Abstract:<p>As one of the prefabricated structures, precast segmented bridges can be used to shorten construction time, reduce traffic delays, improve quality control, and minimize environmental impact. Despite the numerous advantages of segmented pre-fabricated rapid assembly technology, it is not widely used in high seismic hazard zones nor applied to complex water-abundant situations because of the lack of knowledge on its seismic performance. Through experimental and numerical studies, researchers have studied the seismic performance of such type of column under quasi-static testing. The behaviors of the column or bridge under desired strong ground motions (GMs) have been rarely investigated. This paper presents the major findings of an underwater shaking table testing program conducted on a 1/4 scaled single-span bridge with novel self-centering segmented concrete-filled steel tube columns. This study focuses on the performance of the bridge subjected to different GMs under 4 water conditions, which are with water at a height of 1.2 m, 1.5 m, 1.8 m, and without water. The bridge model incorporated two post-tensioned precast self-centering segmented concrete-filled steel tube (PSCFST) single columns with fixed and sliding supports connected to a single span steel box-girder superstructure. The internal unbonded PT tendons are installed at the center of the segment section, and external energy dissipation (ED) bars are installed on the outside of the bottom segment. The bridge model was then subjected to a sequence of natural and artificial GMs with different amplitudes. The well-designed PSCFST bridge demonstrated a desirable seismic performance, and no significant damage was observed. Concerning the overall response of the structure, the maximum drift ratio reached 2.14%. Moreover, a maximum residual drift of 0.09% was observed after the tests, which indicates that the test model demonstrated a desirable self-centering capability after a sequence of GMs. The cumulative energy dissipation and equivalent viscous damping ratio of the bridge were calculated. A comparison is made for the seismic performance of the bridge especially in terms of the displacement and acceleration of the whole structure under the cases of with and without water.</p>

Experimental and Numerical Investigations on Seismic Behavior of Prefabricated Bridge Columns with UHPFRC Bottom Segments

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Design and seismic performance of precast segmental bridge columns repaired with UHPC jacket after earthquake-induced damage

Behavior of a Precast Bridge Pier with Basalt Fiber-Reinforced Polymer (BFRP)-Strengthened Segments under Seismic Loading

Innovative Methods to Improve the Seismic Performance of Precast Segmental and Hybrid Bridge Columns under Cyclic Loading

Seismic performance of bridge with unbonded posttensioned self-centering segmented concrete-filled steel-tube columns: An underwater shaking table test

Seismic performance of a new type of prefabricated bridge pier with cast-in-place UHPC jacketing

Seismic Experiment and Analysis of Rectangular Bottom Strengthened Steel-Concrete Composite Columns

Cyclic loading test of self-centering precast segmental concrete high-speed railway bridge columns with UHPC-filled duct connections

Experimental and numerical study on seismic performance of precast segmental CFST bridge columns with non-uniform prestressed steel tendons

Experimental and Numerical Investigations on the Mechanical Properties of Precast Segmental Barriers with UHPC Connections

Seismic performance assessment of different fibers reinforced concrete columns using incremental dynamic analysis

Flexural Behavior of the Composite Girder of a Prestressed Segmental UHPC Channel and a Reinforced Conventional Concrete Deck

Numerical Investigations on Seismic Behavior of Segmental Assembly of Concrete Filled Steel Tube Piers with External Replaceable Energy-Dissipating Links

Numerical Investigation of the Performance of Segmental CFST Piers with External Energy Dissipators under Lateral Cyclic Loadings

Quasi-static tests and seismic fragility analysis of RC bridge piers with high-strength steel bars and high-strength/ultra-high performance concrete

Shear behavior of precast ultrahigh-performance concrete (UHPC) segmental beams with external tendons and dry joints

Experimental Study on the Seismic Behaviour of Reinforced Concrete Bridge Piers Strengthened by BFRP Sheets

Cyclic behavior of unbonded post-tensioned precast segmental concrete columns fabricated by 3D printed concrete permanent formwork