Speeding protons with metal vacancies

Fengmei Wang,Jun He

DOI: https://doi.org/10.1126/science.abe6166

IF: 56.9

2020-10-30

Science

Abstract:Membranes made from nanosheets derived from CdPS 3 have high proton conductivity

multidisciplinary sciences

What problem does this paper attempt to address?

CdPS 3 nanosheets-based membrane with high proton conductivity enabled by Cd vacancies

Xitang Qian,Long Chen,Lichang Yin,Zhibo Liu,Songfeng Pei,Fan Li,Guangjin Hou,Shuangming Chen,Li Song,Khalid Hussain Thebo,Hui-Ming Cheng,Wencai Ren

DOI: https://doi.org/10.1126/science.abb9704

IF: 56.9

2020-10-30

Science

Abstract:Vacancies enhance proton conductivity Proton-exchange membranes (PEMs) allow for the transport of protons while acting as electrical insulators and ensuring that reactants are kept apart; therefore, they are a key component in devices such as low-temperature fuel cells. PEMs are typically made from polymers or materials embedded in a polymer matrix and need to operate in conditions of very high humidity. Starting with an inorganic, layered material, CdPS 3 , Qian et al. show that the removal of a small amount of cadmium introduces vacancies that greatly increase the proton conductivity of the PEMs (see the Perspective by Wang and He). The process works for manganese-based membranes as well, and high lithium ion transport was also observed. Science , this issue p. 596 ; see also p. 525

multidisciplinary sciences
CdPS3 Nanosheets-Based Membrane with High Proton Conductivity Enabled by Cd Vacancies.

Xitang Qian,Long Chen,Lichang Yin,Zhibo Liu,Songfeng Pei,Fan Li,Guangjin Hou,Shuangming Chen,Li Song,Khalid Hussain Thebo,Hui-Ming Cheng,Wencai Ren

DOI: https://doi.org/10.1126/science.abb9704

IF: 56.9

2020-01-01

Science

Abstract:Proton transport in nanochannels under humid conditions is crucial for the application in energy storage and conversion. However, existing materials, including Nafion, suffer from limited conductivity of up to 0.2 siemens per centimeter. We report a class of membranes assembled with two-dimensional transition-metal phosphorus trichalcogenide nanosheets, in which the transition-metal vacancies enable exceptionally high ion conductivity. A Cd0.85PS3Li0.15H0.15 membrane exhibits a proton conduction dominant conductivity of ~0.95 siemens per centimeter at 90° Celsius and 98% relative humidity. This performance mainly originates from the abundant proton donor centers, easy proton desorption, and excellent hydration of the membranes induced by cadmium vacancies. We also observed superhigh lithium ion conductivity in Cd0.85PS3Li0.3 and Mn0.77PS3Li0.46 membranes.
Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Guoliang Liu,Wen-Chin Tsen,Fuqiang Hu,Fei Zhong,Jie Wang,Hai Liu,Sheng Wen,Genwen Zheng,Caiqin Qin,Chunli Gong

DOI: https://doi.org/10.1016/j.ijhydene.2020.07.157

IF: 7.2

2020-01-01

International Journal of Hydrogen Energy

Abstract:To increase proton conductivity of chitosan (CS) based polymer electrolyte membranes, a novel nanofiller-solid superacide SO42--TiO2 (STi) coated carbon nanotubes (STi@CNTs) are introduced into CS matrix to fabricate membranes for polymer electrolyte membrane fuel cells (PEMFCs). Owing to the STi coating, the dispersion ability of CNTs and interfacial bonding are obviously improved, hence, CNTs can more fully play their reinforcing role, which makes the CS/STi@CNTs composite membranes exhibit better mechanical properties than that of pure CS membrane. More importantly, STi possesses excellent proton transport ability and may create facile proton transport channels in the membranes with the help of high aspect ratio of CNTs. Particularly, the CS/STi@CNTs-1 membrane (1 wt% STi@CNTs loading) obtains the highest proton conductivity of 4.2 x 10(-2) S cm(-1) at 80 degrees C, enhancing by 80% when compared with that of pure CS membrane. In addition, the STi@CNTs also confer the composite membranes low methanol crossover and outstanding cell performance. The maximum power density of the CS/STi@CNTs-1 membrane is 60.7 mW cm(-2) (5 M methanol concentration, 70 degrees C), while pure CS membrane produces the peak power density of only 39.8 mW cm(-2). (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

