Abstract:Both cyclic and noncyclic scrubbing experiments were conducted to remove NO from simulated flue gas in a lab scale countercurrent spraying reactor. The effects of various operating parameters (initial solution pH, NaClO concentration, absorbent temperature, and inlet NO and SO2 concentrations) on NO removal efficiencies were investigated in the noncyclic scrubbing mode. The results showed that NO removal efficiency increased greatly with the decrease of the initial pH value. However, there was a drop in NO removal efficiency, possibly due to the NO2 absorption in the gas phase. NO removal efficiency increased gradually with the increase of the NaClO concentration. Complete removal of NO was achieved when the NaClO concentration was 24 X 10(-3) mol.L-1. However, the NO removal efficiency obviously decreased with the absorbent temperature increasing from 303 to 343 K. This could be mainly ascribed to the decrease of the water solubility of NO2 and the absorption reaction of NO2 with water vapor. Furthermore, NO removal efficiency increased quickly with the increase of the inlet NO concentration. The coexisting SO2 in the simulated flue gas had little effect on the NO removal efficiency. Both NO and SO2 could be removed simultaneously with a SO2 removal efficiency of 100% and a NO removal efficiency of >93%. More importantly, the results of cyclic scrubbing experiments indicated that an average NO removal efficiency of 74% had been obtained for the whole cyclic scrubbing duration. The utilization of NaClO oxidant was calculated to be approximately 83%. The ion chromatographic analysis showed that there was no ON2- in the spent liquor. The results demonstrate that NaClO is a low-cost high-efficiency oxidant for NO removal from exhaust gas and that it has great potential for industrial applications.

NO Removal from Simulated Diesel Engine Exhaust Gas by Cyclic Scrubbing Using NaClO2 Solution in a Rotating Packed Bed Reactor

New Experimental Results of NO Removal from Simulated Flue Gas by Wet Scrubbing Using NaClO Solution

Simultaneous Removal of NO and SO2 from Exhaust Gas by Cyclic Scrubbing and Online Supplementing Ph-Buffered NaClO2 Solution

Nox Removal from Simulated Marine Exhaust Gas by Wet Scrubbing Using Naclo Solution

Nox removal from gas mixture intensified by rotating packed bed with NaClO2 preoxidation

Removal of NO from Flue Gas by Wet Scrubbing with NaClO2/(NH2)2CO Solutions

Removal of NO and SO_2 from Flue Gas by Wet Scrubbing Using Aqueous NaClO Solution

Wet Oxidation and Absorption Procedure for NOx Removal

NO Removal from Simulated Marine Diesel Engine Exhaust Gas Based on Electrolysis Method

Nitrogen Oxide Removal from Simulated Flue Gas by UV-Irradiated Sodium Chlorite Solution in a Bench-Scale Scrubbing Reactor

NO Removal from Simulated Flue Gas by UV-irradiated Sodium Hypochlorite Solution

Enhancing NOx removal in a high-gravity rotating packed bed with gaseous ClO2 oxidation-absorption: Kinetic, mass transfer, and cost analysis

Removal of NOx from Flue Gas with Radical Oxidation Combined with Chemical Scrubber.

Removal of NOx with Selective Catalytic Reduction Based on Nonthermal Plasma Preoxidation

Kinetics of Nitric Oxide Absorption from Flue Gas Using an Advanced Oxidation Process with Sodium Persulfate Solution

Uv-Enhanced Naclo Oxidation of Nitric Oxide from Simulated Flue Gas

Investigation of NO Removal with Ozone Deep Oxidation in Na2CO3 Solution

Effect of Ultraviolet Irradiation on NO Conversions by Wet Scrubbing Using NaClO2 solution

Study on the Enhancement NOx Removal from Simulated Flue Gas by NaClO2 Solution

Removal of NOx and SO2 from Simulated Ship Emissions Using Wet Scrubbing Based on Seawater Electrolysis Technology

An Investigation on NO Removal by Wet Scrubbing Using NaClO2 Seawater Solution