Abstract:The quasi-Z-source inverter (qZSI) has been widely explored for renewable energy applications due to its superiority, e.g., higher boosting ratio and operational reliability, which is attained by inserting shoot-through (ST) states. As a conventional space vector modulation (SVM) method for the three-phase qZSI, the ZSVM6 method is easy to implement by dividing the ST time into six identical intervals. However, the instantaneous inductor current ripples of the qZSI with the ZSVM6 strategy are affected by the operating conditions, e.g., modulation index m and ST duty ratio dsh. In this article, the instantaneous inductor current ripples and the maximum current ripple in the qZSI with the ZSVM6 strategy under all operational conditions are explored in detail. The operational conditions are categorized into several cases according to the relationship among the duty ratios of the active states, null states, and ST states. More importantly, an improved ZSVM6 strategy is proposed to reduce the inductor current ripple for the qZSI, in which the maximum inductor current ripple is limited by making full use of the operational states. The proposed ZSVM6 strategy keeps the total ST time in a switching cycle while maintaining the axis-symmetry feature of the inductor current, but reduces the current ripple. Simulations and experimental results confirm effectiveness of the proposal when compared with the conventional ZSVM6 strategy for ripple current reduction.

Enhanced-Boost Bidirectional Quasi-Z-Source Inverter with Novel Active Switched Inductor Cells

An Embedded Enhanced-Boost Z-Source Inverter

A Switched Quasi-Z-Source Inverter with Continuous Input Currents

A Novel Symmetrical Boost Modulation Method for qZS-based CHB Inverters

Inductor Current Ripple Analysis and Reduction for Quasi-Z-Source Inverters With an Improved ZSVM6 Strategy

A ZVS Grid-Connected Full-Bridge Inverter with a Novel ZVS SPWM Scheme

An Embedded Switched-Capacitor Z-Source Inverter with Continuous Input Currents

Enhanced-Boost Quasi-Z-Source Inverters With Two-Switched Impedance Networks

A Zero-Voltage Switching Three-Phase Inverter

A ZVS Buck/Boost Converter With Coupled-Filter-Inductor

Small-Signal Modeling And Experimental Validation Of The Three-Phase Quasi-Z-Source Inverter

Current-fed Quasi-Z-source Inverter with Voltage Buck-Boost and Regeneration Capability

High-Gain Quasi-Switched Boost Inverter with Single Inductor and Continuous Input Current

Soft-switching Z-source inverters with coupled inductor

Current-fed quasi-Z-source inverter with coupled inductors

Modeling And Control Of Single-Phase Quasi-Z-Source Inverters

ESL-𝚪-Z- Source Inverter

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

Active-Switched Coupled-Inductor Impedance Network Boost Inverters

A Comparison Analysis of a New Switched-Inductor and Conventional Split Source Inverter Structures

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy