Transition Metal-Free Thiol–yne Click Polymerization Toward Z-stereoregular Poly(vinylene Sulfide)s

Die Huang,Yong Liu,Shang Guo,Baixue Li,Jia Wang,Bicheng Yao,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1039/c9py00161a

IF: 4.6

2019-01-01

Polymer Chemistry

Abstract:An efficient K3PO4-mediated thiol–yne click polymerization was established, and regio- and stereoregular poly(vinylene sulfide)s with Z-isomers were produced.

What problem does this paper attempt to address?

Thiol-Yne Click Polymerization: Regio- And Stereoselective Synthesis Of Sulfur-Rich Acetylenic Polymers With Controllable Chain Conformations And Tunable Optical Properties

Jianzhao Liu,Jacky Lam,Cathy Ka Wai Jim,Jason C Y Ng,Jianbing Shi,Huimin Su,Kwok Fai Yeung,Yuning Hong,Mahtab Faisal,Yong Yu,Kamsing Wong,Benzhong Tang

DOI: https://doi.org/10.1021/ma1023473

IF: 5.5

2011-01-01

Macromolecules

Abstract:The atom-economical alkyne polyhydrothiolations of aromatic diynes (1) and dithiol (2) catalyzed by rhodium complexes proceed smoothly under mild conditions at room temperature in a regioselective manner, producing sole anti-Markovnikov products of poly(vinylene sulfide)s (3) with high molecular weights (M-w up to 31500) and stereoregularities (E content up to 100%) in high yields (up to 95.2%). The stereostructures of the polymers are readily tuned by engineering control on the sequential addition of monomers during the polymerization process and postmanipulation by light irradiation. All the poly(vinylene sulfide)s are soluble in common organic solvents and exhibit good film-forming ability and high optical transparency. The functional pendants in 1 have endowed 3 with novel properties such as aggregation-enhanced emission characteristics, optical limiting to harsh laser pulses, and ceramization capability to semiconducting nanoparticles. The polymers are thermal and UV curable, enabling the fabrication of fluorescent photopatterns. Their thin films show high refractive indices (n(D) = 1.75-1.70) and low optical dispersions (down to 0.006) at telecom important wavelengths. Their refractive indices vary with their stereostructures and can be modulated by UV irradiation.
Catalyst-Free Thiol–Yne Click Polymerization: A Powerful and Facile Tool for Preparation of Functional Poly(vinylene Sulfide)s

Bicheng Yao,Ju Mei,Jie Li,Jian Wang,Haiqiang Wu,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/ma402559a

IF: 5.5

2014-01-01

Macromolecules

Abstract:The "thio-click" polymerization is a well-expanded concept of click polymerization. Among the click polymerizations, the thiol-yne click polymerization is less developed and still in its infancy stage. In general, UV light, elevated temperature, amine, or transition metal complexes is needed to catalyze the thiol-yne click polymerization, which greatly complicates the experimental operation and limits its application. In this work, a facile and powerful thiol-yne click polymerization was developed, which could be carried out under very mild conditions without using external catalyst. Simply mixing the aromatic diynes (1a-1e) and dithiols (2-4) with equivalent molar ratio in THF at 30 degrees C will readily produce soluble and regioregular functional poly(vinylene sulfide)s (PIa-PIe, PII, and PIII) with high molecular weights (M-w, up to 85 200) in excellent yields (up to 97%) after as short as 2 h. Furthermore, no double addition product of an ethynyl group was found. This catalyst-free thiol-yne click polymerization has remarkably simplified the reaction conditions and will facilitate the preparation of functional materials applied in diverse areas.
Phenol-Yne Click Polymerization: an Efficient Technique to Facilely Access Regio- and Stereoregular Poly(Vinylene Ether Ketone)S

Yang Shi,Tianwen Bai,Wei Bai,Zhe Wang,Ming Chen,Bicheng Yao,Jing Zhi Sun,Anjun Qin,Jun Ling,Ben Zhong Tang

