104 FS Mode-Locked Fiber Laser with a MXENE-Based Saturable Absorber

Q. Wu,M. Zhang,X. Jin,S. Chen,Q. Jiang,X. Jiang,Z. Zheng,H. Zhang

DOI: https://doi.org/10.1364/cleo_at.2019.jw2a.86

2019-01-01

Abstract:We report an all-fiber erbium-doped laser mode-locked by a microfiber-based MXene saturable absorber, generating 104-fs pulses with 42.5-nm spectral width. Our work adds MXene to the growing catalogue of nanomaterials for future nonlinear photonics.

What problem does this paper attempt to address?

MXene-based Saturable Absorber for Femtosecond Mode-Locked Fiber Lasers

Q. Wu,X. Jin,S. Chen,X. Jiang,Y. Hu,Q. Jiang,L. Wu,J. Li,Z. Zheng,M. Zhang,H. Zhang

DOI: https://doi.org/10.1364/oe.27.010159

IF: 3.8

2019-01-01

Optics Express

Abstract:We report simple and compact all-fiber erbium-doped soliton and dispersion-managed soliton femtosecond lasers mode-locked by the MXene Ti3C2Tx. A saturable absorber device fabricated by optical deposition of Ti3C2Tx onto a microfiber exhibits strong saturable absorption properties, with a modulation depth of 11.3%. The oscillator operating in the soliton regime produces 597.8 fs-pulses with 5.21 nm of bandwidth, while the cavity with weak normal dispersion (~0.008 ps2) delivers 104 fs pulses with 42.5 nm of bandwidth. Our results contribute to the growing body of work studying the nonlinear optical properties of MXene that underpin new opportunities for ultrafast photonic technology.
Er- And Tm-Doped Mode-Locked Fiber Laser With A Broadband, Microfiber-Based Mof Saturable Absorber

Q. Zhang,M. Zhang,X. Jin,Q. Jiang,X. Jiang,H. Zhang,Z. Zheng

DOI: https://doi.org/10.1364/cleo_si.2019.sf3o.2

2019-01-01

Abstract:We demonstrate mode-locked pulse generation in erbium-doped and thulium-doped fiber lasers by using a microfiber-based metal-organic frameworks saturable absorber. Our results highlight the applicability of such nanomaterial as a broadband SA for ultrafast photonic applications. (c) 2019 The Author(s)
Thulium-doped Mode-Locked Fiber Laser with MXene Saturable Absorber

Q. Jiang,M. Zhang,Q. Zhang,X. Jin,Q. Wu,X. Jiang,H. Zhang,Z. Zheng

DOI: https://doi.org/10.1364/cleo_si.2019.sf3o.3

2019-01-01

Abstract:We demonstrate an all-fiber thulium-doped mode-locked laser by using MXene as the saturable absorber, producing 2.11 ps pulses at 13.45 MHz repetition rate. Our work highlights the potential of MXene-based devices for future photonic technologies.© 2019 The Author(s)
MXene Saturable Absorbers in Mode‐Locked Fiber Laser

Kuen Yao Lau,Xiaofeng Liu,Jianrong Qiu

DOI: https://doi.org/10.1002/lpor.202100709

2022-07-19

Abstract:MXene comprises one of the largest families in two dimensional nanomaterials with various chemical compositions, atomic structures, and terminated group species. There are over 200 types of MXenes that can be incorporated as optical switches owing to its excellent nonlinear saturable absorption characteristic. This review provides a deep insight into MXene based saturable absorber for mode‐locked fiber laser at all wavelengths. Being a new class of two dimensional (2D) metal carbides, borides, and nitrides, MXenes comprise one of the largest families of 2D nanomaterials that provide huge possibilities in photonics, electronics, and energy, Particularly, MXenes are discovered recently as alternatives to conventional saturable absorbers (SAs), such as carbon nanotube and graphene, which are used for short laser pulse generation. The high saturable absorption, astounding modulation depth, flexible bandgap tunability, and high electron density near Fermi level are the main features that make MXenes excellent candidate materials for SAs. Herein, this review summarizes the recent development on synthesis and characterization of the MXene, with focus on the nonlinear saturable absorption and the application of the MXene SA in mode‐locked fiber lasers. The emerging issues and challenges associated with MXene based SAs, as well as future perspectives of the reviewed topic are also discussed.

physics, condensed matter,optics, applied
Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Lizhen Wang,Peizhen Xu,Yuhang Li,Jize Han,Xin Guo,Yudong Cui,Xueming Liu,Limin Tong

