Abstract:Abstract At present, there are many studies on the residual stress field and plastic strain field introduced by surface strengthening, which can well hinder the initiation of early fatigue cracks and delay the propagation of fatigue cracks. However, there are few studies on the effects of these key factors on fretting wear. In the paper, shot-peening (SP) and ultrasonic surface rolling process (USRP) were performed on Ti-6Al-4V plate specimens. The surface hardness and residual stresses of the material were tested by vickers indenter and X-ray diffraction residual stress analyzer. Microhardness were measured by HXD-1000MC/CD micro Vickers hardness tester. The effects of different surface strengthening on its fretting fatigue properties were verified by fretting fatigue experiments. The fretting fatigue fracture surface and wear morphology of the specimens were studied and analyzed by means of microscopic observation, and the mechanism of improving fretting fatigue life by surface strengthening process was further explained. After USRP treatment, the surface roughness of Ti-6Al-4V is significantly improved. In addition, the microhardness of the specimen after SP reaches the maximum at 80 μm from the surface, which is about 123% higher than that of the AsR specimen. After USRP, it reaches the maximum at 150 μm from the surface, which is about 128% higher than that of AsR specimen. It is also found that the residual compressive stress of the specimens treated by USRP and SP increases first and then decreases with the depth direction, and the residual stress reaches the maximum on the sub surface. The USRP specimen reaches the maximum value at 0.18 mm, about − 550 MPa, while the SP specimen reaches the maximum value at 0.1 mm, about − 380 MPa. The fretting fatigue life of Ti-6Al-4V effectively improved after USRP and SP. The surface integrity of specimens after USRP is the best, which has deeper residual compressive stress layer and more refined grain. In this paper, a fretting wear device is designed to carry out fretting fatigue experiments on specimens with different surface strengthening.

Fretting Fatigue Characteristics of Ti-6Al-4V Alloy with a Gradient Nanostructured Surface Layer Induced by Ultrasonic Surface Rolling Process

Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process

Effect of the Ultrasonic Surface Rolling Process on the Fretting Fatigue Behavior of Ti-6al-4v Alloy

On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy

Improved fretting fatigue mechanism of surface-strengthened Ti-6Al-4V alloy induced by ultrasonic surface rolling process

Strategy and Mechanism to Improve the Fatigue Properties of Ti6Al4V ELI Alloy by Microstructure Modulation Combined with Surface Strengthening Process

Effect of ultrasonic surface rolling process on the fatigue performance of the 7075 aluminum alloy

The Effect of Ultrasonic Surface Rolling Process on the Fretting Fatigue Property of GH4169 Superalloy

Designing a gradient structure in a Ni-based superalloy to improve fretting fatigue resistance at elevated temperatures through an ultrasonic surface rolling process

Effect of Contact Stress and Slip Amplitude on Fretting Fatigue Behaviour of Ultrasonic Surface Nanocrystallized TC11 Titanium Alloy

Influence of Ultrasonic Surface Rolling Process and Shot Peening on Fretting Fatigue Performance of Ti-6Al-4V

Surface Modification and Its Effect on Fatigue Performance of Nickel-Based Superalloy Treated by Ultrasonic Surface Rolling Process

Surface rolling deformed severity-dependent fatigue mechanism of Ti-6Al-4V alloy

Face-centered Titanium Induced by Ultrasonic Surface Rolling Process in Ti-6Al-4V Alloy and Its Tensile Behavior

Fatigue-induced Evolution of Nanograins and Residual Stress in the Nanostructured Surface Layer of Ti–6Al–4V

Experimental and FEM study of surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process

Effect of Residual Stress Induced by Ultrasonic Surface Rolling on Fretting Fatigue Behaviors of Ti-6Al-4V Alloy

Fatigue behaviors of ultrasonic surface rolling processed AISI 1045: the role of residual stress and gradient microstructure

Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling

Contribution of Ultrasonic Surface Rolling Process to the Fatigue Properties of TB8 Alloy with Body-Centered Cubic Structure

Grain Growth and Fatigue Behaviors of GH4169 Superalloy Subjected to Excessive Ultrasonic Surface Rolling Process