Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

Cracking elements method for dynamic brittle fracture

Cracking elements: A self-propagating Strong Discontinuity embedded Approach for quasi-brittle fracture

Cracking elements method with a dissipation-based arc-length approach

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A simple hybrid linear and non-linear interpolation finite element for adaptive cracking elements method

Modeling of Dynamic Crack Branching by Enhanced Extended Finite Element Method

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

SOME APPLICATIONS AND RECENT ADVANCES OF NUMERICAL METHODS FOR STRONG DISCONTINUITIES IN QUASI-BRITTLE MATERIAL

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

A multiscale finite element method with embedded strong discontinuity model for the simulation of cohesive cracks in solids

Dynamic brittle crack propagation modeling using singular edge-based smoothed finite element method with local mesh rezoning

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

Extended embedded crack finite element method for modeling localized failures in concrete structures

Direct dissipation-based arc-length approach for the cracking elements method

An XFEM/Spectral element method for dynamic crack propagation

Discontinuous deformation analysis (DDA) simulations of crack propagation, branching and coalescence in brittle materials under dynamic loading