Abstract:As the core component of new energy vehicles, the safe operation of polymer electrolyte fuel cells has become more important with the rapid development of the new energy field. Since polymer electrolyte membrane (PEM) works at a hydrated environment, the mechanical properties of its hydrated state must remain stable. At present, studies have shown that the increase of water content will reduce the mechanical properties of materials, such as the decrease of Young's modulus, but the microscopic mechanism has not been elucidated. This presents a challenge to the work to develop novel PEMs. We tried to use the method of coarse-grained (CG) molecular dynamics (MD) simulation to study the microscopic mechanism of the mechanical properties of basic PEM Nafion membrane under different water content conditions. The purpose of this study is to seek to demonstrate the microscopic mechanism by which macroscopic mechanical properties are determined from the MD perspective, thereby providing general guidance for the future development of novel PEMs. More specifically, we tested the Nafion membrane (CG model with 4 beads on the main chain and 2 beads on the side chain) under tensile and compressive stress (strain 0-0.5) at different water contents (2-14). Quantified micro-parameters make it possible to establish macro-micro relationships. Considering that our chosen Nafion is the basic model, it may have good generality to other complex models. At the macroscopic level, our results show that increasing the water content reduces Young's modulus of the material. The decreasing rate of Young's modulus shows a slowing trend. This is in good agreement with previous research. At the microscopic level, our results show that the coordination number between any two types of atoms except water molecules within the same volume decreases with increasing water content, suggesting that the increase in water molecules forces other atoms to away from each other, thereby increasing the spacing between molecules. Therefore, the dominant force on this distance scale, that is, the electrostatic attraction between positive and negative ions is reduced. We have a reason to think that this is the main micromechanical factor to change macroscopic mechanical properties. In addition, the results of polymer chain entanglement parameters show that the degree of entanglement of polymer chains deepened with the increase of water content. The complex entangled structure will increase the difficulty of the polymer deformation. We believe that this is one of the micromechanical factors to decrease the Young's modulus. The study of these mechanisms may help in the development of new Nafion materials.

Performance Improvement of Electrolytic Air Dehumidification Systems with High‐water‐uptake Polymer Electrolyte Membranes

Heat and mass transfer in a polymeric electrolyte membrane-based electrochemical air dehumidification system: Model development and performance analysis

Effects of Moisture Dehumidification on the Performance and Degradation of a Proton Exchange Membrane Fuel Cell

A new approach for air dehumidification at refrigerator temperatures: Electrolytic vapor dehumidifier with Proton Exchange Membrane (PEM)

Operation parameter investigation and optimization for electrolyte membrane dehumidifier based on orthogonal experiment and numerical simulation

Performance improvement induced by membrane treatment in proton exchange membrane water electrolysis cells

Anisotropic membrane with high proton conductivity sustaining upon dehydration

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation

Enhanced properties of Nafion nanofibrous proton exchange membranes by altering the electrospinning solvents

Building extra transport channels in mixed-matrix membrane for air dehumidification

Dual-functional phosphoric acid-loaded covalent organic framework for PEMFC self-humidification: Optimization on membrane electrode assembly

Numerical Study on the Moisture Transfer Characteristics of Membrane-Based Liquid Desiccant Dehumidifiers: Resistance Distribution and Concentration Polarization

Molecular Dynamics Study on the Microscopic Mechanism of Mechanical Properties of Nafion Membrane

Physical characteristics analysis and performance comparison of membranes for vacuum membrane dehumidifiers

In-situ humidification performance evaluation of various membranes for proton exchange membrane fuel cell

Trifluoromethanesulfonimide-based hygroscopic semi-interpenetrating polymer network for enhanced proton conductivity of nafion-based proton exchange membranes at low humidity

Performance assessment of a flat-sheet membrane-based dehumidifier with serpentine flow channels: An experimental study

Surface-modified PVA/PVDF hollow fiber composite membrane for air dehumidification

Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance

Nanoparticles filled PVA/PVDF hollow fiber membrane towards enhanced performance for air dehumidification

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes