Abstract:Low-crested and submerged breakwaters, serving as one of the coastal defensive structures, are usually used to dissipate wave energy and help reduce wave impacts on coastal infrastructures and communities especially during extreme weather events, such as hurricanes or tsunamis. Many recent post disaster surveys indicated that breakwaters did not perform as designed during some extreme weather events. The performance of the breakwaters subjected to strong waves is still not clear especially when the breakwaters turn into the submerged condition. Meanwhile, many researches on the breakwaters are usually carried out in a two-dimensional wave flume either experimentally or numerically. However, the incident wave could impact the breakwaters from any directions instead of only from the head-on direction, which should be a three-dimensional physical process of wave and breakwater interactions. Therefore, it is essential to conduct a three-dimensional numerical study to investigate the breakwater performance in reducing the transmitted wave energy behind it and compare the results with those from a two-dimensional study. This study is to investigate the effect of three-dimensional interactions of obliquely incident waves and breakwaters on wave potential energy reduction based on the proposed energy transmission coefficient. Computational fluid dynamics (CFD) simulations are carried out in OpenFOAM to simulate the interactions between the wave and breakwater using a three-dimensional Reynolds-averaged Navier-Stokes (RANS) model together with the k-ω SST turbulence model. Two validation studies are performed to validate the applicability of the proposed numerical model in two-dimensional and three-dimensional numerical simulations. Sensitivity analyses are performed to investigate the effect of different parameters associated with breakwater geometries and incident wave properties on a two-dimensional submerged breakwater performance in reducing the transmitted wave height. The effects of incident wave angle on the transmitted wave energy reduction for a three-dimensional submerged and surface breakwater are then investigated and compared with the two-dimensional simulation results. The numerical studies indicate that a three-dimensional simulation is more appropriate to describe a breakwater behavior in the real-world scenario.

Numerical Study of the Interaction Between Peregrine Breather Based Freak Waves and Twin-Plate Breakwater

Numerical Investigation on the Hydrodynamic Characteristics of Coastal Freak Wave Using a CIP-based Model

Numerical Study on the Wave Dissipating Performance of a Submerged Heaving Plate Breakwater

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Impact of Multiphase Flow Simulation of Breaking Waves on a Vertical Seawall with a Recurved Parapet

Dynamic Response of a Horizontal Plate Dropping Onto Nonlinear Freak Waves Using a Fluid–structure Interaction Method

Numerical Study of Nonlinear Freak Wave Impact Underneath a Fixed Horizontal Deck in 2-D Space

Numerical investigation of dynamic soil response around a submerged rubble mound breakwater

Numerical Study of Wave Impact on the Deck-House Caused by Freak Waves

Experimental and Numerical Study on Freak Wave Using the Peregrine Breather

Numerical simulation of the interaction between regular wave of large amplitude and floating box-type breakwater

Numerical Analysis on Three-Dimensional Green Water Events Induced by Freak Waves

Numerical Simulation of the Interaction Between Waves and Pile Breakwater with Horizontal Slotted Plates

Numerical Simulation of Deterministic Freak Wave Sequences and Wave-Structure Interaction

Response Of Beams Under The Impact Of Freak Waves

3D Numerical Simulation of Wave Transmission for Low-Crested and Submerged Breakwaters

Numerical Modeling of Permeable Floating Breakwater under the Action of Waves

Numerical Investigation of the Interaction Between an Inverse T-type Fixed/floating Breakwater and Regular/irregular Waves

Numerical study on wave-dissipating performance and mooring force of a new type of floating breakwater

Development Of 3-D Numerical Wave Tank And Applications On Comb-Type Breakwater