Abstract:Supercritical carbon dioxide power cycle is considered as one of the promising systems of next generation power cycle. Nevertheless, the hydraulic characteristics of typical heat source components under operating conditions (gas-like region) are not clear, and the present conclusions for flow characteristics of non-isothermal fluids are also not consistent. In this work, the turbulent flow of supercritical CO2 in a vertical upward tube was studied experimentally and numerically. The range of experiment parameters was set as 750–2800 kg/(m2s) of mass flux, 10–28 MPa of pressure, 200–410 kW/m2 of heat flux and 65–500 °C of bulk flow temperature. Furthermore, the feasibility of SST k-omega model was verified by experiment results. The effects of mass flux and pressure on friction pressure drop under non-isothermal conditions are basically consistent with those under isothermal conditions. However, the increase of heat flux leads to the decrease of friction pressure drop and friction factor. Under high heat flux condition, both the viscous shear stress and Reynolds shear stress decrease. The viscous shear stress contributes slightly to the mechanical energy dissipation, hence the Reynolds shear stress is the crux to the change of friction pressure drop. Further studies show that the decrease of density in near-wall region and the decrease of turbulence fluctuation in core region are critical to the decrease of mechanical energy dissipation. According to the theoretical and dimensional analysis, the dimensionless number Xi that can be qualitatively analyzed for the ratio of thermally-induced force to inertial force was obtained. Finally, a high-precision correlation of friction factor was proposed. The proportion of calculated value within 10% and 30% error ranges is 76.65% and 100%, respectively.

The Flow Transition Characteristics of Supercritical CO2 Based Closed Natural Circulation Loop (NCL) System

Experimental Study of Trans-Critical and Supercritical Co2 Natural Circulation Flow in A Closed Loop

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Experimental investigation of CO2 thermosyphon flow and heat transfer in the supercritical region

Effects of Inclination Angle and Operation Parameters on Supercritical Co2 Natural Circulation Loop

Thermal and Hydrodynamic Characteristics of Supercritical Co2 Natural Circulation in Closed Loops

Near-Critical Natural Circulation Flows Inside an Experimental Loop: Stability Map and Heat Transfer

Principles, Experiments, and Numerical Studies of Supercritical Fluid Natural Circulation System

Effect of heat transfer on the instabilities and transitions of supercritical CO2 flow in a natural circulation loop

Natural convective flow and heat transfer of supercritical CO2 in a rectangular circulation loop

Study of Trans-Critical CO2 Natural Convective Flow with Unsteady Heat Input and Its Implications on System Control

Flow and Heat Transfer Characteristics of Supercritical CO2 in a Natural Circulation Loop

Effects of Heater Orientations on the Natural Circulation and Heat Transfer in A Supercritical Co2 Rectangular Loop

Natural Convection Supercritical Fluid Systems for Geothermal, Heat Transfer, and Energy Conversion

Numerical Investigation of Thermohydraulic Characteristics in Supercritical CO2 Natural Circulation Loop with Spatially Varying Temperature

High‐heat Flux Flow and Heat Transfer Transitions in a Supercritical Loop: Numerical Verification and Correlation

The steady behavior of the supercritical carbon dioxide natural circulation loop

S056011 Study on a Natural Circulation Solar Water Heater Using Supercritical CO_2 As Working Fluid

Numerical Simulation on the Flow and Heat Transfer of Supercritical CO2 in Sudden Expansion Pipe under Cooling Condition

402 Flow and Heat Transfer Performance of Natural Refrigerant-Supercritical CO_2

Flow resistance analysis of non-isothermal supercritical CO2