Abstract:Collapse mechanisms of sandwich panels with Miura-ori cores are analysed and classification of the deformation regimes under three-point bending is proposed. It is revealed that the homogenisation approach to the core material properties is not applicable to the deformation of panels with relatively strong origami cores due to the immediate simultaneous local deformations of the core and face sheets. To describe this deformation regime, an analytical model based on the development of new stationary hinge lines in Miura-ori cells and rigid motion rotation of the adjacent planes is proposed. The model pertains to a single degree-of-freedom model governed by the global bending angle of the panel. On the other hand, the homogenisation approach to the core material properties proved to be applicable to bending analysis of panels with relatively soft Miura-ori cores. This approach is used to analytically obtain the collapse load related to several deformation modes. Parametric FE analysis is conducted to further explore the deformation regimes of panels with different face sheet thicknesses. Experiments were conducted to validate the finite element studies and analytical models. A good agreement between the analytically predicted collapse forces and those obtained by the FE simulations is shown. Deformation mode maps are constructed based on the analytical and FE analyses in terms of the face sheet thicknesses and core strength. A brief comparison between the bending strength of sandwich panels with Miura-ori cores and panels with PVC and honeycomb cores is presented, demonstrating the superiority of the honeycomb cores loaded in the out-of-plane direction. On the other hand, the possibility of the development of high shear strains in metallic Miura-ori cores without damage gives them advantages compared to three-point bending of panels with low density PVC foam cores.

An Equivalent Model for Sandwich Panel with Double-Directional Trapezoidal Corrugated Core

Equivalent-oriented model for sandwich panels with ZPR accordion honeycomb

Plastic Forming of Sandwich Panels and Numerical Analyses of the Forming Processes Based on Elastoplastic Equivalent Model

A novel computational framework for exact stress analysis and bending behavior of sandwich panels with non-homogeneous cores

Study on damage failure for a new double-triangular truss core sandwich structure

Constitutive Model For Quasi-Static Deformation Of Metallic Sandwich Cores

A layerwise/solid-element method of the linear static and free vibration analysis for the composite sandwich plates

Theoretical and numerical analysis of buckling stability of bi-directional corrugated sandwich panels

A finite element model for analyzing curved surface sandwich panel forming

A compressible layerwise third-order shear deformation theory with transverse shear stress continuity for laminated sandwich plates

Quasi-static three-point bending of sandwich panels with Miura-ori cores

Experimental investigations into the dynamic response of sandwich panels with multi-layered corrugated cores subjected to underwater impulsive load

Study on the Shear Modulus Based Equivalent Homogenization Methods of Multi-Layer BCC Lattice Sandwich

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

VAM-based equivalent-homogenization model for 3D re-entrant auxetic honeycomb structures

A Rate-Independent Constitutive Model for Square Honeycomb Core

A comparative study of finite element modeling techniques for dynamic analysis of elastic-viscoelastic-elastic sandwich structures

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Two-scale micropolar plate model for web-core sandwich panels

Accurate thermomechanical analysis of sandwich beams with nonhomogeneous core by quadrature element method

Modeling of Metallic Sandwich Structures