Acid-catalyzed hydrothermal treatment of sewage sludge: effects of reaction temperature and acid concentration on the production of hydrolysis by-products
Van Toi Pham,Chung-Yu Guan,Po-Chun Han,Babasaheb M. Matsagar,Kevin C. W. Wu,Tansir Ahamad,Ching-Yuan Chang,Chang-Ping Yu
DOI: https://doi.org/10.1007/s13399-021-01495-w
IF: 4.05
2021-05-04
Biomass Conversion and Biorefinery
Abstract:Sewage sludge (SS) is an organic biomass from wastewater treatment plants, but the use of SS to produce bio-based chemicals under acid-catalyzed hydrolysis (ACH) processes is not well investigated. In this study, ACH processes were performed at 120, 150, and 180 °C using sulfuric acid (H2SO4) with concentrations of 0–0.5 M within a reaction time of 90–180 min to produce bio-based chemicals from SS. The results showed that the reaction temperature, reaction time, and concentrations of H2SO4 affected the yields of sugars, levulinic acid (LA), and 5-hydroxymethylfurfural (HMF). The highest xylose and glucose yields were 7.69 mol% and 5.22 mol% at 120 °C with 0.5 M H2SO4 during the 180 min of reaction time, respectively. Besides, under the ACH process at 180 °C and 180 min, the yield of LA reached a maximum value of 0.48 mol% at 0.5 M H2SO4, and the highest yield of HMF was 1.66 mol% at 0.1 M H2SO4. The data obtained also indicated that the ACH process led to an increase in soluble chemical oxygen demand, dissolved organic carbon, and total dissolved nitrogen. Fluorescence excitation-emission matrix of dissolved organic matter and thermogravimetric analysis of the treated SS further supported the enhanced solubilization of SS after ACH process, especially under higher reaction temperature and concentrations of H2SO4. Although the lower yields of bio-based chemicals might restrict the downstream recovery of the target products, the largely improved SS solubilization by ACH suggests that acid-catalyzed hydrothermal hydrolysis process has potential as an alternative pretreatment method of SS.
energy & fuels,engineering, chemical