Abstract:Biomaterials and coating techniques unlock major benefits for advanced medical therapies. Here, we explored layer-by-layer (LbL) deposition of silk fibroin (SF) by dip coating to deploy homogeneous films on different materials (titanium, magnesium, and polymers) frequently used for orthopedic and other bone-related implants. Titanium and magnesium specimens underwent preceding plasma electrolytic oxidation (PEO) to increase hydrophilicity. This was determined as surface properties were visualized by scanning electron microscopy and contact angle measurements as well as Fourier transform infrared spectroscopy (FTIR) analysis. Finally, biological in vitro evaluations of hemocompatibility, THP-1 cell culture, and TNF-α assays were conducted. A more hydrophilic surface could be achieved using the PEO surface, and the contact angle for magnesium and titanium showed a reduction from 73 to 18° and from 58 to 17°, respectively. Coating with SF proved successful on all three surfaces, and coating thicknesses of up to 5.14 μm (±SD 0.22 μm) were achieved. Using FTIR analysis, it was shown that the insolubility of the material was achieved by post-treatment with water vapor annealing, although the random coil peak (1640-1649 cm-1) and the α-helix peak (at 1650 cm-1) were still evident. SF did not change hemocompatibility, regardless of the substrate, whereas the PEO-coated materials showed improved hemocompatibility. THP-1 cell culture showed that cells adhered excellently to all of the tested material surfaces. Interestingly, SF coatings induced a significantly higher amount of TNF-α for all materials, indicating an inflammatory response, which plays an important role in a variety of physiological processes, including osteogenesis. LbL coatings of SF are shown to be promising candidates to modulate the body's immune response to implants manufactured from titanium, magnesium, and polymers. They may therefore facilitate future applications for bioactive implant coatings. However, further in vivo studies are needed to confirm the proposed effects on osteogenesis in a physiological environment.

Tightly Adhered Silk Fibroin Coatings on Ti6Al4V Biometals for Improved Wettability and Compatible Mechanical Properties

Biocompatible PVTF Coatings on Ti with Improved Bonding Strength

Enhancing Osseointegration of TC4 Alloy by Surficial Activation Through Biomineralization Method

Mechanical and biological properties of silk fibroin/carbon nanotube nanocomposite films

Hexafluoroisopropanol based silk fibroin coatings on AZ31 biometals with enhanced adhesion, corrosion resistance and biocompatibility

Layer-by-Layer Deposition of Regenerated Silk Fibroin─An Approach to the Surface Coating of Biomedical Implant Materials

The effect of coimmobilizing heparin and fibronectin on titanium on hemocompatibility and endothelialization.

Application of silk fibroin coatings for biomaterial surface modification: a silk road for biomedicine

Electrophoretic-deposited Novel Ternary Silk Fibroin/graphene Oxide/hydroxyapatite Nanocomposite Coatings on Titanium Substrate for Orthopedic Applications

The biocompatibility of silk fibroin films containing sulfonated silk fibroin.

Surface modification of titanium implants by silk fibroin/Ag co-functionalized strontium titanate nanotubes for inhibition of bacterial-associated infection and enhancement of in vivo osseointegration

Cladding of Titanium/fluorapatite Composites Onto Ti6Al4V Substrate and the in Vitro Behaviour in the Simulated Body Fluid

Enhanced anticorrosion and tribological properties of Ti6Al4V alloys with Fe3O4/HA coatings

Citric acid fine-tuned silk fibroin/silver nanocomposite coating affords biomimetic, infection-defensive and pro-healing/osteo-angiogenic microenvironments for functional implant osseointegration

Silk Fibroin-Based Coating with Ph-Dependent Controlled Release of Cu2+ for Removal of Implant Bacterial Infections.

Surface Engineering of Titanium Thin Films with Silk Fibroin Via Layer-by-layer Technique and Its Effects on Osteoblast Growth Behavior.

Enhanced Mechanical Performance of Biocompatible Silk Fibroin Films Through Mesoscopic Construction of Hierarchical Structures

Modification of Ti6Al4V Substrates with Well-defined Zwitterionic Polysulfobetaine Brushes for Improved Surface Mineralization

HHC-36 antimicrobial peptide loading on silk fibroin (SF)/hydroxyapatite (HA) nanofibrous-coated titanium for the enhancement of osteoblast and bactericidal functions

Electrochemical deposition multi-walled carbon nanotube coatings on the surface of Ti6Al4V alloy for enhancing its biotribological properties

Improving the osteointegration of Ti6Al4V by zeolite MFI coating