Abstract:Although graphite has been used as anodes of lithium-ion batteries (LiBs) for 30 years, its unsatisfactory energy density makes it insufficient toward some new electronic products such as unmanned aerial vehicles. Herein, in situ synthesis of nano-GeP confined in nitrogen-doped carbon () fibers was designed and performed via coaxial electrospinning followed by a phosphating process. This way ensured the paper-like x electrode with high conductivity, high flexibility, and lightweight properties, which simultaneously solved the key scientific problems of difficulty in structural design and severe volume expansion of GeP. The inner diameter and wall thickness of the nanofibers can be effectively controlled by adjusting the size of electrospinning needles. It was suggested that the fibers not only effectively inhibited the growth of GeP, resulting in the synthesis of nano-GeP with size less than 50 nm, but also alleviated the volume expansion/agglomeration and improved the diffusion kinetics of Li+ in nano-GeP during cycling. The Li+ diffusion coefficient can be improved by reducing the inner diameter and wall thickness of the fibers. As a model system, the paper-like electrode () with a fiber diameter of 280 nm and a wall thickness of 110 nm exhibited the best electrochemical performance. When applied as anodes in LiBs, it displayed a reversible capacity of 612 mAh g–1 at the 600th cycle at 1 A g–1, while with a solid structure only delivered 239 mAh g–1. Furthermore, the also exhibited good long-term cycling stability at 5 A g–1, and the capacity displayed a slight difference of 221.2 and 209.0 mAh g–1 in a voltage range of 0∼3 V and 0∼1.5 V, respectively. The well-defined synthetic approach combined with unique nanostructural design provided a meaningful reference for the rational design and development of next-generation flexible and high-performance LiB anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07387?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07387</a>.Additional data analysis including digital photos (Figure S1), SEM images and C, Ge, P, and N elemental mapping images (Figure S2), TGA curves (Figure S3), and rate CV curves (Figure S4) of x. In addition to that, the XRD pattern, SEM image, CV curves, discharge/charge profiles, and cycling capacity of the LiNi0.8Co0.15Ai0.05O2 cathode are supplied (Figure S5). Table S1 is the fitted data of each electronic components (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07387/suppl_file/am1c07387_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Structural Design of Ge-based Anodes with Chemical Bonding for High-Performance Na-ion Batteries

A Self-Healing Layered GeP Anode for High-Performance Li-ion Batteries Enabled by Low Formation Energy

Facile Synthesis of Amorphous Ge Supported by Ni Nanopyramid Arrays As an Anode Material for Sodium‐Ion Batteries

Zn2geo4@C Core-Shell Nanorods As Highly Reversible Anode Materials for Lithium-Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Germanium Nanoparticles Supported by 3D Ordered Macroporous Nickel Frameworks As High-Performance Free-Standing Anodes for Li-ion Batteries

Confining Nano-GeP in Nitrogenous Hollow Carbon Fibers toward Flexible and High-Performance Lithium-Ion Batteries

In Situ Construction of an Ultrarobust and Lithiophilic Li-Enriched Li–N Nanoshield for High-Performance Ge-Based Anode Materials

Amorphous Mesoporous GeO X Anode for Na-ion Batteries with High Capacity and Long Lifespan.

Amorphous Germanium Nanomaterials as High‐Performance Anode for Lithium and Sodium‐Ion Batteries

The Development of Si and Ge-Based Nanomaterials for High Performance Lithium Ion Battery Anodes

Ionic Liquid Electrodeposition of Strain-Released Germanium Nanowires As Stable Anodes for Lithium Ion Batteries

CTAB-assisted growth of self-supported Zn2GeO4 nanosheet network on a conductive foam as a binder-free electrode for long-life lithium-ion batteries

Synthesis and Fast Exfoliation of Layered GeP Nanosheets for Advanced Li-Ion Batteries

Interfacial Bonding of SnSb Alloys with Graphene toward Ultrafast and Cycle-Stable Na-Ion Battery Anodes

Nitrogen-rich three-dimensional porous carbon mosaicked Na4Ge9O20 as anode material for high-performance lithium-ion batteries

Structural Strategies for Germanium‐Based Anode Materials to Enhance Lithium Storage

Fully Active Bimetallic Phosphide Zn 0.5 Ge 0.5 P: A Novel High-Performance Anode for Na-Ion Batteries Coupled with Diglyme-Based Electrolyte

Surface modification of electrospun nitrogen-doped Ge@C fiber with highly porous NiCo 2 O 4 layer as high-performance lithium-ion battery anode

Sodium Storage Mechanism and Electrochemical Performance of Layered GeP As Anode for Sodium Ion Batteries