DOI: https://doi.org/10.1002/chem.201702966

2017-01-01

Chemistry - A European Journal

Abstract:Alkyne-based click polymerizations have been well-established. However, in order to expand the family to synthesize polymers with new structures and novel properties, new types of click polymerizations are highly demanded. In this study, for the first time, we established a new efficient and powerful phenol-yne click polymerization. The activated diynes and diphenols could be facilely polymerized in the presence of the Lewis base catalyst of 4-dimethylaminopyridine (DMAP) under mild reaction conditions. Regio-and stereoregular poly(vinylene ether ketone)s (PVEKs) with high molecular weights (up to 35200) were obtained in excellent yields (up to 99.0 %). The reaction mechanism was well explained under the assistance of density functional theory (DFT) calculation. Furthermore, since the vinyl ether sequence acts as a stable but acid-liable linkage, the polymers could be decomposed under acid conditions, rendering them applicable in biomedical and environmental fields.
Metal-Free Alkyne Polyhydrothiolation: Synthesis of Functional Poly(vinylenesulfide)s with High Stereoregularity by Regioselective Thioclick Polymerization

Cathy K. W. Jim,Anjun Qin,Jacky W. Y. Lam,Faisal Mahtab,Yong Yu,Ben Zhong Tang

DOI: https://doi.org/10.1002/adfm.200901943

IF: 19

2010-01-01

Advanced Functional Materials

Abstract:A new synthetic route to sulfur-rich polymers has been developed. The alkyne polyhydrothiolations of 4,4'-thiodibenzenethiol (1) and arylene dipropiolates (2-5) mediated by amines proceed at room temperature in a regioselective fashion, furnishing sole anti-Markovnikov products of poly(vinylenesulfide)s (P1/2-P1/5) with high molecular weights (M-w up to 32 300) and high stereoregularities (Z content up to 81.4%) in high yields (up to 98.2%). Polymers P1/2-P1/4 are soluble in common organic solvents. They are optically transparent, allowing almost all visible and IR light to transmit through. Thanks to the high sulfur contents of the polymers, their films show high refractive indices (n = 1.73-1.70) in the wavelength region of 500 1700 nm as well as high Abbe numbers (nu(D)' up to 539) and low optical dispersions (D' down to 0.002) at wavelengths important for telecommunications. Their refractivities can be further enhanced (n up to 2.06) by metal complexation and their films can be crosslinked by UV irradiation, which enables ready fabrication of fluorescent photopatterns.
Metal-free click polymerizations of activated azide and alkynes

Qiang Wang,Hongkun Li,Qiang Wei,Jingzhi Sun,Jianfeng Wang,Xiao A. Zhang,Anjun Qin,Benzhong Tang

DOI: https://doi.org/10.1039/c2py20797d

IF: 4.6

2013-01-01

Polymer Chemistry

Abstract:The Cu(I)-catalyzed azide-alkyne click polymerization has become a powerful tool for the preparation of functional polytriazoles. However, copper residues in the products could harm the performance of optoelectronic devices and be cytotoxic in biological applications. The complete removal of these residues after reaction from the polymers is therefore necessary but difficult. The metal-free azide-alkyne click polymerization (MFCP) provides a solution to this problem. Currently, the MFCP is facilitated by activated alkynes, and no activated comonomer, i.e. azide, has been reported. In this paper, an activated azide, 4,4'-diazidoperfluorobenzophenone , was designed and synthesized. Compared to the ordinary azide, such a monomer can remarkably accelerate the MFCP with alkynes. Thus, a new MFCP of activated azide and alkyne was established, and polytriazoles with high regioregularity (fraction of 1,4-isomer higher than 82%) and satisfactory molecular weights (M-w up to 34 000) were produced in high yields (up to 95.1%).
Synthesis of Clickable Isotactic Poly(vinyl ether)s through Organocatalytic Stereoselective Cationic Copolymerization