Jie Wang,Ting Qu,Jing Ni,Fan Cheng,Fuqiang Hu,Ying Ou,Chunli Gong,Sheng Wen,Xiaobo Chen,Hai Liu

DOI: https://doi.org/10.1016/j.surfin.2022.102557

IF: 6.2

2023-01-01

Surfaces and Interfaces

Abstract:Super inorganic proton conductor boron phosphate (BPO4) was utilized to functionalize the multi-walled carbon nanotubes (MWNTs) through a convenient sol-gel method with the assist of polydopamine (PDA) to yield BPO4 coated MWNTs (BPO4@MWNTs). Then the BPO4@MWNTs was dispersed in dilute chitosan (CTS) solution to fabricate CTS/BPO4@MWNTs composite membrane. The CTS/BPO4@MWNTs composite membranes showed superior performances in thermal stability, mechanical property and oxidation stability due to the well-dispersed BPO4@MWNTs in CTS matrix and the optimized interface compatibility between the BPO4@MWNTs and the CTS matrix. Moreover, BPO4 coated on the surface of MWNTs can provide an extra proton conducting pathway render the CTS/BPO4@MWNTs-2 composite membrane showed the proton conductivity of 0.040 S cm-1 at 80 C and the maximum power density of 49.0 mW cm(-2) at 70 C and 2 M methanol concentration much higher than that for original CTS membranes.
The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Silong Wu,Xiaohong Feng,Fei Zhong,Bingqing Zhang,Jie Wang,Ting Qu,Jing Ni,Hai Liu,Chunli Gong,Fuqiang Hu

DOI: https://doi.org/10.1002/mame.202100519

2021-01-01

Macromolecular Materials and Engineering

Abstract:In this study, the carbon nanotubes (CNTs) are successively coated via sol-gel method with SiO2 (SiO2@CNTs), followed by grafting with 3-merraptnpropyltrimethnxysilane and oxidation with hydrogen peroxide to yield dual-modified CNTs (SSiO2@CNTs). The SSiO2@CNTs material is applied to prepared chitosan (CS) based composite proton exchange membranes by the incorporation of various content of SSiO2@CNTs, the structure and properties of as-prepared composite membranes are fully investigated. Compared to pristine CS membrane, the SSiO2@CNTs-filled composite membranes show improved thermal stability, mechanical stability, and methanol resistance, owing to the effective interface interaction and good compatibility between SSiO2@CNTs and CS matrix. Additionally, the doping of SSiO2@CNTs also generates a positive effect on the electrochemistry performance, due to the construction of abundant transport channel and providing more proton sources or proton sites. Particularly, the CS/SSiO2@CNTs-7 membrane exhibits tensile strength of about 40.1 MPa and proton conductivity of 35.8 mS cm(-1) at 80 degrees C, which is almost 1.6 and 2.0 times higher than pure CS membrane, and lower methanol permeability of 0.9 x 10(-6) cm(2) s(-1). The direct methanol fuel cell performance (DMFC) of CS/SSiO2@CNTs-7 membrane is also improved with open circuit voltage of 0.67 V and maximum power density of 60.7 mW cm(-2) at 70 degrees C.
Subnanometer Nanowire‐Reinforced Construction of COF‐Based Membranes with Engineering Biomimetic Texture for Efficient and Stable Proton Conduction

