Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Electrospun N-P WO3/CuO Heterostructure Nanofibers As an Efficient Sarin Nerve Agent Sensing Material at Room Temperature

3D hybrid Ni-Multiwall carbon nanotubes/carbon nanofibers for detecting sarin nerve agent at room temperature

Study of A Qcm Dimethyl Methylphosphonate Sensor Based on A Zno-Modified Nanowire-Structured Manganese Dioxide Film

Fabrication of Electrospun Co3O4/CuO P-P Heterojunctions Nanotubes Functionalized with HFIP for Detecting Chemical Nerve Agent under Visible Light Irradiation

Hierarchical Nanoheterostructure of HFIP-Grafted Α-Fe2o3@multiwall Carbon Nanotubes As High-Performance Chemiresistive Sensors for Nerve Agents

Enhanced Dimethyl Methylphosphonate Detection Based on Two-Dimensional WSe2 Nanosheets at Room Temperature.

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection

High-performance p-hexafluoroisopropanol phenyl functionalized multi-walled carbon nanotube film on surface acoustic wave device for organophosphorus vapor detection

Controllable synthesis of conjugated microporous polymer films for ultrasensitive detection of chemical warfare agents

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Hole doping and surface functionalization of single-walled carbon nanotube chemiresistive sensors for ultrasensitive and highly selective organophosphor vapor detection.

SAW Chemical Array Device Coated with Polymeric Sensing Materials for the Detection of Nerve Agents

Acetylcholinesterase-functionalized Two-Dimensional Photonic Crystal for the Sensing of G-series Nerve Agents

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Selective and Rapid Detection of Nerve Agent Simulants by Polymer Fibers with a Fluorescent Chemosensor in Gas Phase

Controllable Synthesis of Conjugated Microporous Polymer Films for Ultra-sensitive Detection of Chemical Warfare Agents

Chemiresistor Devices for Chemical Warfare Agent Detection Based on Polymer Wrapped Single-Walled Carbon Nanotubes

HFIP-Functionalized Co 3 O 4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents.

Novel Pyrenehexafluoroisopropanol Derivative-Decorated Single-Walled Carbon Nanotubes for Detection of Nerve Agents by Strong Hydrogen-Bonding Interaction.

A Chemodosimetric Chemosensor for the Ratiometric Detection of Nerve Agent-Mimic DCP in Solution and Vapor Phase