Abstract:Since solid propellants can significantly increase the mobility, load, and range of missile weapons and equipment when used as a power source, energy performance is always the primary focus of solid propulsion technology development. This paper investigated differences in the agglomeration of aluminum (Al) and characteristics of the burning surface of nitrate ester plasticized polyether (NEPE) propellants and hydroxyl-terminated polybutadiene (HTPB) propellants. The experiments were conducted under a 0.1 MPa argon gas atmosphere using a high-speed camera combined with a telephoto microscope head (macro lens). In comparison with HTPB propellants, it was discovered that the agglomeration process of Al particle of NEPE propellants had two modes. Al aggregates exit the burning surface after growing into nearly spherical agglomerates in Mode A, which is comparable to HTPB propellants. Unique to NEPE propellants, Mode B is where the Al particles aggregate into massive coral-like structures. Three factors could account for this discrepancy. First, since NEPE propellants include less ammonium perchlorate (AP), the AP is less likely to form a pocket structure. It keeps the Al particles in a large "pocket" resembling the burning surface and provides advantages for their ability to aggregate. Second, NEPE propellants have a thicker molten layer on the burning surface. It has a capillary force impact on the Al particles on the burning surface and promotes interaction between Al particles. Finally, NEPE propellants create a clear skeleton layer on the burning surface that helps Al particles stay on the burning surface. A microscopic multi-flame combustion model was created to describe the makeup of the flame of NEPE propellants. It includes the AP unit flame, the CL-20-AP flame, the Al combustion flame, and the diffusion flame of the products of decomposition of each component. In this study, the existence of molten layer and skeleton layer on the burning surface of NEPE propellants was observed for the first time in experiments. It contributes to the understanding of the unique agglomeration behavior of aluminum particles of NEPE propellants and provides theoretical guidance for the directional regulation of aluminum particle agglomeration characteristics.

Combustion of Composite Propargyl-Terminated Copolyether Propellant Containing Ammonium Dinitramide

Combustion of ammonium dinitramide based solid propellant with PBT as energetic binders

Burning Characteristics in a Wide Range of Pressure and Thermal Decomposition of AP/PBT Solid Propellants

Precise Regulation of Combustion Characteristics of High-Energy Composite Propellants by Incorporation of CL-20 Crystals Intercalated with Energetic Burn Rate Modifiers

Comparative study on detonation parameters of ammonium dinitramide and ammonium perchlorate in composite explosives

Effect of the microporous structure of ammonium perchlorate on thermal behaviour and combustion characteristics

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Effect of amine-based burning rate suppressants on the HTPB propellants: Thermal decomposition and combustion characteristics

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Evolution of structural damage of solid composite propellants under slow heating and effect on combustion characteristics

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Experimental Investigation on the Evaporation and Combustion Processes of Ammonium-Dinitramide-Based Liquid Propellant

Thermal decomposition reaction mechanism and combustion performance of AlH3/AP energetic composite

Aluminum Agglomeration of AP/HTPB Composite Propellant

Decomposition mechanism and kinetic investigation of novel urea burning rate suppressants in AP/HTPE propellants

Superoxide dismutase activity in the nervous system

Assessment of the Sensitivity to Detonation of the Gaseous Pyrolytic Products Formed During the Thermal Decomposition of Ammonium Dinitramide and Its Related Ionic Liquids

Effects of Different Initial Conditions on Combustion Process of Ammonium Dinitramide-Based Energetic Propellant in Straight Nozzle

An SEM and EDS Study of the Microstructure of Nitrate Ester Plasticized Polyether Propellants

Insight into thermal decomposition behavior of ammonium dinitramide‐based liquid propellant through reactive molecular dynamics simulations

Aluminum Particle Agglomeration Mechanism and Microscopic Combustion Characteristics of NEPE Propellants