Abstract:By enhancing the support force exerted by the resin on the multifilament composite and reducing the load span within the range of 2–4 mm, it is possible to effectively minimize or eliminate overall buckling that may occur during the compression process of the multifilament composite. This results in a higher secant modulus under the same level of deformation. Additionally, it reduces the step difference between the compression and tension regions in the cross‐section of carbon fiber formed by the buckling, while the compression strength of the carbon fiber multifilament increases from 2.32 to 4.78 GPa. The deformation characteristics exhibited by the hierarchical structure in composites and their influence on compressive properties are investigated by controlling the deformation of carbon fiber multifilament under axial compressive loading. Our findings reveal that the deformation curve of carbon fiber composite materials under axial compression loads is nonlinear. Specifically, for 12 K high‐strength and medium‐modulus carbon fiber multifilament, when the compression load exceeds approximately 600 N, the buckling of individual fibers leads to shear deformation that damages the interface between the fiber and resin. Consequently, the compressive deformation of the multifilament composites transitions from elastic to plastic deformation. By enhancing the support force exerted by the resin on the multifilament composite and reducing the load span within the range of 2–4 mm, it is possible to effectively minimize or eliminate the overall buckling that may occur during the compression process of the multifilament composite. This results in a higher secant modulus under the same level of deformation. Additionally, it reduces the step difference between the compression and tension regions in the cross‐section of carbon fiber formed by the buckling, while the compression strength of the carbon fiber multifilament increases from 2.32 to 4.78 GPa. Highlights Characteristics of compression deformation of carbon fiber multifilament. Regulation of the degree of buckling of carbon fiber multifilament. Cross‐section morphology under different compression failure mechanisms. Influence of the degree of buckling on compressive properties of carbon fiber.

Comparative Investigation of Carbon Fiber Filaments in Off-Axis Transverse Cutting Between Flexible-Support and Non-Support Method under Pre-Tension

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Experimental Study on Effects of Fiber Cutting Angle in Milling of High-Strength Unidirectional Carbon Fiber–reinforced Polymer Laminates

Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure mechanisms

Comparison of 3D Carbon/Carbon Composites with Respect to Interfacial Properties

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Characteristics of compressive failure behavior of polyacrylonitrile‐based carbon fiber multifilament

Experimental and computational analysis of bending fatigue failure in chopped carbon fiber chip reinforced composites

Role of stable‐structural yarns and fabrics on the tensile and bending performance of carbon fiber resin composites

Novel fiber fracture criteria for revealing forming mechanisms of burrs and cracking at hole-exit in drilling Carbon Fiber Reinforced Plastic

A comparison of fabric structures for carbon fiber reinforced composite: Laminated and orthogonal woven structures

Friction and damage of carbon fiber in tow-metal friction during the formation of flexible-oriented three-dimensional composite preforms

Exploring the influence of specimen types on the intralaminar fracture behavior of fiber-reinforced polymer matrix composites

Investigation on the longitudinal compressive strength of unidirectional carbon fiber/nanoparticles reinforced polymer composites using FFT-based method

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Effects of fiber orientations on fracture mechanisms in rotary ultrasonic drilling of carbon fiber reinforced plastic laminates

The failure mechanism of carbon fiber-reinforced composites under longitudinal compression considering the interface