradaic efficiency of 94.3% for CO production at 288 μmol cm-2 h-1. The efficient CO2 electroreduction generates high current densities, which drive fast salt ion transfer across ion exchange membranes. The integrated device enables one of the quickest salt removal rates of 1043.49 μg cm-2 min-1 among various desalination methods. Drinking water can be obtained with an ion removal rate of 99% when natural seawater is used as the water source.

chemistry, multidisciplinary

Highly Efficient Electrochemical Conversion of CO2 and NaCl to CO and NaClO

Highly efficient ampere-level CO 2 reduction to multicarbon products via stepwise hollow-fiber penetration electrodes

Efficient molten salt CO2 capture and selective electrochemical transformation processes toward carbon neutrality: advances, challenges, and prospects

Toward an Understanding of the Enhanced CO 2 Electroreduction in NaCl Electrolyte over CoPc Molecule‐Implanted Graphitic Carbon Nitride Catalyst

Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces

Molten Salts CO 2 Transformation: Lower Energy Input and High-Yield Carbon Nanotubes Production Induced by Zinc Oxide

Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current

Remodelling the chlor-alkali electrolysis process to co-generate useful reduction products from CO2

Deficient activity of guanine nucleotide regulatory protein in erythrocytes from patients with pseudohypoparathyroidism.

Selective Electroreduction of Carbon Dioxide over SnO2-Nanodot Catalysts

Integration of CO 2 Capture and Electrochemical Conversion

CO2 electroreduction to multicarbon products in strongly acidic electrolyte via synergistically modulating the local microenvironment

Integrating Nickel-Nitrogen Doped Carbon Catalyzed CO2 Electroreduction with Chlor-Alkali Process for CO, Cl2 and KHCO3 Production with Enhanced Techno-Economics

A Direct Electrochemical Substitution Electrodialytic System for CO2 Conversion into High Value-Added Soda

A direct electrochemical substitution electrodialytic system for CO 2 conversion into high value-added soda

Hierarchical micro/nanostructured silver hollow fiber boosts electroreduction of carbon dioxide

A cascade of in situ conversion of bicarbonate to CO2 and CO2 electroreduction in a flow cell with a Ni-N-S catalyst

Highly selective electrocatalytic Cl− oxidation reaction by oxygen-modified cobalt nanoparticles immobilized carbon nanofibers for coupling with brine water remediation and H2 production

Steering C–C Coupling by Hollow Cu2O@C/N Nanoreactors for Highly Efficient Electroreduction of CO2 to C2+ Products

Surface Co-Modification of Halide Anions and Potassium Cations Promotes High-Rate CO2-to-Ethanol Electrosynthesis

Fast Seawater Desalination Integrated with Electrochemical CO2 Reduction