Liyu Zhu,Limei Zhang,Yuting Ren,Jiandu Lei,Luying Wang,Jing Liu

DOI: https://doi.org/10.1002/adfm.202313844

IF: 19

2023-12-24

Advanced Functional Materials

Abstract:A biomimetic adhesive strategy is proposed in combination with topological interlocking and alternating laminated architecture to overcome the trade‐off effect between proton conductivity and mechanical stability of COF membranes. A polyoxometalate (H3PW12O40, HPW)‐centred subnanowire (SNW) is developed for synergistically enhancing the binding capacity between TP‐COF nanosheets and strengthening the proton conductivity. Achieving rapid ion transport through nanochannels is essential for both biological and artificial membrane systems. Covalent organic frameworks (COFs) with well‐defined nanostructures hold great promise for addressing the above challenge. However, due to the limited processability and inadequate interlamellar interaction of COF materials, it is extremely difficult to integrate them to prepare high‐performance proton conductors. Herein, inspired by the ingenious bio‐adhesion strategy in nature, ultrafast proton conduction is achieved by taking advantage of COF membranes where TP‐COF nanosheets are linked by subnanometer nanowires/lignocellulosic nanofibrils composites (SNWs/LCNFs) through electrostatic and π‐π interactions to form an ordered and robust structure. Notably, the synthesized SNWs exhibited impressive proton conductivity and adhesion capacity due to their inbuilt phosphotungstic acid (HPW) molecules and multidimensional interactions. Therefore, attributed to the synergistic contribution of TP‐COFs and SNWs, the composite membrane achieves ultrahigh proton conductivity (0.395 S cm−1 at 80 °C and 100% RH), superior mechanical property (109.8 MPa), exceptional fuel cell performance (71.6 mW cm−2), and superior operational stability (OCV decay rate is about 1.5 mV h−1), demonstrating outstanding competitiveness. More importantly, the proposed design concept has the potential to be applied in membranes for various electrochemical devices and molecular separations.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Effectively Facilitating the Proton Conduction of Proton Exchange Membrane by Polydopamine Modified Hollow Metal−organic Framework

Zhuang Rao,Minqiu Lan,Zhengyun Wang,Huihai Wan,Guangfang Li,Jiannan Zhu,Beibei Tang,Hongfang Liu

DOI: https://doi.org/10.1016/j.memsci.2021.120098

IF: 9.5

2021-01-01

Journal of Membrane Science

Abstract:An effective proton conduction accelerator, polydopamine (PDA) modified hollow metal-organic framework (DHZIF-8), was designed and constructed. Composite proton exchange membrane (PEM) with excellent proton conductivities was obtained by incorporation of DHZIF-8 into Nafion matrix. The hydrophilic groups on surface and hollow structure of DHZIF-8 endowed the composite PEM with higher water retention capacity, which was especially conducive to fast transportation of protons. Moreover, the proton conducting hindrance throughout DHZIF-8 was sufficiently alleviated by the hollow structure. Besides, the constituted acid-base pairs between -SO3H of Nafion and -NH2/-NH- of DHZIF-8 could work as effective proton transfer pathways. These greatly facilitated the proton conduction of the composite PEM. Its proton conductivities boosted up to 0.255 S/cm under 80 ?, 95% RH, and 3.66 mS/cm under 120 ?, anhydrous condition, which were approximately 1.5 and 2.2 times greater than those of Nafion control-membrane (0.104 S/cm and 1.14 mS/cm), respectively. Additionally, the maximum power density of the composite PEM reached up to 270.8 mW/cm(2), which was about 58% higher than that of Nafion control-membrane (171.5 mW/cm(2)). This study provides a referable strategy for designing and constructing functionalized MOFs with specific structures to effectively facilitate the proton conduction of PEMs.
Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Jinyu Fu,Jing Ni,Jie Wang,Ting Qu,Fuqiang Hu,Hai Liu,Quanyuan Zhang,Zushun Xu,Chunli Gong,Sheng Wen

DOI: https://doi.org/10.1016/j.jmrt.2022.12.118

2023-01-01

Abstract:The preparation of composite proton exchange membranes (PEMs) by incorporating metal- organic frameworks (MOFs) into polymeric substrates has become a hot research topic in the field of fuel cells in recent years. In this work, ZSC was prepared by in-suit reacted with the precursor of ZIF-8 (Zeolitic Imidazolate Framework 8) and silica coated carbon nanotubes (SiO2@CNTs). The as-prepared ZSC was introduced into sulfonated poly (ether ether ketone) (SPEEK) to fabricate a series of composite proton exchange membranes SPEEK/ZSC-x (where x is the mass percentage between ZSC and SPEEK). The coating treatment of carbon nanotubes (CNTs) by silica not only can avoid the direct contacting among CNTs and enhance the dispersion in SPEEK matrix, but also realize the regulation of nucleation and crystallization process of ZIF-8 particles along the morphology of CNTs. The obtained SPEEK/ZSC composite membranes show improved performance owing to construction of interconnected network architecture and the compositional advantages of the ZSC materials. The proton conductivity of SPEEK/ZSC-0.5 membrane was up to 38.10 mS/cm at 80 °C, which was 1.8 times that of the pure SPEEK membrane (21.12 mS/cm) under the same condition. Moreover, the SPEEK/ZSC-0.5 showed better performance with peak power density of 38.9 mW/cm2 in 2 M methanol solution, which was 1.3 times that of the pure SPEEK membrane of 30.3 mW/cm2, the further stability tests confirmed that the composite film maintained good voltage stability even after 100 h of continuous operation at 80 °C. These results indicate that the strategy of construction MOFs and functional CNTs hybrid materials show promising application prospects in the preparation of high performance PEMs.
Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Jiale Chu,Ying Ou,Fan Cheng,Hai Liu,Nan Luo,Fuqiang Hu,Sheng Wen,Chunli Gong

DOI: https://doi.org/10.1016/j.ijhydene.2023.10.298

IF: 7.2

2024-01-01

International Journal of Hydrogen Energy

Abstract:In this work, the polyvinylidene fluoride (PVDF) electrospun fibers was applied as robust mechanical support and subsequently functionalized with polydopamine/polyethyleneimine (PDA/PEI) composite, then filled with sulfonated poly (ether ether ketone) (SPEEK) to obtain SPEEK-PDA/PEI@PVDF composite proton exchange membranes. The composite membranes achieved better balance on the mechanical stability and conduction performance, owing to enhanced interface interactions and compatibility between robust PVDF and conductive SPEEK. In wet conditions, the composite membrane exhibited excellent mechanically robust with tensile strength of 34 MPa and elongation at break of almost 200 %. Furthermore, the composite membranes also showed high structure and performance stability during the measurement of proton conductivity and fuel cell performances, it could hold stable proton conductivity of 48 mScm(-1) (at 80 degrees C) and maximum power density of 58.9 mWcm(-2). The durability test further confirmed the super operating stability of composite membrane, only 2.6 % reduction in open circuit voltage was observed during operated at 80 degrees C for 100 h.y
Enhancing proton conduction of high temperature proton exchange membranes based on carbon dots doped polyvinyl chloride nanofibers

Ke Liu,Xiaoqing Wei,Shu Hu,Qingquan Li,Weimin Gao,Dan Wu,Quantong Che

DOI: https://doi.org/10.1016/j.seppur.2023.124679

IF: 8.6

2023-08-09

Separation and Purification Technology

Abstract:Carbon dots (CDs) as the easy-to-get and cheap carbon nanomaterials exhibited the great potential in various high-performance electrolytes. In this research, we constructed high temperature proton exchange membranes with multilayered microstructures through a couple of polyvinyl chloride (PVC) nanofibers layers wrapping a thin CDs layer. In the prepared (PVC/CDs/PVC) es membrane, the CDs provided a mount of sites to anchor phosphoric acid (PA) molecules with the formation of the (PVC/CDs/PVC) es /PA membrane. The proton conduction was accelerated by the continuous proton conduction channels consisting of the CDs layer and PA molecular chains. Notably, the proton conduction behavior was guided by the PVC nanofibers in the (PVC/CDs/PVC) es /PA membrane. Furthermore, a large number of hydrophilic oxygenated functional groups surrounding CDs facilitated the proton conduction process owing to the reduced proton conduction resistance in the hydrophilic membrane. For the PVC/ImCDs/PA membrane, the imidazolium groups could enhance proton conductivity. From our perspective, the imidazolium groups grafted CDs (ImCDs) participated into the proton conduction process through providing imidazolium groups for ameliorating proton conduction network. The enhanced proton conduction was achieved through constructing multilayered structure. Specifically, the (PVC/CDs/PVC) es /PA membrane exhibited the proton conductivity of 5.61 × 10 -3 S/cm at 150 °C, which was higher than 7.73 × 10 -4 S/cm of the PVC/CDs/PA membrane. Notably, the PA doped membrane could retain the mechanical strength without microstructure expansion.

engineering, chemical
Enhanced Proton Transfer in Proton-Exchange Membranes with Interconnected and Zwitterion-Functionalized Covalent Porous Material Structures.

Zhuang Rao,Deyu Zhu,You Xu,Minqiu Lan,Lipei Jiang,Zhengyun Wang,Beibei Tang,Hongfang Liu

DOI: https://doi.org/10.1002/cssc.202202279

IF: 8.4

2023-01-01

ChemSusChem

Abstract:Excellent proton-conductive accelerators are indispensable for efficient proton-exchange membranes (PEMs). Covalent porous materials (CPMs), with adjustable functionalities and well-ordered porosities, show much promise as effective proton-conductive accelerators. In this study, an interconnected and zwitterion-functionalized CPM structure based on carbon nanotubes and a Schiff-base network (CNT@ZSNW-1) is constructed as a highly efficient proton-conducting accelerator by in situ growth of SNW-1 onto carbon nanotubes (CNTs) and subsequent zwitterion functionalization. A composite PEM with enhanced proton conduction is acquired by integrating CNT@ZSNW-1 with Nafion. Zwitterion functionalization offers additional proton-conducting sites and promotes the water retention capacity. Moreover, the interconnected structure of CNT@ZSNW-1 induces a more consecutive arrangement of ionic clusters, which significantly relieves the proton transfer barrier of the composite PEM and increases its proton conductivity to 0.287 Scm(-1) under 95% RH at 90 degrees C (about 2.2 times that of the recast Nafion, 0.131 Scm(-1)). Furthermore, the composite PEM displays a peak power density of 39.6 mWcm(-2) in a direct methanol fuel cell, which is significantly higher than that of the recast Nafion (19.9 mWcm(-2)). This study affords a potential reference for devising and preparing functionalized CPMs with optimized structures to expedite proton transfer in PEMs.
Sheet-dot-framework membrane towards efficient proton conduction and outstanding stability

Jianlong Lin,Jingchuan Dang,Guoli Zhou,Wenjia Wu,Yarong Liu,Yafang Zhang,Jingtao Wang

DOI: https://doi.org/10.1039/d0ta03491f

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:A sheet-dot-framework membrane with cross-layer proton transfer pathways and an ordered covalent framework permits excellent proton conduction and stability.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Construction of unimpeded proton-conducting pathways in solution-processed nanoporous polymer membranes

Xiaohui Tang,Nattapol Ma,Hong Xu,Huanhuan Zhang,Qinglei Zhang,Linkun Cai,Ken-Ichi Otake,Panchao Yin,Susumu Kitagawa,Satoshi Horike,Cheng Gu

DOI: https://doi.org/10.1039/d1mh01147b

2021-11-01

Abstract:Developing proton-conducting membranes with three-dimensional conductivity and expedited interfacial contact is requested in the field of fuel cells. Here, we present a design strategy by combining solution processing and material flexibility into amorphous and porous polymers. We design a nanoporous polymer whose skeleton contains dihydrophenazine as a proton-accepting site, and subsequently protonate these sites to produce abundant charges on the polymer skeletons, which enables ionic polymers to be well dispersed in organic solvents and guarantees that they can be fabricated into uniform and amorphous membranes in a solution-processed manner. Importantly, after protonation, the dihydrophenazines change to proton-donating sites, which exhibit dynamic local motions that assist proton exchange on the polymer skeletons and thus construct three-dimensional and unimpeded proton-conduction pathways, with a striking proton conductivity of 0.30 S cm-1 (298 K and 90% relative humidity), a low resistance of 3.02 Ω, and a H+ transport number of 0.98 that was very close to the upper limitation of 1.0.
Self-assembly of metal-organic framework onto nanofibrous mats to enhance proton conductivity for proton exchange membrane

Guodong Zhao,Lei Shi,Meiling Zhang,Bowen Cheng,Guang Yang,Xupin Zhuang

DOI: https://doi.org/10.1016/j.ijhydene.2021.08.110

IF: 7.2

2021-10-01

International Journal of Hydrogen Energy

Abstract:Constructing consecutive proton-conducting nanochannels and optimizing nanophase-separation within proton exchange membrane (PEM) was of guiding significance for improving proton transfer. Metal organic framework (MOF), as a novel and functional material had drawn increasing attention in the research of proton PEM because of its flexible tunability and designability. Herein, a novel MOF-based nanofibrous mats (NFMs) were prepared by the self-assembly of zeolitic imidazole framework-67 (ZIF-67) onto polyacrylonitrile (PAN) NFMs. Subsequently, the ZIF-67 NFMs were incorporated into Nafion matrix to prepare composite membrane which aimed at constructing consecutive proton-conducting channels. Especially, the acid–base pairs between N–H (ZIF-67 NFMs) and –SO3H (Nafion) could promote the protonation/deprotonation and subsequent proton leaping via Grotthuss mechanisms. As expected, the composite membrane showed a promising proton conductivity of 288 mS/cm at 80 °C and 100% RH, low methanol permeability of 7.98 × 10−7 cm2s−1, and superior power density of 298.68 mW/cm2 at 80 °C and 100% RH. In addition, the resulting composite membrane exhibited considerable enhancement in thermal stability and dimensional stability. This promising strategy provided a valuable reference for designing high-performance PEMs.

energy & fuels,electrochemistry,chemistry, physical
Zwitterionic Nanoconfined Proton‐Sieve: Charged Casing for Accelerating Proton Conduction

Wenwu Zou,Guoxing Jiang,Baotao Li,Weifeng Zhang,Liming Wang,Zhiming Cui,Huiyu Song,Zhenxing Liang,Li Du

DOI: https://doi.org/10.1002/aenm.202402556

IF: 27.8

2024-08-20

Advanced Energy Materials

Abstract:Here, a zwitterion nanoconfined proton‐sieves (ziNPS) that employed a "cation shell‐anion channel‐cation core" structure based on zwitterionic COF to function as a proton conductor. Cation sites act as an H3O+ dissociating accelerator by repulsion is presented. Furthermore, the anion units influence the kinetics of proton migration by densifying the hydronium‐water overlapping domain and forming short hydrogen bonds. Since specifying the structure during operation tends to be challenging for intrinsically proton‐conducting polymers, it becomes increasingly essential to establish a well‐defined migration path in order to predict the proton conductivity. Zwitterion covalent organic frameworks (ziCOFs) provide a platform in crystal frameworks to investigate the proton transfer mechanism, considering their specific charged channel walls, deprotonation surface, and host–guest interactions. Here, a zwitterion nanoconfined proton‐sieves (ziNPS) with "charged casing" channel of charged pathways is proposed to demonstrate theoretically the effectiveness of proton conduction. Density functional theory and molecular dynamic simulation results show that the ziNPS with different anion groups all achieve a shorter hydrogen bond to increase the dense "hydronium‐water" domain, creating a channel of hydrogen bond networks to provide a long‐range pathway for the proton to migrate. As expected, the proton conductivity test by electrochemical impedance spectroscopy demonstrates the aforementioned concept as well. This research presents a fresh view of the ion conduction mechanism originating from localized zwitterionic units, which can apply to the fabrication of COF‐based proton conductors.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

Wei Hu,Xue Yang,Xiaowei Hou,Qi Zhao,Baijun Liu,Zhaoyan Sun,Haiming Xie,Guangshan Zhu

DOI: https://doi.org/10.1002/mame.201900388

2020-01-01

Macromolecular Materials and Engineering

Abstract:In this work, a kind of novel nanocomposite proton exchange membranes (PEMs) with excellent properties for fuel cell application is obtained through the combination of electrospinning and solution casting. PEMs are obtained via the electrospinning of solution of sulfonated poly(arylene ether ketone)s (SPAEK)s with carboxylic acid group (SPAEK-COOH) inserted with nanocrystal cellulose (NCC) first, and then, the SPAEK-COOH solution is cast on the obtained electrospinning membrane to fill the voids. According to the scanning electron microscopy image of the membrane surface and freeze-fractured cross section, the nonporous membrane was successfully obtained. The water uptake and the swelling rate of the nanocomposite membrane with 2% NCC (NF-NCC2) decrease to 62% and 61.5%, respectively, and the membrane shows much higher proton conductivity (0.29 S cm(-1)) than the pristine SPAEK-COOH membrane (NF-NCC0) (0.196 S cm(-1)) at 100 degrees C. Furthermore, NF-NCC2 shows a tensile strength of 38 MPa, which is an increase of 36% compared to NF-NCC0 (28 MPa). The orderly and uniform distribution of NCC in the electrospinning nanofiber and further in the membranes.
A Novel Route for Preparing Highly Proton Conductive Membrane Materials with Metal-Organic Frameworks

Bin Wu,Xiaocheng Lin,Liang Ge,Liang Wu,Tongwen Xu

DOI: https://doi.org/10.1039/c2cc37045j

IF: 4.9

2013-01-01

Chemical Communications

Abstract:Fe-MIL-101-NH2 was prepared by a novel method. The MOFs adhered well to SPPO via chemical bonds, and yielded the mixed-matrix Fe-MIL-101-NH2-SPPO membrane for use in fuel cells. The proton conductivity of the membranes was as high as 0.10 S cm−1 at room temperature and 0.25 S cm−1 at 90 °C.
Proton Delivery Through a Dynamic 3D H-bond Network Constructed from Dense Hydroxyls for Advanced Ion-Selective Membranes

Lei Hu,Li Gao,Xiaoming Yan,Wenji Zheng,Yan Dai,Ce Hao,Xuemei Wu,Gaohong He

DOI: https://doi.org/10.1039/c9ta04423j

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:A dynamic 3D H-bond network constructed from dense hydroxyls in membranes achieves excellent electrochemical performances in flow battery application.
In Situ-Doped Superacid in the Covalent Triazine Framework Membrane for Anhydrous Proton Conduction in a Wide Temperature Range from Subzero to Elevated Temperature

Wenbo Huang,Bin Li,Yue Wu,Ying Zhang,Wenxiang Zhang,Shuhui Chen,Yu Fu,Tong Yan,Heping Ma

DOI: https://doi.org/10.1021/acsami.1c01134

2021-03-15

Abstract:Synthesis of solid-state proton-conducting membranes with low activation energy and high proton conductivity under anhydrous conditions is a great challenge. Here, we show a simple and convenient way to prepare covalent triazine framework membranes (CTF-Mx) with acid in situ doping for anhydrous proton conduction in a wide temperature range from subzero to elevated temperature (160 °C). The low proton dissociation energy and continuous hydrogen bond network in CTF-Mx make the membrane achieve high proton conductivity from 1.21×10-3 S cm-1 (−40 °C) to 2.08×10-2 S cm-1 (160 °C) under anhydrous conditions. Molecular dynamics and proton relaxation time analyses reveal proton hopping at low activation energies with greatly enhanced mobility in the CTF membranes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01134?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01134</a>.Materials and testing methods; synthesis of the model compound; 1H NMR spectra; FT-IR spectra; XRD analysis; self-sustaining and processable behavior; SEM images; EDS analysis; Nyquist plots; molecular simulation; representative Debye plots; and proton conductivity data of CTF-Mx (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01134/suppl_file/am1c01134_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
‘Proton escalator’ PEI and phosphotungstic acid containing nanofiber membrane with remarkable proton conductivity

Xiuwei Sun,Shumei Liu,Qingyin Wu,Shan Zhang,Hongrui Tian,Xue Bai,Zhuo Li,Ying Lu,Shuxia Liu

DOI: https://doi.org/10.1039/d1qi00026h

IF: 7.779

2021-01-01

Inorganic Chemistry Frontiers

Abstract:Polyethyleneimine (PEI) and phosphotungstic acid (HPW) build an efficient proton transmission path. The segmental movement of flexible PEI speeds up the migration of protons, which acts as a ‘proton-escalator’.

chemistry, inorganic & nuclear

Speeding protons with metal vacancies

CdPS 3 nanosheets-based membrane with high proton conductivity enabled by Cd vacancies

CdPS3 Nanosheets-Based Membrane with High Proton Conductivity Enabled by Cd Vacancies.

Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Subnanometer Nanowire‐Reinforced Construction of COF‐Based Membranes with Engineering Biomimetic Texture for Efficient and Stable Proton Conduction

Effectively Facilitating the Proton Conduction of Proton Exchange Membrane by Polydopamine Modified Hollow Metal−organic Framework

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Enhancing proton conduction of high temperature proton exchange membranes based on carbon dots doped polyvinyl chloride nanofibers

Enhanced Proton Transfer in Proton-Exchange Membranes with Interconnected and Zwitterion-Functionalized Covalent Porous Material Structures.

Sheet-dot-framework membrane towards efficient proton conduction and outstanding stability

Construction of unimpeded proton-conducting pathways in solution-processed nanoporous polymer membranes

Self-assembly of metal-organic framework onto nanofibrous mats to enhance proton conductivity for proton exchange membrane

Zwitterionic Nanoconfined Proton‐Sieve: Charged Casing for Accelerating Proton Conduction

Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

A Novel Route for Preparing Highly Proton Conductive Membrane Materials with Metal-Organic Frameworks

Proton Delivery Through a Dynamic 3D H-bond Network Constructed from Dense Hydroxyls for Advanced Ion-Selective Membranes

In Situ-Doped Superacid in the Covalent Triazine Framework Membrane for Anhydrous Proton Conduction in a Wide Temperature Range from Subzero to Elevated Temperature

‘Proton escalator’ PEI and phosphotungstic acid containing nanofiber membrane with remarkable proton conductivity