DOI: https://doi.org/10.1038/s41598-018-23027-9

IF: 4.6

2018-01-01

Scientific Reports

Abstract:Mode-locked Yb-doped fiber lasers around 1 μm are attractive for high power applications and low noise pulse train generation. Mode-locked fiber lasers working in soliton and stretched-pulse regime outperform others in terms of the laser noise characteristics, mechanical stability and easy maintenance. However, conventional optical fibers always show a normal group velocity dispersion around 1 μm, leading to the inconvenience for necessary dispersion management. Here we show that optical microfibers having a large anomalous dispersion around 1 μm can be integrated into mode-locked Yb-doped fiber lasers with ultralow insertion loss down to −0.06 dB, enabling convenient dispersion management of the laser cavity. Besides, optical microfibers could also be adopted to spectrally broaden and to dechirp the ultrashort pulses outside the laser cavity, giving rise to a pulse duration of about 110 fs. We believe that this demonstration may facilitate all-fiber format high-performance ultrashort pulse generation at 1 μm and may find applications in precision measurements, large-scale facility synchronization and evanescent-field-based optical sensing.
Mode-locked thulium-doped fiber laser using a stretched few-mode fiber as a saturable absorber

Xiuqi Wang,Mengping Zhong,Huanhuan Li,Kunyang Wang,Can Li,Junjie Zhang,Shiqing Xu

DOI: https://doi.org/10.1088/1555-6611/ad21f0

IF: 1.2

2024-02-16

Laser Physics

Abstract:In this work, an all-fiber saturable absorber (SA) based on nonlinear multimode interference in a short few-mode fiber (FMF) was proposed. Saturable absorption in this all-fiber device was demonstrated with an absorption modulation depth and a saturation fluence of 14.3% and 55.6 μJ cm −2 , respectively. A stable mode-locking operation was observed in a thulium-doped passively mode-locked fiber laser using the FMF-based FMF SA. Ultrafast pulses were generated at 1911 nm with a pulse width of 1.96 ps and a 15.69 MHz repetition rate, respectively. The output average power was 2.8 mW, corresponding to a pulse energy of 178 pJ, which was significantly improved compared to graded-index multimode fiber-based SA. The experimental results demonstrate that FMF SA has great potential in eye-safe ultrafast photonics.

optics,physics, applied
Yb-doped all fiber picosecond laser based on grade-index multimode fiber with microcavity

Zhipeng Dong,Shujie Li,Ruishan Chen,Hongxun Li,Chun Gu,Peijun Yao,Lixin Xu

DOI: https://doi.org/10.48550/arXiv.1809.07174

2018-09-13

Instrumentation and Detectors

Abstract:We demonstrate an all-fiber mode-locked laser at all-normal dispersion with a saturable absorber, which is based on a section of grade-index multimode fiber with inner microcavity embedded in the splice points. The absorption modulation depth of this nonlinear saturable absorber is 2.2% in the suitable bent state. The fiber laser operates at central wavelength of 1035nm with average power of ~1.26mW, pulse-duration of 17.05 ps, repetition rate of 37.098MHz. This kind of saturable absorber has superiorities of low cost, high stability and high damage threshold, which may facilitate applications in optical sensing, material processing and light detection.
Mode-locked fiber laser based on Cr2Si2Te6 saturable absorber with a Sagnac loop

Yongming Yang,Haoyuan Li,Qiongyu Hu,Haoxu Zhao,Bin Zhang,Jing Liu,Xiaohan Chen,Huanian Zhang,Ping Li

DOI: https://doi.org/10.1007/s12596-023-01103-2

2023-02-24

Journal of Optics (India)

Abstract:A late-model all-fiber mode-locked laser was introduced in this paper. This pulsed Er-doped fiber laser has a novel Sagnac loop structure and uses the tapered fiber coated with two-dimensional layer ferromagnetic insulator Cr 2 Si 2 Te 6 as a saturable absorber in order to achieve passive mode locking. When the pump power was 167.6 mW, the laser worked at the fundamental repetition frequency of 19.1 MHz with a signal-to-noise ratio of 62.5 dB. The central wavelength of the spectrum was 1561.0 nm, and the maximum output power was 8.9 mW with a minimum pulse width of 5.2 ps. The mutual interference of beams makes the use of the saturable absorber more efficient. The results reveal that this Er-doped fiber laser has great application potential in nonlinear optics and ultrafast photonics.
A 147 Fs Mode-Locked Erbium-Doped Fiber Laser with a Carbon Nanotubes Saturable Absorber in Evanescent Field

