Abstract:Ventilative cooling is an energy-saving technology to diminish thermal discomfort and overheating risk of buildings, meanwhile achieving high indoor air quality (IAQ). However, there is still no optimal control strategy in practice, which considerably limits its application. This study developed a typical office building model to evaluate the performance of ventilative cooling systems with different control parameters and strategies for five typical cities in different climatic zones of China. Results showed that, when the control parameter was selected as the upper limit of satisfied comfortable zone by 90% of the occupants, the adaptive thermal comfort (ATC) model, which outperformed the other models in terms of outdoor air utilization, was not necessarily optimal in terms of energy efficiency. The outdoor air utilization potential based on the indoor dry-bulb air temperature (Td) and indoor operative temperature (Top) control was similar, but the energy usage varies considerably, especially in the hot climatic zones. When the overheating period controlled based on the thermal comfort models was the same, the energy usage would be underestimated by 16%–38% without considering the effect of radiant temperature. The ATC-based control could have up to 37% of energy-saving compared to thermostatic control, but inappropriately low limits could make it less advantages to achieve energy-saving. The energy-saving potential associated with the PMV and ATC controls showed a completely opposite trend in the different climatic zones. The analysis results indicate that eliminating the drawbacks of the lower limit in the ATC model is an effective way to demonstrate energy-saving effectiveness. The findings of this study will contribute to the effective improvement of the application potential of ventilative cooling in different climatic zones.

PMV-based Dynamic Optimization of Energy Consumption for a Residential Task/ambient Air Conditioning System in Different Climate Zones

Energy Performance of a Bedroom Task/ambient Air Conditioning (TAC) System Applied in Different Climate Zones of China

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Analysis of climate zones’ effects on energy consumption of a bedroom TAC system

Parameter Optimization for Operation of A Bed-Based Task/Ambient Air Conditioning (tac) System to Achieve A Thermally Neutral Environment with Minimum Energy Use

Operating Optimization for Improved Energy Consumption of a TAC System Affected by Nighttime Thermal Loads of Building Envelopes

A Simplified Numerical Study on the Energy Performance and Thermal Environment of a Bedroom TAC System

Reduction of energy consumption for a TAC system applied to sleeping environments with varying envelope thermal load

Optimization of Room Air Temperature in Stratum-Ventilated Rooms for Both Thermal Comfort and Energy Saving

A Multi-Objective Study on the Operation of Task/Ambient Air Conditioning Systems in Subtropics

Comparative Studies on Using RSM and TOPSIS Methods to Optimize Residential Air Conditioning Systems

Performance Evaluation of Ventilative Cooling Systems for Buildings under Different Control Parameters and Strategies

A Method for Energy Consumption Optimization of Air Conditioning Systems Based on Load Prediction and Energy Flexibility

Optimization of Night Mechanical Ventilation Strategy in Summer for Cooling Energy Saving Based on Inverse Problem Method

Dynamic thermal demand analysis of residential buildings based on IoT air conditioner

Multi-mode ventilation: An efficient ventilation strategy for changeable scenarios and energy saving

Residential Indoor Thermal Environment Investigation and Analysis on Energy Saving of Air Conditioning in Hot Summer and Warm Winter Zone in China

A Study on Occupant Behaviour Related to Air-Conditioning Usage in Residential Buildings

Prediction and Evaluation of Air Conditioner Energy Consumption of Residential Buildings in the Yangtze River Basin

Experimental and Numerical Studies on the Performance Evaluation of A Bed-Based Task/Ambient Air Conditioning (tac) System

Performance Evaluation of an Air Conditioning System with Different Heights of Supply Outlet Applied to a Sleeping Environment