Yun Liao,Xi Yan,Hui Zhu,Shuai Zhou,Saihu Liao

DOI: https://doi.org/10.1002/chem.202403170

2024-11-12

Chemistry - A European Journal

Abstract:By virtue of the high reliability of click chemistry, polymers with clickable groups provide a useful platform for the rapid synthesis of polymer materials with diverse functionalities and architectures. However, the polymerization of clickable vinyl monomers with a concurrent regulation on tacticity remains underdeveloped. Herein, we report the successful development of a stereoselective cationic copolymerization of C‐C triple bond‐containing vinyl ethers with simple alkyl vinyl ethers by employing confined Brønsted acid as catalyst, which allows for the synthesis of alkyne‐functionalized vinyl ether copolymers with high isotacticity (up to 90% m), controlled molecular weight, and variable content of C‐C triple bonds. Further transformation of the pendant clickable alkyne groups via thiol‐yne click reactions and copper(I)‐catalyzed alkyne‐azide cycloaddition reaction enables a modular access to isotactic polymers with various functional groups.

chemistry, multidisciplinary
Ethynylsulfone-Based Spontaneous Amino-yne Click Polymerization: A Facile Tool Toward Regio- and Stereoregular Dynamic Polymers

Xuemei Chen,Rong Hu,Chunxuan Qi,Xinyao Fu,Jia Wang,Benzhao He,Die Huang,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.9b00670

IF: 5.5

2019-01-01

Macromolecules

Abstract:Development of efficient polymerizations is crucial for polymer science from which polymeric materials with versatile properties could be produced. In this work, a new and efficient spontaneous amino-yne click polymerization is successfully established by using activated diynes of bis(ethynylsulfone)s. Compared with the ester-activated diynes, that is, dipropiolates, bis(ethynylsulfone)s could polymerize with all kinds of diamines including aliphatic and aromatic primary and secondary ones under very mild reaction conditions, and soluble and thermally stable poly(beta-aminovinylsulfone)s (PAVSs) with high weight-average molecular weights (M-w up to 160,000) and excellent regio- and stereoregularity (the ratio of E isomers up to 100%) were obtained in high yields (up to 99%). Due to the strong electron-withdrawing ability of sulfonyl groups, the resultant PAVSs show a dynamic property and could undergo the amine exchange, which makes the polymers readily degrade upon addition of monoamines. Moreover, this highly efficient spontaneous amino-yne click reaction could be used to facilely label and decorate proteins. Thus, this work not only establishes a more efficient amino-yne click polymerization, which could be used to label bioconjugates, but also provides a novel strategy to construct regio- and stereoregular dynamic polymers.
Click Polymerization: The Aurora Of Polymer Synthetic Methodology

Yang Shi,Jing Zhi Sun,Anjun Qin

DOI: https://doi.org/10.1002/pola.28419

2017-01-01

Abstract:As an emerged efficient polymerization methodology, the click polymerization plays a significant role in the area of polymer and materials sciences. Similar to the click reaction, the click polymerization enjoys the advantages of high efficiency, mild reaction conditions, and high regio- and stereoselectivity etc. In this highlight, we summarize the recent progress on click polymerizations, with focus on the alkyne-based ones. The challenges and opportunities in this area are also briefly discussed. (C) 2016 Wiley Periodicals, Inc.
Multi-Functional Hyperbranched Poly(vinylene Sulfide)s Constructed Via Spontaneous Thiol–Yne Click Polymerization

Bicheng Yao,Ting Hu,Haoke Zhang,Jie Li,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.5b01868

IF: 5.5

2015-01-01

Macromolecules

Abstract:Multifunctional hyperbranched polymers have found wide applications in diverse areas. However, the preparation of these polymers is generally under harsh polymerization conditions with limited reactions. In this work, we prepared multifunctional hyperbranched poly(vinylene sulfide)s (hb-PVSs) by our established efficient and spontaneous thiol-yne click polymerization for the first time. A series of hb-PVSs with high molecular weights (M-w up to 63100) were obtained in high yields (up to 86%) from the polymerizations of monomers 1 and 2 with equivalent molar ratio in THF at 20 degrees C for 2 h. All the hb-PVSs are regioregular, soluble, and thermally stable. Thanks to the unreacted ethynyl groups on their peripheries, the hb-PVSs could be facilely functionalized by consecutive thiol-yne click reactions. Moreover, the solid films of hb-PVSs exhibit higher refractive index (RI) values (n > 1.64) than those of traditional optical plastics. The TPE-containing hb-PVS shows unique aggregation-enhanced emission characteristic and its aggregates could be used to detect explosives with superamplification effect. Therefore, this work not only proves the universality of our developed spontaneous thiol-yne click polymerization but also provides a powerful and versatile platform for the preparation of multifunctional sulfur-containing polymers.
An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Haiqiang Wu,Wenhui Dong,Zongtan Wang,Bicheng Yao,Ming Chen,Jingzhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-015-5475-x

2015-01-01

Abstract:An air-stable supported Cu(I) catalyst, CuI@PS-Phen, was designed and synthesized. CuI@PS-Phen can efficiently catalyze the click polymerization of diynes a and diazides b to produce soluble and thermally stable polytriazoles with high molecular weights ( M w up to 30800), and low copper residue content (down to 190 ppm) in high yields (up to 94.2%) under mild reaction conditions without the exclusion of oxygen.
Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Haipeng Xu,Jia Ke Jin,Yu Mao,Jing Zhi Sun,Feng Yang,Wang Zhang Yuan,Yong Qiang Dong,Mang Wang,Ben Zhong Tang

DOI: https://doi.org/10.1021/ma702337z

IF: 5.5

2008-01-01

Macromolecules

Abstract:It has been a challenge to synthesize thiol-functionalized polyacetylenes because of the poisoning effect of mercapto group on the early transition-metal catalysts. Rhodium complexes such as [Rh(cod)Cl](2) can catalyze the polymerizations but the products are insoluble and intractable. In this work, we tackled this challenge. Sulfur-containing polyacetylenes with macroscopic processability were successfully synthesized by separating thiol pendant from polyene backbone with a flexible spacer (in PI), capping free mercapto group with acetyl or alkyl group (in P2 or P3), and using a zwitterionic complex Rh+[eta(6)-C6H5(nbd)B-(C6H5)(3)] as catalyst. The soluble polymers were characterized by NMR, IR, UV, PL, and TGA analyses. Due to the specific interactions between thiol group and zinc cation, ZnO nanoparticles were chemisorbed onto the surfaces of polymer films, as verified by AFM analysis. Polymer P2 and ZnO nanoparticles could be readily hybridized by simply mixing the two components in an organic solvent such as chloroform, THF, or DMF. SEM images revealed that the morphology of the film cast from the solution of the P2/ZnO hybrid was dominated by well-dispersed nanoparticles and smooth surface.
Transition-Metal-Free Polymerization Of Bromoalkynes And Phenols

Jie Zhang,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.9b00306

IF: 5.5

2019-01-01

Macromolecules

Abstract:Exploration of efficient and powerful polymerization methodologies is of crucial importance for polymer science. Among the established polymerization methodologies, the polymerization of internal alkynes is less developed and still in its infancy stage. In this work, a new polymerization of internal alkynes of bromoalkynes and phenols is established, and polymers with high weight-average molecular weights (up to 47 600) are obtained in excellent yields (up to 95.2%) in as short as 1 h without using a complex transition-metal catalytic system. The resultant polymers possess good solubility, exhibit high thermal stability, and could display typical aggregation-induced emission (AIE) characteristics upon introduction of tetraphenylethylene, a typical AIE-active luminogen. Moreover, the polymers could be post-modified by a thiophenol derivative because they contain bromovinyl groups in each repeating unit, enabling it to possess a higher refractive index than that of the pristine one. Therefore, it displays a convenient platform for polymer functionalization. This work not only establishes a new polymerization of bromoalkynes and phenols but also provides a powerful strategy for the preparation and modification of functional polymers under mild reaction conditions without using transition-metal catalysts.
Thiol‐Based Click Polymerizations for Sulfur‐Containing Polymers