Xiuzhen Dong,Zhenhua Yu,Jinrong Tian,Yanlin Li,Zhiyuan Dou,Hu Meng-Ting,Song Yan-Rong

DOI: https://doi.org/10.7498/aps.63.034202

2014-01-01

Abstract:A saturable absorber of 3.9% modulation depth was prepared on the surface of a fiber clad with single-walled carbon nanotubes (SWCNT) using chemical corrosion method. An all-fiber Er-doped fiber laser was setup with a ring cavity, and was mode-locked successfully by evanescent field mode-locking using prepared saturable absorber of single-walled carbon nanotubes. A 147 fs mode-locking pulse is obtained near 1556 nm with a 3 dB bandwidth of 24 nm. The output power is 21 mW at a pump power of 520 mW, corresponding to a pulse energy of 0.14 nJ with a repetition rate of 150 MHz.
All-fiber mode-locked laser via short single-wall carbon nanotubes interacting with evanescent wave in photonic crystal fiber.

Yujia Li,Lei Gao,Wei Huang,Cong Gao,Min Liu,Tao Zhu

DOI: https://doi.org/10.1364/OE.24.023450

IF: 3.8

2016-01-01

Optics Express

Abstract:We report an all-fiber passively mode-locked laser based on a saturable absorber fabricated by filling short single-wall carbon nanotubes into cladding holes of grapefruit-type photonic crystal fiber. The single-wall carbon nanotube is insensitive to polarization of light for its one-dimensional structure, which suppresses the polarization dependence loss. Carbon nanotubes interact with photonic crystal fiber with ultra-weak evanescent field, which enhances the damage threshold of the saturable absorber and improves the operating stability. In our experiment, conventional soliton with a pulse duration of 1.003 ps and center wavelength of 1566.36 nm under a pump power of 240 mW is generated in a compact erbium-doped fiber laser cavity with net anomalous dispersion of -0.4102 ps(2). The signal to noise ratio of the fundamental frequency component is similar to 80 dB. The maximum average output power of the mode-locked laser reaches 9.56 mW under a pump power of 360 mW. The output power can be further improved by a higher pump power. (C) 2016 Optical Society of America
Saturable Absorber Based On A Single Mode Fiber - Graded Index Fiber - Single Mode Fiber Structure With Inner Micro-Cavity

Fan Yang,D. N. Wang,Zhaokun Wang,Liujiang Li,Chun-Liu Zhao,Ben Xu,Shangzhong Jin,Shi-Ying Cao,Zhan-Jun Fang

DOI: https://doi.org/10.1364/OE.26.000927

IF: 3.8

2018-01-01

Optics Express

Abstract:An Er-doped mode-locked fiber laser with a saturable absorber based on single mode - graded index multimode - single mode fiber (SMF-GIMF-SMF) with inner microcavity is demonstrated. The modulation depth of the saturable absorber was measured to be 1.9% when the SMF-GIMF-SMF structure is bent to a certain state. Such a simple saturable absorber enables the mode-locking operation in a ring Er-doped fiber laser and ultrafast pulses with pulse energy of 0.026 nJ and pulse width of 528 fs at the fundamental repetition rate of 14.34 MHz can be generated. In addition, the harmonic mode-locking operation can also be achieved. (c) 2018 Optical Society of America
Mode-locked Er-doped Fiber Laser Based on Nonlinear Multimode Interference

N. Li,W. Y. Zhang,J. Zhang,M. Guo,Z. X. Guo

DOI: https://doi.org/10.1088/1612-202x/ab9f40

IF: 1.704

2020-01-01

Laser Physics Letters

Abstract:We demonstrated an all fiber passively mode-locked fiber laser by using one single mode fiber-graded index multimode fiber-single mode fiber (SMF-GIMF-SMF) structure as a saturable absorber (SA) based on the nonlinear multimode interference. The proposed SA with the modulation depth of 9.58%, saturation intensity of 36.50 MW cm(-2) and nonsaturable loss of similar to 21% was inserted into an Er-doped fiber laser cavity. Then the conventional soliton laser at 1566 nm was realized at a pump threshold of 180 mW. The output pulses had a pulse duration and repetition rate of 520 fs and 33.7 MHz, respectively. And the maximum pulse energy was 256 pJ. Our results further indicated that the SMF-GIMF-SMF structure can be used as an effective SA for ultrashort pulse generation.
Recent advances of MXene saturable absorber for near-infrared mode-locked fiber laser

