Abstract:Treating the wastes generated from pulp and paper mills, such as black liquor and Fenton sludge is challenging. In this study, the biochar-supported Fe-Cu bimetallic catalysts were synthesized by a one-step pyrolysis method using Fenton sludge as iron source, acid-precipitated black liquor (APBL) as carbon source and copper nitrate as copper source. The catalysts were used to remove rhodamine B (RhB) dye from aqueous solution by Fenton-like reaction. The optimal catalyst (FeCu@BC 600-2 ) was pyrolyzed at 600 °C with an Fe/Cu mixing ratio of 2 and consisted of mesoporous biochar supported nanoscale Fe 3 O 4 and Cu 0 . It had a specific surface area of 104.6 m 2 ·g −1 and a saturation magnetization of 33.3 emu·g −1 . In the FeCu@BC 600-2 /H 2 O 2 system, RhB dye (10 mg·L -1 ) was completely removed within 60 min at acidic pH (initial pH 3, 0.2 g·L -1 catalyst, 1 mM H 2 O 2 ) or 6 h at neutral pH (initial pH 7, 0.25 g·L -1 catalyst, 25 mM H 2 O 2 ) at 30 °C. Moreover, the FeCu@BC 600-2 exhibited good magnetic separation ability, low metal leaching, excellent reusability and broad applicability to other synthetic dyes. The dye removal mechanism involved the synergistic effect of adsorption and catalytic oxidation (especially heterogeneous catalytic oxidation). At acidic pH, RhB degradation was due to •OH radical, which was generated from the activation of H 2 O 2 by ≡Cu(I) or Cu(I) oxidized from Cu 0 and ≡Fe(II) in Fe 3 O 4 . At neutral pH, RhB degradation was mainly due to •OH and 1 O 2 with the former being produced by ≡Cu(I) and ≡Fe(II). Furthermore, Cu(I) oxidized from Cu 0 and the active functional groups (such as sp 2 C = C) in the biochar facilitated the reduction of Fe(III) to Fe(II), resulting in a high catalytic oxidation efficiency.

Copper-based Catalyst from Waste Printed Circuit Boards for Effective Fenton-like Discoloration of Rhodamine B at Neutral Ph.

Tuning the Morphology and Surface Structure of MnOx@GF Through Ce for High-Efficiency Degradation of Rhodamine B by Electro-Fenton

Copper-doped carbon dots with enhanced Fenton reaction activity for rhodamine B degradation

Sustainable upcycling of copper from waste printed circuit boards with the assistance of tannic acid and Fe3+ to a magnetic heterogeneous catalyst

Synthesis of magnetic biochar-supported Fe-Cu bimetallic catalyst from pulp and paper mill wastes for the Fenton-like removal of rhodamine B dye

Copper-promoted heterogeneous Fenton-like oxidation of Rhodamine B over Fe3O4 magnetic nanocatalysts at mild conditions

Recyclable Printed Circuit Boards and Alkali Reduction Wastewater: Approach to a Sustainable Copper-Based Metal-Organic Framework

Tannic acid-assisted upcycling of Cu from waste printed circuit boards to an efficient peroxymonosulfate catalyst for the degradation of organic pollutants

Al/Ca-doped CuFe2O4 prepared from waste printed circuit boards as a magnetic peroxymonosulfate activator for the degradation of organic pollutants

Enhanced heterogeneous electro-Fenton process for degradation of rhodamine B: FeOCl/CF@AB composite cathode with superior efficiency and sustainability

Redox cycling of copper mediated by hydrazine: efficient catalyst systems for oxidative degradation of rhodamine B

Catalytic Pyrolysis of Waste-Printed Circuit Boards Using a Cu/Fe Bimetal Synergistic Effect to Enhance Debromination

Effective degradation of rhodamine B by electro-Fenton process, using ferromagnetic nanoparticles loaded on modified graphite felt electrode as reusable catalyst: in neutral pH condition and without external aeration

Synthesis, Characterization and Heterogeneous Photo-Fenton-like Catalyst Activity of a Novel Inorganic-Organic 2D Framework Based on Reduced Α-Keggin Phosphomolybdate

Ferrocene-functionalized graphitic carbon nitride as an enhanced heterogeneous catalyst of Fenton reaction for degradation of Rhodamine B under visible light irradiation

Degradation of Rhodamine B in Wastewater by Iron-Loaded Attapulgite Particle Heterogeneous Fenton Catalyst

Heterogeneous Electro-Fenton-Catalyzed Degradation of Rhodamine B by Nano-Calcined Pyrite

Enhanced Removal of Dye from Wastewater by Fenton Process Activated by Core-Shell NiCo2O4@FePc Catalyst

Kinetics and debromination studies on the pyrolysis of waste printed circuit boards with the addition of copper and copper oxides

Enhanced Cr(VI) reduction on natural chalcopyrite mineral modulated by degradation intermediates of RhB

Facile path for copper recovery from waste printed circuit boards via mechanochemical approach