Die Huang,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1002/9783527823819.ch4

2021-01-01

Abstract:Thiol-based click polymerization with remarkable advantages has been nurtured into a powerful technique for the preparation of sulfur-containing polymers. This chapter briefly summarizes the recent advances in the area. Thanks to the high reactivity of thiol, various thiol-based click polymerizations, including thiol-ene, thiol-yne, thiol-epoxy, thiol-isocyanate, and thiol-halogen click polymerizations, have been developed and found extensively applications in the synthesis of sulfur-containing polymers with advanced structures and diverse functional properties. Thiol-ene click polymerization can produce poly(thioether)s via a radical process or thiol-Michael addition process. Thiol-yne click polymerization, a complement of the former, can proceed in a bis-addition or mono-addition manner to furnish poly(thioether)s or poly(vinyl sulfide)s with different regio-/stereoregularity. Other thiol-based click polymerizations, including thiol-epoxy, thiol-isocyanate, and thiol-halogen click polymerizations, can be applied to prepare poly(β-hydroxythio-ether)s, poly(thiourethane)s, and poly(thioether)s. At last, the challenges and opportunities in this area are also briefly discussed.
SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

An-jun Qin,Cathy K. W. Jim,Jacky W. Y. Lam,Jing-zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1142/s0256767909003765

2009-01-01

Chinese Journal of Polymer Science

Abstract:A new bis(aroylacetylene) containing triazole and fluorene moieties is synthesized by click chemistry. Polycyclotrimerization of the monomer is catalyzed by piperidine in refluxed dioxane, furnishing a regioregular poly(aroylarylene) in a satisfactory yield. The hyperbranched structure of the polymer is characterized spectroscopically with satisfactory results. The polymer enjoys no metal detriment and is soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, dichloromethane (DCM), and N,N-dimethylformamide (DMF).
Synthesis of 1,5-Regioregular Polytriazoles by Efficient NMe4OH-mediated Azide–alkyne Click Polymerization

Yong Liu,Jia Wang,Die Huang,Jie Zhang,Shang Guo,Ronrong Hu,Zujin Zhao,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1039/c5py00186b

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Aromatic alkynes and azides were successfully polymerized under metal-free conditions using tetramethylammonium hydroxide (NMe4OH) as an organocatalyst at room temperature and soluble 1,5-regioregular polytriazoles P3a–P3e with high molecular weights (Mw up to 56 000) were readily produced in high yields (up to 96%).
Spontaneous Amino-yne Click Polymerization: A Powerful Tool Toward Regio- and Stereospecific Poly(β-aminoacrylate)s

Benzhao He,Huifang Su,Tianwen Bai,Yongwei Wu,Shiwu Li,Meng Gao,Rongrong Hu,Zujin Zhao,Anjun Qin,Jun Ling,Ben Zhong Tang

DOI: https://doi.org/10.1021/jacs.7b00929

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Efficient synthesis of poly(enamine)s has been a great challenge because of their poor stability, poor solubility, and low molecular weights. In this work, a spontaneous amino-yne click polymerization for the efficient preparation of poly(enamine)s was established, which could proceed with 100% atom efficiency under very mild conditions without any external catalyst. Through systematic optimization of the reaction conditions, several soluble and thermally stable poly(β-aminoacrylate)s with high molecular weights (Mw up to 64400) and well-defined structures were obtained in excellent yields (up to 99%). Moreover, the polymerization can perform in a regio- and stereospecific fashion. Nuclear magnetic resonance spectra analysis revealed that solely anti-Markovnikov additive products with 100% E-isomer were obtained. The reaction mechanism was well demonstrated with the assistance of density functional theory calculations. In addition, by introducing the tetraphenylethene moiety, the resulting polymers exhibit unique aggregation-induced emission characteristics and could be applied in explosives detection and bioimaging. This polyhydroamination is a new type of click polymerization and opens up enormous opportunities for preparing functional polymeric materials.
Metal‐Free Click Polymerization: Synthesis and Photonic Properties of Poly(aroyltriazole)s

Anjun Qin,Li Tang,Jacky W. Y. Lam,Cathy K. W. Jim,Yong Yu,Hui Zhao,Jingzhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1002/adfm.200801933

IF: 19

2009-01-01

Advanced Functional Materials

Abstract:Regioselective 1,3-dipolar polycycloadditions of tetraphenylethene (TPE)-containing diazides 1-3 and bis(aroylacetylene) 4 are initiated by simple heating, affording poly(aroyltriazole)s (PATAs) PI-PIII with high molecular weights in high yields. The PATAs are completely soluble in common organic solvents and stable at temperatures up to 358 degrees C. Thanks to their TPE units, the polymers show aggregation-induced emission and work as explosive sensors with high sensitivity. The PATAs are optically transparent in the whole visible spectral region. Their refractive indexes can be tuned to a great extent (Delta n approximate to 0.08) by simply changing their alkyl spacer lengths. The modified Abbe numbers of the PATAs are very high (up to 273), indicative of very low optical dispersions in the telecommunication-important wavelength region. UV irradiation through a photomask quenches the light emissions of the polymers, enabling the generation of two-dimensional fluorescent images without development. The polymers can be readily photo-crosslinked, yielding three-dimensional patterns with high resolutions.
Metal-free Click Polymerization of Propiolates and Azides: Facile Synthesis of Functional Poly(aroxycarbonyltriazole)s

Hongkun Li,Jian Wang,Jing Zhi Sun,Rongrong Hu,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1039/c2py00586g

IF: 4.6

2012-01-01

Polymer Chemistry

Abstract:.Azide-alkyne click polymerization is generally catalyzed by the Cu(I) complex, in which the removal of metallic residues after reaction remains challengeable. In this work, a metal-free click polymerization method was developed to avoid this problem. The diazide monomers (9 and 10) could readily react with aromatic and aliphatic dipropiolates (1 and 2) under simple heating to produce functional poly(aroxycarbonyltriazole)s (PACTs), a kind of polyester, with high molecular weights (M-w up to 23 500) and regioregularities (fraction of 1,4-disubstituted 1,2,3-triazole in polymers up to similar to 90%) in excellent yields (up to similar to 99%). The metal-free click polymerization also propagates smoothly in an open atmosphere without protection from oxygen and moisture. The PACTs are thermally stable, with 5% loss of their weights at temperatures higher than 335 degrees C. Thanks to the contained ester groups, the polymers can be rapidly degraded in the presence of potassium hydroxide aqueous solution. The PACT containing tetraphenylethene units exhibits a unique feature of aggregation-induced emission and can function as a fluorescent chemosensor to detect explosives in a superamplified manner.
Nickel-Catalyzed Azide-Alkyne Click Polymerization Toward 1,5-Regioregular Polytriazoles

