Abstract:As a new alloy design concept, the high-entropy alloy (HEA) and the formation of simple solid solution introduce excellent properties such as high hardness, high strength and corrosion resistance. Investigations have shown that the single solid solution CrCoFeNi alloy possesses good corrosion resistance. The addition of Mo is beneficial to the corrosion resistance of the HEAs for potential industrial applications in 3.5%NaCI (mass fraction) simulating seawater type environments. The major effect of Mo is to promote the pitting potential of the alloy and inhibit the dissolution of the passivation film by forming and retaining molybdenum oxyhydroxide or molybdates (MoO42-). Considering that the cost of pure Co is higher, Ni and Co elements have similar atomic size and valence electron concentration, and the corrosion resistance of pure Ni is higher than that of pure Co, Ni2CrFeMox HEA was designed by replacing Co element with Ni element in CoCrFeNiMox HEA. As the Mo content increases in the Ni2CrFeMox HEAs, the interdendrite is a Cr and Mo rich a phase, and the dendrite is a Cr and Mo depleted fcc phase. The potential difference between interdendrites and dendrites leads to galvanic corrosion, which accelerates the localized corrosion of alloys. Here, a solution heat treatment process is selected to reduce the precipitation phase and improve the corrosion resistance of the alloy. The effects of Mo element and heat treatment on the corrosion resistance of Ni2CrFeMox HEA in 3.5%NaCI solution were tested. The results show that the corrosion resistance of as-cast Ni2CrFeMox HEA is obviously higher than that of 316L stainless steel. The Ni2CrFeMo0.2 alloy has the best corrosion resistance because of its minimum dimensional passive current density and corrosion current density. However, the addition of excessive Mo leads to the precipitation of a phase and galvanic corrosion, which reduces the corrosion resistance of the alloy. After solution treatment, the uniformity of alloy structure and element distribution weakens galvanic corrosion, and the corrosion resistance is obviously improved.

Corrosion Behaviours of Low Mo Ni-(Co)-Cr-Mo Alloys with Various Contents of Co in HF Acid Solution

Microstructure and Corrosion Resistance of Medical Cobalt-Based Alloys

Roles of Mo and Cu on Electrochemical Behaviors of Ni-Base Alloys in Hydrofluoric Acid Solution

Corrosion Resistance of Cu- and Fe-modified Ni–30Co–16Cr–15Mo Alloy in Aqueous Hydrofluoric Acid

Influence of Cu Addition on Corrosion Behavior and Tensile Performance of Ni-30Co-16Cr-15Mo-6Fe Alloy

Effects of Partially Substituting Cobalt for Nickel on the Corrosion Resistance of a Ni–16Cr–15Mo Alloy to Aqueous Hydrofluoric Acid

Influence of Mo concentration on corrosion resistance to HF acid solution of Ni–Co–Cr–Mo alloys with and without Cu

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments

Effects of cold working on corrosion resistance of Co-modified Ni–16Cr–15Mo alloy in hydrofluoric acid solution

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMo X in Aqueous Environments

Effect of Mo on the Mechanical and Corrosion Behaviors in Non-Equal Molar AlCrFeMnNi BCC High-Entropy Alloys

Effect of Cu on the Corrosion Resistance and Electrochemical Response of a Ni–Co–Cr–Mo Alloy in Acidic Chloride Solution

Tailoring Microstructure and Corrosion Behavior of CoNiCrFeMoBSi High-Entropy Alloy Coatings Via Mo Addition

Microstructures, Hardness and Corrosion Behaviors of FeCoNiNb0.5Mo0.5 and FeCoNiNb High-Entropy Alloys

Ex-situ Observation on the Dissolution Behaviour of Ni–16Cr–15Mo and Ni–30Co–16Cr–15Mo Alloys in Hydrofluoric Acid

Effect of Carbon Content on the Corrosion Behavior of Ni-Co-Cr-Mo-Cu Alloys in Both Sulfuric and Hydrochloric Acids

Effect of Mo Element and Heat Treatment on Corrosion Resistance of Ni2CrFeMox High-Entropy Alloy in NaCl Solution

Regulating the passive film of NiCoCrMo alloy in hydrofluoric acid solution by small addition of Cu

The effects of Ni and Al elements on microstructure and mechanical properties of low carbon CoCrMo alloy coatings

Microstructures, Tensile Properties and Corrosion Behaviors of Fe20Cr25NiNb Stainless Steels with Different Al Contents in Supercritical Carbon Dioxide

Effect of alloying elements (Mn, Ti, and Mo) on the corrosion behavior of FeCoNiCr-based high entropy alloy in supercritical water