Study on the Effect of an Inert Atmosphere for the Heat Treatment Coloration of Wool Fabric

Daiqi Li,Bin Tang,Zhenglin Xu,Guangming Cai
DOI: https://doi.org/10.1177/0040517519845686
IF: 2.3
2019-01-01
Textile Research Journal
Abstract:This article is focused on a novel method to color wool fabric via heat treatment under an inert atmosphere. It can not only give new color to the fabric but also minimize pollution, because it is water and dye-free. The effects of temperature, time and different inert atmospheres (nitrogen, argon) used in the heat treatment on wool fabric color were studied. The bending stiffness, the crease recovery angle and tensile testing were used to analyze the mechanical properties of wool fabric before and after heat treatment. The color fastness to soaping and light of wool fabric after inert atmosphere heat treatment were compared with that of traditional basic yellow dyed wool fabric. The results showed that the K/S value of wool fabric treated with a nitrogen and argon atmosphere increased with the increasing temperature and time. Under the same heat treatment conditions, the maximum K/S value of fabric heat treated under nitrogen was higher than that under argon. The bending stiffness and crease recovery angle performance were improved and positively correlated with the heat treatment temperature and time. The samples treated under the same conditions under nitrogen showed higher bending stiffness and a lower crease recovery angle than under argon. The contact angle of the wool fabric after the treatment would decrease first and then increase with the increasing temperature. The tensile strength of the wool fabric would decrease with increasing temperature and time of the heat treatment in both nitrogen and argon, and the tensile strength of the wool fabric after treatment was higher than 80% of the original tensile strength, although the breaking elongation decreased. The color fastness to soaping and light of wool fabric after inert atmosphere heat treatment were better than for the traditional basic yellow dyed wool fabric. Therefore, the use of inert atmosphere heat treatment to endow wool fabric color is a potential research direction.
What problem does this paper attempt to address?