Effects of sodium silicate on flotation behavior of calcium-bearing minerals and its mechanism
ZHANG Ying,HU Yue-hua,WANG Yu-hua,WEN Shu-ming
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2014.09.024
2014-01-01
The Chinese Journal of Nonferrous Metals
Abstract:The flotation behavior and mechanism of sodium silicate on scheelite, fluorite and calcite were investigated by flotation tests, Zeta potential and XPS. The flotation experiment results show that the recovery of scheelite is higher than 80%, but the recoveries of fluorite and calcite are less than 10%and 26%, respectively, when Na2SiO3 dosage is greater than 2.5 g/L with collector 731 in the pH range of 9.7-10.3. The results of Zeta potential measurement show that Zeta potentials of scheelite shift negatively a little, however, the Zeta potentials of fluorite and calcite shift to more negative values in presence of sodium silicate, which indicates that sodium silicate is more easily adsorbed on the surface of fluorite and calcite. The results of XPS show that the Si 2p peaks are found on the surface of fluorite and calcite in presence of sodium silicate, and Si relative contents are 6.81%and 4.72%, respectively, but the Si relative concentration on the scheelite surface is only 0.35%, and Ca 2p 3/2 binding energy shifts of scheelite, fluorite and calcite are 0.26, 0.41 and 0.55 eV, respectively. According to the results of XPS, it can be concluded that sodium silicate is absorbed on the scheelite surface by physical adsorption, but it is absorbed on the fluorite and calcite surface by chemical adsorption. Therefore, sodium silicate can be used to separate scheelite from fluorite and calcite for selective depression fluorite and calcite.