Kuen Yao Lau

DOI: https://doi.org/10.48550/arXiv.2109.13011

2021-09-27

Optics

Abstract:To date, MXene has been discovered for its viability as alternatives to conventional saturable absorber such as carbon nanotube and graphene. The characteristics of high nonlinear saturable absorption, astounding modulation depth, flexible bandgap tunability, and high electron density near Fermi level are the fundamentals of the MXene as an excellent saturable absorber candidate. In particular, the research effort contributed to MXene in nonlinear ul-trafast optics are extensively growing because MXene comprises one of the largest families in 2D nanomaterials that provides huge combination possibilities by forming a class of metal carbide or metal nitride with 2D layered structure. Herein, this review summarizes the recent development on synthesis and material characterization of the MXene, the studies on its nonlinear saturable absorption and the application of the MXene saturable absorber in near-infrared mode-locked fiber laser. Finally, some issues and challenges as well as future perspectives of this novel material are discussed.
Sub-10 ns mode-locked fiber lasers with multimode fiber saturable absorber

N. Li,M. Guo,W.Y. Zhang,Z.X. Guo,H. Li,X.W. Li,F. Yang

DOI: https://doi.org/10.1016/j.yofte.2024.103708

IF: 2.8

2024-05-01

Optical Fiber Technology

Abstract:Sub-10 ns mode-locked fiber lasers with multimode fiber saturable absorber (SA) were demonstrated. The all fiber SA has a structure of single mode fiber -graded index multimode fiber - single mode fiber (SMF-GIMF-SMF). Inserting such SA in the designed long laser cavities with normal and anomalous dispersion, the mode locking nanosecond pulses were directly produced. In an anomalous dispersion cavity, the resultant output pulses had central wavelength, pulse duration, and repetition rate of 1560 nm, 4.0 ns and 1.87 MHz. The obtained maximum single pulse energy was 6.68 nJ. In a nomalous dispersion cavity, a 5.8 ns dissipative soliton pulses were realized at the central wavelength of 1558 nm. And the maximum pulse energy was 2.2 nJ at the fundamental repetition rate of 4.6 MHz. Such sub-10 ns lasers with nanojoule energy based on an all fiber SA can be feasible seeds for fiber amplifications in many applications.

telecommunications,engineering, electrical & electronic,optics
Mode-locked Tm fiber laser using SMF-SIMF-GIMF-SMF fiber structure as a saturable absorber.

Huanhuan Li,Zhaokun Wang,Can Li,Junjie Zhang,Shiqing Xu

DOI: https://doi.org/10.1364/OE.25.026546

IF: 3.8

2017-01-01

Optics Express

Abstract:We demonstrate a mode-locked all-fiber Tm laser using a single mode-step index multimode-graded-index multimode-single mode fiber structure as a saturable absorber based on the nonlinear multimodal interference. Stable fundamentally mode-locking operation was obtained at a pump threshold of 180mW. The output soliton pulses had a center wavelength, spectral width, pulse duration, and repetition rate of 1888 nm, 3.6 nm, 1.4 ps, and 19.82 MHz, respectively. This is a simple, low-cost, stable, and convenient laser oscillator with many potential applications in eye-safe ultrafast photonics. (C) 2017 Optical Society of America
115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers

Xuanyi Liu,Renlai Zhou,Denghui Pan,Qian Li,H. Y. Fu

DOI: https://doi.org/10.1109/lpt.2020.3045566

IF: 2.6

2020-01-01

IEEE Photonics Technology Letters

Abstract:We report on a robust, erbium-doped ultrafast fiber laser mode-locked by an artificial saturable absorber (SA) based on nonlinear polarization evolution (NPE). Unlike previous NPE fiber lasers, our cavity employs all polarization-maintaining (PM) fiber so that the laser is insensitive against environmental fluctuations. By incorporating a phase shifter in the NPE artificial SA, the oscillator possesses self-starting mode-locking ability. However, it is difficult to start pulsed operation without such a phase shifter. The simple and novel fiber laser scheme utilizing above mentioned design can directly generate 0.11 nJ, 1.20 ps ultrashort pulses at a repetition rate of 115 MHz, which is the highest repetition rate in this type of fiber lasers. We believe that this fiber oscillator offers a promising source for high repetition rate applications under less stable conditions.
All-fiber mode-locked ytterbium-doped fiber laser with a saturable absorber based on nonlinear Kerr beam cleanup effect