Die Huang,Yong Liu,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.3c02000

IF: 5.5

2023-01-01

Macromolecules

Abstract:The click polymerization has emerged as a powerful tool for the synthesis of functional polymers. Among the reported click polymerizations, the Cu(I)- and Ru(II)-catalyzed azide-alkyne ones have received considerable attention. To further develop such click polymerization, a new catalyst is desirable. In this work, we used Cp2Ni/Xantphos/Cs2CO3 to catalyze the azide-alkyne click polymerization (NiAACP) under mild conditions, and 1,5-regioregular polytriazoles (PTAs) with weight-average molecular weights as high as 67,900 were produced in high yields (up to 96.7%) in only 30 min. The obtained PTAs process high thermal stability, and their glass-transition temperatures range from 38.9 to 168.0 degrees C. The relationship between the polymer structures and their refractive indices was also investigated. Moreover, PTAs with aggregation-induced emission (AIE) features and chirality were produced through the incorporation of the AIE moiety of tetraphenylethene and the chiral moiety of 2,2 '-substituted 1,1 '-binaphthyl into the polymer chains, respectively, indicative of the great potential of the NiAACP in constructing functional polymeric materials.
Click Polymerization: Progresses, Challenges, And Opportunities

Anjun Qin,Jacky Lam,Benzhong Tang

DOI: https://doi.org/10.1021/ma101064u

IF: 5.5

2010-01-01

Macromolecules

Abstract:Chemical transformations of small molecules have served as a rich source of reactions for the development of new polymerization processes, and "click" reaction has the potential to become a powerful polymerization technique. We herein give a brief account of the research efforts devoted to the development of click reaction into a new polymerization process. Remarkable progresses have been made in recent years in the exploration of metal-mediated and metal-free click polymerization systems and in the syntheses of linear and hyperbranched polytriazoles with regioregular molecular structures and advanced functional properties. We also discuss the existing limitations and challenges as well as the promising opportunities and directions in fostering the click polymerization into a versatile tool for the construction of new macromolecules with well-defined structures and multifaceted functionalities.

Transition Metal-Free Thiol–yne Click Polymerization Toward Z-stereoregular Poly(vinylene Sulfide)s

Thiol-Yne Click Polymerization: Regio- And Stereoselective Synthesis Of Sulfur-Rich Acetylenic Polymers With Controllable Chain Conformations And Tunable Optical Properties

Catalyst-Free Thiol–Yne Click Polymerization: A Powerful and Facile Tool for Preparation of Functional Poly(vinylene Sulfide)s

Phenol-Yne Click Polymerization: an Efficient Technique to Facilely Access Regio- and Stereoregular Poly(Vinylene Ether Ketone)S

Metal-Free Alkyne Polyhydrothiolation: Synthesis of Functional Poly(vinylenesulfide)s with High Stereoregularity by Regioselective Thioclick Polymerization

Metal-free click polymerizations of activated azide and alkynes

Synthesis of Clickable Isotactic Poly(vinyl ether)s through Organocatalytic Stereoselective Cationic Copolymerization

Ethynylsulfone-Based Spontaneous Amino-yne Click Polymerization: A Facile Tool Toward Regio- and Stereoregular Dynamic Polymers

Click Polymerization: The Aurora Of Polymer Synthetic Methodology

Multi-Functional Hyperbranched Poly(vinylene Sulfide)s Constructed Via Spontaneous Thiol–Yne Click Polymerization

An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Transition-Metal-Free Polymerization Of Bromoalkynes And Phenols

Thiol‐Based Click Polymerizations for Sulfur‐Containing Polymers

SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

Synthesis of 1,5-Regioregular Polytriazoles by Efficient NMe4OH-mediated Azide–alkyne Click Polymerization

Spontaneous Amino-yne Click Polymerization: A Powerful Tool Toward Regio- and Stereospecific Poly(β-aminoacrylate)s

Metal‐Free Click Polymerization: Synthesis and Photonic Properties of Poly(aroyltriazole)s

Metal-free Click Polymerization of Propiolates and Azides: Facile Synthesis of Functional Poly(aroxycarbonyltriazole)s

Nickel-Catalyzed Azide-Alkyne Click Polymerization Toward 1,5-Regioregular Polytriazoles

Click Polymerization: Progresses, Challenges, And Opportunities