Abstract:The authors develop an integrated strategy to manipulate Li2S redox kinetics of CoP/MXene catalyst via electron‐donor Cu doping and meanwhile construct a dense S/Cu0.1Co0.9P/MXene cathode, which presents large volumetric capacity of 1664 Ah L−1 and high areal capacity of ≈8.3 mAh cm−2 (lean electrolyte) at 0.1 C, and its atomic‐level manipulation mechanism of Li2S redox kinetics is uncovered. Designing dense thick sulfur cathodes to gain high‐volumetric/areal‐capacity lithium–sulfur batteries (LSBs) in lean electrolytes is extremely desired. Nevertheless, the severe Li2S clogging and unclear mechanism seriously hinder its development. Herein, an integrated strategy is developed to manipulate Li2S redox kinetics of CoP/MXene catalyst via electron‐donor Cu doping. Meanwhile a dense S/Cu0.1Co0.9P/MXene cathode (density = 1.95 g cm−3) is constructed, which presents a large volumetric capacity of 1664 Ah L−1 (routine electrolyte) and a high areal capacity of ≈8.3 mAh cm−2 (lean electrolyte of 5.0 μL mgs−1) at 0.1 C. Systematical thermodynamics, kinetics, and theoretical simulation confirm that electron‐donor Cu doping induces the charge accumulation of Co atoms to form more chemical bonding with polysulfides, whereas weakens CoS bonding energy and generates abundant lattice vacancies and active sites to facilitate the diffusion and catalysis of polysulfides/Li2S on electrocatalyst surface, thereby decreasing the diffusion energy barrier and activation energy of Li2S nucleation and dissolution, boosting Li2S redox kinetics, and inhibiting shuttling in the dense thick sulfur cathode. This work deeply understands the atomic‐level manipulation mechanism of Li2S redox kinetics and provides dependable principles for designing high‐volumetric‐energy‐density, lean‐electrolyte LSBs through integrating bidirectional electro‐catalysts with manipulated Li2S redox and dense‐sulfur engineering.

A Novel Strategy for the Selection of Polysulfide Adsorbents Toward High‐Performance Lithium‐Sulfur Batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Construction of Soft Base Tongs on Separator to Grasp Polysulfides from Shuttling in Lithium-Sulfur Batteries.

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design

Tailoring Surface Acidity of Metal Oxide for Better Polysulfide Entrapment in Li‐S Batteries

Fe3P Electrocatalysts Assisted Carbon Based Sandwich Sulfur Cathode “top–bottom” Strategy for High Rate and High Temperature Lithium–sulfur Batteries

Promoting “strong Adsorption” and “fast Conversion” of Polysulfides in Li‐S Batteries Based on Conductive Sulfides Host with Hollow Prism Structure and Surface Defects

Tin Disulfide Embedded on Porous Carbon Spheres for Accelerating Polysulfide Conversion Kinetics Toward Lithium-Sulfur Batteries.

Immobilizing Polysulfide by In Situ Topochemical Oxidation Derivative TiC@Carbon‐Included TiO 2 Core–Shell Sulfur Hosts for Advanced Lithium–Sulfur Batteries

Design of Novel Transition-Metal-Doped C6N2 with High-Efficiency Polysulfide Anchoring and Catalytic Performances Toward Application in Lithium-Sulfur Batteries.

A bi-functional catalyst strategy to selectively regulate sulfur redox kinetics in lithium-sulfur batteries

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Synergistic Adsorption-Catalytic Sites TiN/Ta2O5 with Multidimensional Carbon Structure to Enable High-Performance Li-S Batteries

Unraveling the Atomic‐Level Manipulation Mechanism of Li2S Redox Kinetics via Electron‐Donor Doping for Designing High‐Volumetric‐Energy‐Density, Lean‐Electrolyte Lithium–Sulfur Batteries

Bimetallic sulfides heterostructure efficient adsorption and catalytic of polysulfides for high-performance lithium-sulfur batteries

In Situ Synthesis of Organopolysulfides Enabling Spatial and Kinetic Co-Mediation of Sulfur Chemistry

Regulating Polysulfide Diffusion and Deposition via Rational Design of Core–Shell Active Materials in Li–S Batteries

Quantitative Investigation of Polysulfide Adsorption Capability of Candidate Materials for Li-S Batteries

Feasible Catalytic-Insoluble Strategy Enabled by Sulfurized Polyacrylonitrile with In Situ Built Electrocatalysts for Ultrastable Lithium–Sulfur Batteries