Baofu Zhang,Shanchao Ma,Sihua Lu,Qiurun He,Jing Guo,Zhongxing Jiao,Biao Wang

DOI: https://doi.org/10.48550/arXiv.2007.12334

2020-07-24

Optics

Abstract:We theoretically and experimentally demonstrate a novel mode-locked ytterbium-doped fiber laser with a saturable absorber based on nonlinear Kerr beam cleanup effect. The saturable absorber was formed by a 2-m graded-index multimode fiber and a single-mode fiber segment served as a diaphragm. With an all-normal-dispersion-fiber configuration, the laser generated dissipative soliton pulses with pulse duration of 26.38 ps and pulse energy more than 0.25 nJ; output pulses could be compressed externally to 615.7 fs. Moreover, the self-starting mode-locking operation of this laser exhibited a high stability with a measured signal-to-noise ratio of 73.4 dB in the RF spectrum.
Mode-locked mid-IR fibre laser based on 2D nanomaterials

Gayathri Bharathan,Xiantao Jiang,Han Zhang,Feng Chen,Ziqi Li,Stuart D. Jackson,Alex Fuerbach

DOI: https://doi.org/10.1117/12.2539898

2019-01-01

Abstract:We demonstrate the first stable mode-locking from an Er3+ doped fluoride fibre laser cavity using various novel two-dimensional saturable absorber materials such as PtSe2 and MXene operating near 2.8 mu m wavelength to the best of our knowledge. The linear cavity includes a high reflective chirped fibre Bragg grating to provide wavelength stability. The observed mode-locked pulse train has a 30 MHz repetition rate and an average power of 223 mW. Our results demonstrate the feasibility of using the novel two-dimensional nanomaterials such as PtSe2 and MXene into the fibre laser cavity for the application in mid-infrared wavelength regime.
Sub-200 Fs, 344 MHz Mode-Locked Tm-doped Fiber Laser

Weiyu Lai,Hui Zhang,Zexiu Zhu,Peiguang Yan,Shuangchen Ruan,Zhipei Sun,Jinzhang Wang

DOI: https://doi.org/10.1364/ol.403855

IF: 3.6

2020-01-01

Optics Letters

Abstract:We demonstrate a compact, self-starting mode-locked thulium-doped fiber laser based on nonlinear polarization evolution (NPE), with a fundamental repetition rate of ∼344MHz and a pulse duration of ∼160fs. The generated pulses centered at ∼1975nm have a maximum output power of ∼560mW, corresponding to a pulse energy of ∼1.63nJ. To the best of our knowledge, the achieved repetition rate represents the highest value of fundamentally NPE mode-locked fiber lasers at ∼2µm, while the average output power is also higher than the previously reported 2 µm ultrafast single-mode fiber oscillators. The timing jitter in the integrated range [5 kHz, 10 MHz] and the integrated relative intensity noise in the range [10 Hz, 10 MHz] reach ∼35fs and ∼0.009%, respectively. Our high-performance laser is an ideal candidate for various applications, including mid-infrared frequency metrology and high-speed optical sampling.

104 FS Mode-Locked Fiber Laser with a MXENE-Based Saturable Absorber

MXene-based Saturable Absorber for Femtosecond Mode-Locked Fiber Lasers

Er- And Tm-Doped Mode-Locked Fiber Laser With A Broadband, Microfiber-Based Mof Saturable Absorber

Thulium-doped Mode-Locked Fiber Laser with MXene Saturable Absorber

MXene Saturable Absorbers in Mode‐Locked Fiber Laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Mode-locked thulium-doped fiber laser using a stretched few-mode fiber as a saturable absorber

Yb-doped all fiber picosecond laser based on grade-index multimode fiber with microcavity

Mode-locked fiber laser based on Cr2Si2Te6 saturable absorber with a Sagnac loop

A 147 Fs Mode-Locked Erbium-Doped Fiber Laser with a Carbon Nanotubes Saturable Absorber in Evanescent Field

All-fiber mode-locked laser via short single-wall carbon nanotubes interacting with evanescent wave in photonic crystal fiber.

Saturable Absorber Based On A Single Mode Fiber - Graded Index Fiber - Single Mode Fiber Structure With Inner Micro-Cavity

Mode-locked Er-doped Fiber Laser Based on Nonlinear Multimode Interference

Recent advances of MXene saturable absorber for near-infrared mode-locked fiber laser

Sub-10 ns mode-locked fiber lasers with multimode fiber saturable absorber

Mode-locked Tm fiber laser using SMF-SIMF-GIMF-SMF fiber structure as a saturable absorber.

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers

All-fiber mode-locked ytterbium-doped fiber laser with a saturable absorber based on nonlinear Kerr beam cleanup effect

Mode-locked mid-IR fibre laser based on 2D nanomaterials

Sub-200 Fs, 344 MHz Mode-Locked Tm-doped Fiber Laser