Removal of As(V) and As(III) Species from Wastewater by Adsorption on Coal Fly Ash

Yulong Wang,Shaofeng Wang,Guoqing Zhang,Xin Wang,Shuyan Zang,Yongfeng Jia
DOI: https://doi.org/10.5004/dwt.2019.23764
IF: 1.1
2019-01-01
Desalination and Water Treatment
Abstract:Arsenic is ubiquitous in many natural systems and poses great risk to human health. Coal fly ash is a waste by-product of thermal power plants that may cause serious environmental problems. To reduce environmental hazards and realize high-value utilization of coal fly ash, it was characterized using the scanning electron microscopy, Brunauer-Emmet-Teller, and powder X-ray diffraction methods, and the arsenate (As(V)) and arsenite (As(III)) removal performance of coal fly ash used as an adsorbent from aqueous solutions was investigated using batch experiments. Adsorption kinetics study revealed that the adsorption of As(V) and As(III) by fly ash was fast in the first 4 h and equilibrium was achieved within 48 h at pH 5.0 with an initial arsenic concentration of 1 mg/L and an adsorbent dose of 4 g/L. The adsorption kinetics are well described by the pseudo-second-order rate equation model, with high coefficients of determination (R-2) of 0.9991 and 0.9925 for As(V) and As(III) adsorption, respectively. The Langmuir adsorption isotherms of arsenic adsorption indicated that the highest adsorption capacities of As(V) and As(III) at pH 5.0 were 666.67 and 232.56 mg/kg, respectively. The results of the arsenic adsorption edges conducted at different pH values from 3 to 11 with initial arsenic concentration of 1 mg/L and adsorbent dose of 4 g/L revealed that the removal of As(V) was obviously more than that of As(III) under the same conditions, with respect to the same pH. Different from the sharp maximum adsorption at pH around 5.0 on the As(V) adsorption edge, the As(III) adsorption maximum is broad, occurred in the pH range of approximately 5.0 to 7.0. The significant differences in the adsorption of As(V) and As(III) on fly ash could be due to the discrepant electrostatic interaction between Al-based hydroxyl groups on the surface of fly ash and arsenic species in aqueous solution. Furthermore, this approach provides a possible method for treating arsenic wastewater and potential application for the reuse of coal fly ash generated by other industrial activities.
What problem does this paper attempt to address?