Abstract:Aero-engine nacelles have to fulfill design requirements at both cruise and off-design conditions. Under engine windmilling conditions the ingested streamtube massflow is relatively low. A key off-design condition is take-off, which, in conjunction with an engine windmilling scenario, results in the stagnation point of the ingested streamtube being located significantly inside the intake. The combination of high angle of attack and low engine massflow rates leads to a strong flow acceleration and subsequent diffusion of the boundary layer on the upper quadrants of the external nacelle cowl, which can terminate with subsonic separation from the leading-edge. Under this condition, Reynolds number effects can play a dominant role on the separation onset and characteristics and 3D-annular wind tunnel tests cannot always achieve Reynolds' number equivalent to full scale. A novel quasi-2D rig configuration representative of the aerodynamics of a full-size aero-engine nacelle under windmilling end of runway conditions examined in detail the characteristics of the boundary layer on the external cowl of a nacelle prior to diffusion-induced separation. Separation of the boundary layer was independently promoted through changes to represent different engine massflow rates and freestream Mach number on the rig to determine the limits of steady Reynolds Averaged Navier Stokes (RANS) methods to discern the onset of boundary layer separation. For the conditions and geometry investigated, the combined experimental and computational results showed that there was laminar to turbulent transition of the boundary layer ahead of the subsonic diffusion. The work showed that steady RANS can predict the onset of boundary layer separation with an uncertainty of approximately 10% on notional engine massflow rate and 0.05 on freestream Mach number relative to a nominal operating freestream Mach number of 0.25. This provides guidance for the industrial design and optimization of future windmilling-tolerant nacelles for large ultra-high bypass ratio turbofan engines.

Natural Laminar Flow Optimization of Transonic Nacelle Based on Differential Evolution Algorithm

Numerical Optimization of Transonic Natural Laminar Flow Nacelles

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Double-decoupled inverse design of natural laminar flow nacelle under transonic conditions

Supercritical natural laminar flow airfoil optimization for regional aircraft wing design

A nacelle inlet design approach with more three-dimensional geometric consideration

Aerodynamic Optimization Framework for a Three-Dimensional Nacelle Based on Deep Manifold Learning-Assisted Geometric Multiple Dimensionality Reduction

Application of “objective Space Filtration” on Nacelle Cowl Design Variable Generation

A New Circular Section Control for Streamwise Profiles in Aeroengine Nacelle Cowl Design and Optimization

A Practical Optimization Design Method for Transport Aircraft Wing/Nacelle Integration

Nacelle optimisation through multi-fidelity neural networks

Artificial neural network for preliminary design and optimisation of civil aero-engine nacelles

Deep Learning Based Adaptive Deformation of Aerodynamic Shape for Ducted Propellers

Surrogate-based optimization of nacelle intake with fan-intake interaction: Mitigating flow separation under crosswind

Natural Laminar Flow Airfoil Design via Adjoint-Based Transition Onset Delay

Supercritical Wing Design and Optimization for Transonic Civil Airplane

Airfoil Optimization Using a Machine Learning-Based Optimization Algorithm

Numerical and experimental investigations of diffusion-induced boundary layer separation on aero-engine nacelles

Numerical Investigation on the Transition Flow around NLF Airfoil

The Objective Space and the Formulation of Design Requirement in Natural Laminar Flow Optimization

Integrated design optimization of ducted lift fan for lift enhancement and noise reduction based on nested NFFD control body