Abstract:In this work, to simultaneously meet the requirements of good electrochemical performance and redox stability, perovskite oxide Pr0.4Sr0.6Fe0.875Mo0.125O3-δ (PSFM) material has been developed as a novel redox-stable electrode for symmetrical cell application. The experimental results obtained by X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy show that metallic Fe nanoparticles will exsolve from the parent oxide PSFM through in-situ exsolution method when treating in 97% H2–3% H2O atmosphere, and then completely re-incorporate into the parent oxide in air, demonstrating excellent redox stability for PSFM material. In addition, the redox stability in electrochemical performance is also studied by recording the electrochemical impedance spectra and distribution of relaxation times (DRT) analysis. It is demonstrated that a constant electrode polarization resistance (Rp) of ~0.60 Ωcm2 is achieved for the symmetrical cell with PSFM electrode in air at 800 °C after activation, and Rp value is significantly increased to 1.59 Ωcm2 when exposing the symmetrical cell to 97% H2–3% H2O, which is possibly ascribed to the significantly decreased electrical conductivity form 71.0 Scm−1in air to 3.8 Scm−1 in 97% H2–3% H2O. Moreover, it is shown that Rp value recorded in air is effectively decreased to ~0.33 Ωcm2, and keeps constant during the following 200-h redox stability testing, while Rp value measured in 97% H2–3% H2O atmosphere is gradually decreased to 0.82 Ωcm2, which can be explained by the enhanced electro-catalytic properties of PSFM electrode induced by the gradually exsolved Fe nanocatalysts from parent PSFM electrode. At the same time, DRT analysis demonstrates that the sub-electrode process including oxygen/hydrogen adsorption, dissociation ionization and surface diffusion to triple phase boundaries occurred at the electrode/electrolyte interfacial is the predominant rate-limiting step, which can be effectively accelerated by surface modification and exsolved Fe nanoparticles. These results indicate that PSFM is a promising symmetrical electrode material for symmetrical cell application because of its good electrochemical performance and excellent long-term redox stability.

Highly Stable and Efficient Perovskite Ferrite Electrode for Symmetrical Solid Oxide Fuel Cells

In Situ Growth of Nanoparticles in A-site Deficient Ferrite Perovskite As an Advanced Electrode for Symmetrical Solid Oxide Fuel Cells

Characterization of Sr/Ru co-doped ferrite based perovskite as a symmetrical electrode material for solid oxide fuel cells

Gadolinium-doped SrFeO 3 As a Highly Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

A-site Alkali Metal-Doped SrTi0.3Fe0.7O3-δ: A Highly Stable Symmetrical Electrode Material for Solid Oxide Electrochemical Cells

Preparation and characterization of a redox-stable Pr0.4Sr0.6Fe0.875Mo0.125O3-δ material as a novel symmetrical electrode for solid oxide cell application

A New Family of Ce-Doped Smfeo3 Perovskite for Application in Symmetrical Solid Oxide Fuel Cells

Titanium-substituted Lanthanum Strontium Ferrite As a Novel Electrode Material for Symmetrical Solid Oxide Fuel Cell

Enhanced Electrocatalytic Activity and Stability for Symmetrical Solid Oxide Fuel Cells with Praseodymium-Doped SrCo0.2Fe0.8O3-δ Electrodes

On Fe-based perovskite electrodes for symmetrical reversible solid oxide cells – A review

RuOx modified PrBaFe1.8Hf0.2O5+δ surface for boosting the performance of symmetrical solid oxide fuel cells

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Highly Active and Robust A-site Deficient La0.77Sr0.2Co0.2Fe0.8O3-δ Fiber Base Electrode for Intermediate Temperature Solid Oxide Cells

Highly efficient perovskite-based fuel electrodes for solid oxide electrochemical cells via in-situ nanoparticle exsolution and electron conduction enhancement

Sc-substituted La0.6Sr0.4FeO3−δ Mixed Conducting Oxides As Promising Electrodes for Symmetrical Solid Oxide Fuel Cells

Nano Perovskite SmFeO3 As an Electrode Material for Symmetrical Solid Oxide Fuel Cells

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Cobalt-free Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ As a Bi-Functional Electrode Material for Solid Oxide Fuel Cells

Atomic‐Scale Engineering for New Generation Air Electrode Materials of Solid Oxide Cells: Quintuple Perovskite Sm2Ba3Co2Fe3O15‐δ with Twinned Crystal Structure

An Innovative and Facile Synthesis Route of (la,sr) 2feo 4+ Δ –la 0.4sr 0.6feo 3− Δ Composite As a Highly Stable Air Electrode for Reversible Solid Oxide Cell Applications

An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells