Abstract:To understand how thermocapillary forces manipulate the droplet motion in a confined microchannel, a lattice Boltzmann phase-field model is developed to simulate immiscible thermocapillary flows with consideration of fluid-surface interactions. Based on our recent work of Liu et al., 2013 54], an interfacial force of potential form is proposed to model the interfacial tension force and the Marangoni stress. As only the first-order derivatives are involved, the proposed interfacial force is easily combined with the wetting boundary condition to account for fluid-surface interactions. The hydrodynamic equations are solved using a multiple-relaxation-time algorithm with the interfacial force treated as a forcing term, while an additional convection-diffusion equation is solved by a passive-scalar approach to obtain the temperature field, which is coupled to the interfacial tension by an equation of state. The model is first validated against analytical solutions for the thermocapillary-driven convection in two superimposed fluids at negligibly small Reynolds and Marangoni numbers. It is then demonstrated to produce the correct equilibrium contact angle for a binary fluid with different viscosities when a constant interfacial tension is taken into account. Finally, we numerically simulate the thermocapillary flows for a microfluidic droplet adhering on a solid wall and subject to a simple shear flow when a laser is applied to locally heat the fluids, and investigate the influence of contact angle and fluid viscosity ratio on the droplet dynamical behavior. The droplet motion can be completely blocked provided that the contact angle exceeds a threshold value, below which the droplet motion successively undergoes four stages: constant velocity, deceleration, acceleration, and approximately constant velocity. When the droplet motion is completely blocked, three steady vortices are clearly visible, and the droplet is fully filled by two counter-rotating vortices with the smaller one close to the external vortex. The thermocapillary convection is strengthened with decreasing viscosity ratio of the droplet to the carrier fluid. For low viscosity ratios, the droplet motion is completely blocked and exhibits the similar behavior, but the structure of the internal vortices is more complicated at the lowest viscosity ratio. For high viscosity ratios, the droplet motion is partially blocked and undergoes a series of complex transitions, which can be explained as a result of the dynamically varying Marangoni forces. We develop a phase-field model for thermocapillary flows with surface wettability.We propose a surface force of potential form to model capillary and Marangoni forces.A cubic wetting boundary condition is introduced to account for surface wettability.Hydrodynamic equations are solved using an MRT lattice Boltzmann algorithm.Laser heating generates thermocapillary forces to block motion of droplet on a wall.

Thermocapillary Thin-Film Flows on a Compliant Substrate

Numerical Study of the Thermocapillary Instability in a Thin Liquid-Air Film

Rayleigh-Taylor Instability of Viscous Liquid Films under a Temperature-Controlled Inclined Substrate

Thermocapillary Effect on the Dynamics of Liquid Films Coating the Interior Surface of a Tube

Marangoni Flow of Thin Liquid Film Underneath a Topographical Plate

Thermocapillary Fingering of a Gravity-Driven Self-Rewetting Fluid Film Flowing Down a Vertical Slippery Wall

Three-dimensional Dynamics of Thin Liquid Films on Vertical Cylinders with Marangoni Effect

Thermocapillary Effect on the Dynamics of Falling Self-Rewetting Fluid Films Down a Heated Vertical Cylinder

Fundamental Effects in Nanoscale Thermocapillary Flow

Axisymmetric Flow Structure of Thin Liquid Film under Radial Temperature Difference

Modelling thermocapillary migration of a microfluidic droplet on a solid surface

The Effect of Thermocapillarity on the Dynamics of an Exterior Coating Film Flow Down a Fibre Subject to an Axial Temperature Gradient

Thermocapillary instabilities in a liquid layer subjected to an oblique temperature gradient: Effect of a prescribed normal temperature gradient at the substrate

Marangoni Flows in a Bilayer Liquid Microfilm Interface on Wave-Contoured Hot Substrates

Falling Film Flow of a Viscoelastic Fluid along a Wall

Thermo-capillarity effects on power-law liquids thin film over an unsteady stretching sheet

Thermocapillary instabilities in the liquid layer with two deformable surfaces

Dynamics of Thin Liquid Films Flowing Down the Uniformly Heated/cooled Cylinder with Wall Slippage

Stability Investigation on the Thin Films in Capillary

Probing interfacial effects with thermocapillary flows

Lattice Boltzmann Phase-Field Modeling of Thermocapillary Flows in A Confined Microchannel